Home Decorators Collection 44001-HBC User manual

USE AND CARE GUIDE
20-INCH INDOOR CEILING FAN
THANK YOU
to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators Collection!
1-800-986-3460
HOMEDEPOT.CA
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday.
Item #1001 689 750
Model #44001-HBC
#1001 689 749
#44001-HBCB

2
Table of Contents ................................................................ 2
Safety Information............................................................... 2
Warranty ............................................................................... 3
Pre-Installation .................................................................... 3
Installation............................................................................ 6
Assembly............................................................................ 7
Operation ........................................................................... 9
Care and Cleaning............................................................. 10
Troubleshooting................................................................. 10
To reduce the risk of electric shock, ensure the electricity has
been turned off at the circuit breaker or fuse box before you
begin.
All wiring must be in accordance with the National Electrical
Code ANSI/NFPA 70 and local electrical codes. Electrical
electrician.
The outlet box and support structure must be securely mounted
and -LUylnoesU)sbl53(gk9.51gnitroppusylbaile
rfoelbapac
listed outlet boxes marked “Acceptable for Fan Support of 15.9
kg (35 lbs) or less.”
Do not place objects in the path of the blades.
Safety Information
Table of Contents
READ AND SAVE THESE INSTRUCTIONS.
installation should be performed by a qualified licensed
WARNING: To reduce the risk ofpersonal injury, do not
WARNING:
WARNING: To avoid possible electrical shock,
turn the electricity off at the main fusebox before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
CAUTION: To reduce the risk ofpersonal injury,
use only the screws provided with the outlet box.
CAUTION: To avoid personal injury or damage to the fan
and other items, use caution when working around or
cleaning the fan.
bend the blade brackets when installing the brackets,
balancing the blades, or cleaning the fan. Donot insert
foreign objects in between rotating fan blades.
To reduce the risk of fire, electric shock
or personal injury, mount to an outlet box marked
“acceptable for fan support of 15.9 kg (35 lbs)
or less”.
The fan must be mounted with aminimumCAUTION: of
10 ft. (3. 05m ) of clearance from the trailing edge of the
blades to the floor.
After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into the
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding conductor
on one side of the outlet box and ungrounded conductor on
the other side of the outlet box.
All set screws must be checked and retightened where
necessary before installation.
Changes or modifications not expresslyCAUTION:
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
WARNING:
shock, do not use this fan with any solid-state speed
control device.
To reduce the risk of fire or electric

3
Pre-Installation
Warranty
TOOLS REQUIRED
NOTE: These are approximate measures. They do not
include the amps and wattage used by the light kit.
Phillips
screwdriver
Flat head
screwdriver
Adjustable
wrench
Electrical
tape
Wire
cutter
Step ladder
Contact the Customer Service Team at 1-800-986-3460 or visit WWW.HOMEDEPOT.CA
We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period
of a lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic
blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the
date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or
superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All
costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident, misuse, improper installa-
tion, or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions, this warranty does not cover
any changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type give their longest useful
life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. We hereby disclaim
any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by
law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty.
Some provinces do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall
not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as
may otherwise be accorded by law. Some provinces do not allow the exclusion of incidental or consequential damages, so the above
exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from
province to province. This warranty supersedes all prior warranties. Shipping costs for any return of the product as part of a claim on the warranty
must be paid by the customer.
SPECIFICATIONS
28.7
24.9
29.2
357
266
254
Size Speed Volts CFM
Fan Power
Consumption
(Without Lights)
WATT
(Higher Is Better)
CFM/WATT
Net
Weight
Gross
Weight Cubic Feet
20 in.
Low
120
8.7
2.5 cu. ft.
Medium 10.7
High 14.5
8.37 lbs
(3.8 kgs)
12.24 lbs
(5.55 kgs)
WWW.HOMEDEPOT.CA
Please contact 1-800-986-3460 for further assistance.

4
Pre-Installation (continued)
HARDWARE INCLUDED
: Hardware not shown to actual size.
AA
BB
CC
DD
GG
Mounting Screw 2
Wire nuts 3
1
Tapping Screw
1
Green gruond screw
Part Description Quantity
Hanging Board (preassembled)
NOTE
EE 4
Hanging Board Screw (preassembled)
FF 1
Instructions
AA BB CC
DD EE
HH II
GG
HH
II
1
1
AAA Battery
Transmitter
FF
4

5
PACKAGE CONTENTS
Pre-Installation (continued)
WWW.HOMEDEPOT.CA
Please contact 1-800-986-3460 for further assistance.
A Fixture body 1
Part Description Quantity
A

6
Installation
MOUNTING OPTIONS
WARNING:
personal injury, mount to outlet box marked “acceptable
for fan support of 15.9 kg (35 lbs) or less” using the
screws provided with the outlet box. An outlet box
not be acceptable for fan support and may need to be
If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:
Disconnect the power by removing the fuses or turning off
the circuit breakers.
Secure the outlet box directly to the building structure.
Use the appropriate fasteners and materials. The outlet box
and its bracing must be able to fully support the weight
of the moving fan (at least 15.9 kg). Do not use a plastic
outlet box.
The illustrations below show three different ways to mount the
outlet box.
Outlet Box
Outlet Box
Recessed
Outlet
Box
Provide Strong
Support
Ceiling
Mounting
Plate
To reduce the risk of fire, electric shock, or
commonly used for the support of lighting fixtures may
replaced. If in doubt, consult a qualified electrician.

