Home Skinovations Silk'n FaceFX User manual

ANTI-AGING
FaceFaceFXTM
S’ FFX™
INSTRUCTIONS FOR USE
EN

1
English
Fig. 1
L
G
K
J

2
English
Treating with Silk’n FaceFX for the First Time
The skin should be, clean, dry and free of any powder, gel or cream.
If necessary a light serum may be applied thinly to the skin to help glide the device. Allow
serum to absorb into the skin before treating. See “cleaning the Silk’n FaceFX” section.
Connect the ADAPTOR PLUG to the FaceFX
Connect the FaceFX to an electrical outlet
Press the POWER ON/OFF SWITCH. The green READY/TREATMENT INDICATOR LIGHT
(K) will start blinking, and shortly afterwards will be lit steadily.
Your FaceFX is ready for treatment.
Place the TREATMENT SURFACE on your skin. The LED light will automatically activate.
Apply light pressure while slowly moving the FaceFX APPLICATOR in small circular motions.
The TREATMENT SURFACE temperature will slowly increase.
Perform the treatment for 5-7 minutes on each area.
It is recommended to apply a small amount of a moisturizing cream on the treated skin areas
after each session and to massage it gently in circular motions.
Before You Start
Before using Silk’n FaceFX for the first time, please read this manual in its entirety. Pay particular
attention to sections on device use procedures, device operation, and after-use procedures.
What is Silk’n FaceFX?
Silk’n FaceFX is a hand held light emitting diode (LED) device for facial treatments of periorbital
wrinkles, reducing pore size and temporary improvement of the appearance of the skin. The light
emitted by Silk’n FaceFX stimulates deep skin tissue and achieves facial FaceFXvenation. Typical
areas for Silk’n FaceFX treatment are the neck, the cheeks, the forehead, and around the eyes.

3
English
Silk’n FaceFX device description
Silk’n FaceFX device consists of an APPLICATOR and an ADAPTOR.
Silk’n FaceFX APPLICATOR is a hand held unit that contains a TREATMENT SURFACE at the
APPLICATOR tip, an ON/OFF SWITCH and an INDICATOR PANEL.
ATreatment Surface
BOn/O Switch
CIndicator Panel
DAPPLICATOR
EPLUG
FAdaptor
GStandBy - indicator light
HBASE UNIT socket
LSystem Error - indicator light
KReady/Treatment - indicator light
JSpare - indicator light
The green Ready/Treatment - indicator light (K) illuminates when pressing the ON/OFF switch.
The green StandBy - indicator light (G) illuminates when the device is turned o.
The yellow System Error - indicator light (L) illuminates when a system error/malfunction occurs.
Package contents
Upon opening the Silk’n FaceFX package, you will find the following:
FaceFX APPLICATOR
Adaptor
User manual

4
English
Safety with Silk’n FaceFX
To protect your skin, a temperature sensor is embedded in the treatment tip of the Silk’n
FaceFX. This sensor ensures the skin’s surface will not exceed 41°C / 106°F.
When to avoid using Silk’n FaceFX?
Certain conditions may temporarily prevent the use of Silk’n FaceFX. Avoid using Silk’n FaceFX:
on raised dark brown or black spots, birth marks, moles or warts, lesions, open wounds or
active infections, such as cold sores. Wait for the aected area to heal before treating.
On abnormal skin conditions caused by diabetes or other systemic or metabolic diseases. on
treatment areas if you have a history of herpes outbreaks in the area of treatment, unless you
have consulted your physician and received preventative medication prior to use.
if your facial skin was treated with a physician-prescribed drug within the past 6 months, please
consult with your physician
Reducing the risk of injury
Keep Silk’n FaceFX out of the reach of children.
Keep Silk’n FaceFX out of the reach of persons with reduced physical, sensory or mental
capabilities.
Keep Silk’n FaceFX away from water!
Do not use or store Silk’n FaceFX in a wet environment
(e.g. near a shower or a bathtub)!
Keep the device and its adaptor dry
Do not use Silk’n FaceFX if the ADAPTOR or the APPLICATOR is damaged!
If the APPLICATOR is damaged, make sure it is replaced with an original part from Home
Skinovations!
The APPLICATOR contains a dedicated transformer. Never replace the APPLICATOR with
another plug!
If you are unsure if FaceFX is safe for you to use, please consult with your doctor or
dermatologist.
Possible side eects using FaceFX
When used according to the instructions, side eects and complications associated with use of
Silk’n FaceFX are rare.

