Home Accents Holiday TY480-1611-5 User manual

OMS THD SKU# 1001 766 864
Model # TY480-1611-5
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 70in 360 Light LED Jumbo Sleigh with
Presents. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products
available for your home decoration needs. Thank you for choosing
Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
70in 360 Light LED Jumbo Sleigh with
Presents
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 28.8Watts
(0.24Amps). Do not overload. Do not connect to another lighting string, decorative outfit
or other electrical products. Before you use or re-use this product, inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Back Side Panel 2
B Front Side Panel 2
C Front & Back Runner 2
D Front & Back Runner 2
E Front Panel 1
F Seat Panel 1
G Back Panel 1
H Present-a 1
I Present-b 1
J Present-c 1
K Stabilizing Bar 3
L Bow Tie 1
Hardware List
Locater Name Qty.
M Bolt & WingNut 12
N Ground Stake 8
O Anchoring String 4
P Plastic Tie 15
Q Spare Fuse 8
R Spare Bulb 12
M N O P Q R
A B C
D E F
G H I
J K L

A
SSEMBLY
1 Assembling the Runners
Align the Front and Back Runners (C,D) for both sides. Secure using
the Bolt and Wingnut (M) provided. Insert the ends of the Stabilizing
Bars (K) into the corresponding holes on the left and right runners to
secure them in position.
2 Assembling the Side Panel
Insert the connecting rods at the bottom of the Seat Panel (F) into the
connecting holes on the top of the left and right Runners.
3 Assembling the Front & Back Panels to the Runners
Insert the two connecting hooks on the back side of the Left and Right
Front Side Panel (B) into the connecting holes on the front of the Left
and Right Back Panels (A). Insert the connecting rods at the bottom of
the left and right Side Panels into the connecting holes on the left and
right Runners.
4 Assembling the Side Panels and Seat Panels
Insert the connecting rods of the Back Panel (G) into the connecting holes
on the back part of the two side panels and the Seat Panel. Insert the metal
rods of the Front Panel (E) into the connecting holes on the front part of the
Side Panels and the Seat Panel.
5 Securing the Sleigh
Secure the front part of the two side panels to the runners using the Bolt
and Wingnuts (M) provided.
Insert the tie strings of the bow into the side panel of sleigh and twist the
two ends together to secure. Secure other areas around the parts with
the Plastic Ties (P) over the metal frames.
6 Assembling the Presents
Insert the connecting rod on the top back corner of the Present-c (J) into
the connecting hole on the inside of the right Side Panel. Insert the
connecting rods on the bottom of the Present-c (J) into the connecting
holes on the middle of the Seat Panel.
7 Assembling the Presents to the Sleigh
Insert the connecting rods on the bottom of Present-b (I) into the
connecting holes on the inside of the Back Panel and the back top
edge of the Present-c (J). Insert he connecting rods on the bottom of
Present-a (H) into the connecting holes on the lower front edge of
Present-b (I) and the front top edge of Present-c (J).
8 Securing the Sleigh to the Ground
There are 4 Anchoring String (O) for securing the product in windy
conditions.
Attach the clipped end of each Anchoring String to the top four corners of
the Sleigh. Slide the looped end of the Anchoring String over the hooked
end of the Ground Stake (N) and pull tight then place the Ground Stakes
into the ground out and away from the Sleigh. Place the remaining 4
Ground Stakes at 4 corners of the Sleigh over the metal frame then into
the ground.