7
Assembly - Standard Ceiling Mount
Installing the hang boardRouting the wires
Unlock the hanging board screws (EE) from the hanging
board (DD), and remove the hanging board (DD) from the
fixture body (A).
21
Attach the hang board (DD) to the outlet box (not included)
with the two mounting screws (AA).
Secure the hang board (DD) to the ceilings with the
tapping screws (CC).
Make sure power is off before attempting
installation.
WARNING:
WWW.HOMEDEPOT.CA
Please contact 1-800-986-3460 for further assistance.
EE
A
DD
AA
CC
DD

8
)deunitnoc(tnuoMgnilieCdradnatS-ylbmessA
Making the electrical connections and installing the finished product lamp
3
GND
Connect the ground wire from the branch circuit to the green
ground screw (GG) on the hang board (DD) and set aside 6 in.
to connect to the ground wire from house.
Attach the hang buckle from the to the
hang board (DD).
NOTE:Alw re nuts (BB) to connect wires and push
all e res and connections back into the outlet
Connect the ture wires as follows:
Attach the to the hang board (DD),
and secure it with the hanging board screws (EE).
WHITE WIRE
BLACK WIRE
GROUND WIRE
GROUND WIRE
FROM FIXTURE
FROM FIXTURE
FROM FIXTURE
WHITE WIRE
BLACK WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
Hang buckle
EE
BB
A
GG
DD

9
Operation
INSTALLING THE BATTERY
BUTTON FUNCTION DESCRIPTION
WWW.HOMEDEPOT.CA
Please contact 1-800-986-3460 for further assistance.
Remove the transmitter (II) battery back cover.
Install two AAA batteries (HH) into the transmitter (II),
then put the back cover back on.
HH
II
Back cover
1. Dimming -
2. Dimming +
3. Light temperature
(Adjust to the color temperature of the set value,3000K, 4000K, 5000K)
4. Lower color temperature
5. Increase color temperature
6. All OFF
7. Light ON/OFF
8. Fan OFF
9. Set the fan speed: 1
10. Set the fan speed: 2
11. Set the fan speed: 3
12. Set the fan speed: 4
13. Set the fan speed: 5
14. Set the fan speed: 6
15. Timing function: 1H
16. Timing function: 2H
17. Timing function: 4H
18. Direction of rotation of the fan blade
19. Direction of rotation of the wind guide wheel
REVERSE SWITCH OPERATING INSTRUCTIONS
The reverse switch is located on the surface of the Remote control.
This switch controls directions: forward (Default switch) or to
switch the reverse function
NOTE: Wait for the fan to stop before reversing the
direction of the blade rotation.
Warm weather
(counterclockwise direction) A downward air flow creates a cooling
effect. This allows you to set your air conditioner on a warmer
setting without affecting your comfort.
Cool weather
(clockwise direction) An upward air flow moves warm air off the
ceiling. This al lows you to set your heating unit on a cooler setting
without affecting your comfort.
12
3
4
6
9
12
15
19
16
13
10
7
5
8
11
14
17
18
NOTE: On start up, your ceiling fan will oscillate back and
forth. This is NORMAL OPERATION for a DC ceiling fan as it
goes through its calibration cycle. The fan is NOT DEFECTIVE.

10
Care and Cleaning
Troubleshooting
Problem Solution
The fan will not start. Check the main and branch circuit fuses or breakers.
Check the line wire connections to the fan and switch wire connections in the switch housing.
Check the battery in the remote control.
Ensure you are in the normal range of 0-20 feet.
The fan is noisy. Ensure all motor housing screws are snug.
Ensure the screws that attach the fan blade bracket to the motor hub are tight.
Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing.
Allow a 24-hour “breaking in” period. Most noises associated with a new fan disappear during this time.
Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling.
Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box.
Because ofthe fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade
attachments twicea year. Make sure they are secure. It is not necessary to remove the fan from the ceiling.
Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage
plating is sealed with alacquer to minimize discoloration or tarnishing.
You can apply a lightcoat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a
light application of shoe polish.
You do not need to oil your fan. The motor has permanently lubricated, sealed ball bearings.
WARNING: Make sure the power is off before cleaning
your fan.
the motor or wood, or possiblycause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. The
Always unplug the fan before cleaning, disassembly or servicing.
The fan moves
backwards and
forwards when turned
on.
This is normal start-up procedure for DC motor fans. The partial movement during start-up is the result of the DC
motor aligning the internal magnetic poles for proper motor operation. This design saves electricity and allows
the fan to operate more quietly than standard AC motor fans.
□