5
English
However every cosmetic procedure, including those designed for home use, involve some
degree of risk. Therefore it is important that you understand and accept the risks and
complications that can occur with energy based systems designed for home use.
Silk’n FaceFX treatments are generally very well-tolerated. Most users sense the moderate
heat applied by the device during use, with no further discomfort.
Minor Skin Discomfort
Your skin may become slightly irritated after using Silk’n FaceFX.
This is a typical and transient phenomenon. If the irritation does not disappear within three
days, please consult a physician or a dermatologist.
Skin Redness
Your skin may become slightly red right after using FaceFX. This should disappear a few
hours after treatment.
Protect your Silk’n FaceFX
Store the device in a clean area free of dust.
Do not cover the ventilation slots during use.
Never shake or drop Silk’n FaceFX or subject it to severe shocks.
Silk’n FaceFX is sensitive to environmental temprature during use. Do not expose the
FaceFX to environmental tempratures lower than 10°C / 59°F or higher than 35°C / 95°F
during use.
Silk’n FaceFX can not tolerate extreme change of temperature.
When moved from a cold environment (under 10°C / 50°F) to a warm environment, avoid
use for approximately 3 hours.
Do not expose Silk’n FaceFX to direct sunlight or UV light for long periods of time.
Silk’n FaceFX is designed for occasional home use (as opposed to exhaustive commercial or
professional use). Avoid such exhaustive use.

6
English
The benefits of Silk’n FaceFX
The outcome of using Silk’n FaceFX when following instructions correctly will be the reduction
of facial fine lines, reducing pore size and improving the appearance of the face.
Best results can be expected 3-7 weeks after completing the recommended course of treatment.
Silk’n FaceFX facial treatment areas
Typical areas for Silk’n FaceFX treatment are the cheeks, forehead, neck, and around the eyes.
Skin Treatment the FaceFX Way
First Steps with Silk’n FaceFX
Plan your Silk’n FaceFX treatment for best results
The eciency of the results varies from person to person and according to the frequency of use.
Some may see results sooner than others.
A single FaceFX session usually takes 15-20 minutes in which you should gently glide the FaceFX
applicator slowly over the desired treatment area. During the procedure you should feel
gentle heat penetrating deep into the skin.
Initial Silk’n FaceFX treatment course: For the first month (4 weeks), treatment should be
performed 3 times a week for 15-20 minutes each time. (5-7 minutes on each treatment zone).
Silk’n FaceFX maintenance regime: Use Silk’n FaceFX once a week for 15-20 minutes.

7
English
What to expect when treating with Silk’n FaceFX?
During a Silk’n FaceFX session it is normal to experience and feel:
A Sensation of Warmth – During the Silk’n FaceFX session you may feel slight warmth.
This is normal and should disappear up to an hour after the session.
Some Mild Red Color – After each Silk’n FaceFX session you may notice a slight reddening
of the skin (mild erythema) over the treated area. This is normal and should fade within an
hour or two.
A Fan Noise - It is normal to hear a fan noise turning on and o during FaceFX treatments.
This is a safety feature that helps regulate the skin temperature during use.
Best results can be expected 3-7 weeks after completing the recommended course of treatment.
After treating with Silk’n FaceFX
When FaceFX session has been completed turn FaceFX o by pressing the POWER ON/OFF
SWITCH.
Treating with Silk’n FaceFX for the First Time
The skin should be, clean, dry and free of any powder, gel or cream.
If necessary a light serum may be applied thinly to the skin to help glide the device.
Allow serum to absorb into the skin before treating. See “cleaning the Silk’n FaceFX” section.
Remove Silk’n FaceFX APPLICATOR, ADAPTOR and other components from box.
Connect the ADAPTOR PLUG to the FaceFX
Connect the FaceFX to an electrical outlet
Press the POWER ON/OFF SWITCH. The green READY/TREATMENT INDICATOR
LIGHT (K) will start blinking, and shortly afterwards will be lit steadily.
Your FaceFX is ready for treatment.
Place the TREATMENT SURFACE on your skin. The LED light will automatically activate.
Apply light pressure while slowly moving the FaceFX APPLICATOR
in small circular motions. The TREATMENT SURFACE temperature
will slowly increase.
Perform the treatment for 5-7 minutes on each area.
It is recommended to apply a small amount of a moisturizing cream
on the treated skin areas after each session and to massage it gently
in circular motions.

8
English
Maintenance of Silk’n FaceFX
Cleaning the Silk’n FaceFX
After each session, it is recommended to clean your Silk’n FaceFX device:
Turn Silk’n FaceFX o by pressing the POWER ON/OFF SWITCH.
Unplug Silk’n FaceFX from the electrical outlet
Disconnect the ADAPTOR PLUG from the FaceFX
Allow cooling down of its TREATMENT SURFACE.
Use a dry, clean cloth and a specially formulated cleaner for electronic equipment togently wipe
the device and especially its TREATMENT SURFACE.
Never immerse Silk’n FaceFX or any of its parts in water!
Never clean the FaceFX or any of its parts under the tap or in the dishwasher.
Storage
Store the clean device and all its parts in a dry place, at a temperature of between -10°C to
60°C / 14°F to 140°F
Disposal
Dispose of the packaging at a recycling point which sorts materials by type.
Products marked with this symbol should not be disposed of along with household
refuse! You are legally bound to dispose of old appliances separately from household
refuse. Information about where old appliances can be disposed of free of charge is
available from your local authorities.
Disconnect the FaceFX from the electrical outlet
Disconnect the ADAPTOR PLUG from the FaceFX
After each session it is recommended that you clean your FaceFX device, especially the
APPLICATOR TIP (See Section: “Cleaning FaceFX”).

9
English
Troubleshooting
This chapter summarizes the most common problems you could encounter. If you are unable to
solve the problem with the information below, contact your local Silk’n Customer Service Center
for further support.
SolutionPossible CauseProblem
Connect the Plug (E) to the Applicator Plug
and the adaptor to AC electrical outlet
The Adaptor is not
connected
Silk’n FaceFX does
not work
Contact your local Silk’n customer Service
center
The Applicator is
broken
Connect the Plug (E) to the Applicator Plug
and the adaptor to AC electrical outlet
The Adaptor is not
connected properly
Silk’n FaceFX
suddenly switches
o
No action is requiredThis is normalDevice temperature
rises during use
Press the ON/OFF Switch twice to switch
the Applicator o and on again. If Ready/
Treatment Mode - indicator light (K) does
not illuminate again, contact your local Silk’n
customer Service center
The Applicator
needs to be reset
Ready/Treatment
Mode - indicator
light (K) does not
illuminate when
pressing the ON/
OFF Switch
Press the ON/OFF Switch twice to switch
the Applicator o and on again. If System
Error - indicator light (L) illuminates again,
contact your local Silk’n customer Service
center
Malfunction of the
Applicator
The Yellow System
Error - indicator
light (L) is lit.

10
English
Customer Service
1. For Israeli customers: For more information about Silk’n™ products please enter
www.silkn.co.il.
If your device is broken, damaged, in need of repair, or for any other user assistance, please
contact Silk’n™ Customer Service: 1-700-700-309 cont[email protected]
Manufacturer: Home Skinovations Ltd. Tavor Building,
Shaar Yokneam POB 533 Yokneam 2069206 Israel

11
English
Specications
Rated voltage (Adaptor) 100V - 240V
Model: KSA24A1200150Hx
Rated frequency (Adaptor) 50Hz/60Hz
Rated adaptor 12Vdc; 1500 mA
Applied part Type BF
Protecting rating IP30 (EN60529)
Storage condition Temperature: -40°C to 70°C /-40°F to 158°F
Relative humidity: 10% - 90%
Atmospheric pressure: 500 to 1060 hPa
Classified standard
IEC 60601-1-2:2007
EN 60601-1-2:2007
Operating condition Temperature: 10°C to 35°C / 50°F to 95°F
Relative humidity: 15% to 90%
Atmospheric pressure: 700 to 1060 hPa
Light source Light Emitting Diodes
Wavelengths peak emission wavelength: 645nm
Degree of protection against
electric shock
Class II.

12
English
Labeling
Degree of protection against ingress water: IP30 ordinary
This device is not suitable for use in the presence of flammable
anesthetic mixture with air or with Oxygen or Nitrous Oxide.
The symbol on the label axed to this device means
“Attention, consult accompanying documents”.
Degree of protection against electric
shock: type BF applied part
WEEE - Waste Electrical and
Electronic Equipment
CSA Mark
CE Mark
Keep dry
Manufacturer

13
English
EMC Testing Summary Results


14
English
Copyright © 2013 Home Skinovations Ltd. All rights reserved.
Print date: Novmber 2013
Home Skinovations Ltd. reserves the right to make changes to its products or specifications
to improve performance, reliability, or manufacturability. Information furnished by Home
Skinovations Ltd. is believed to be accurate and reliable at the time of publication. However,
Home Skinovations Ltd. assumes no responsibility for its use. No license is granted by its
implication or otherwise under any patent or patent rights of Home Skinovations Ltd.
No part of this document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the express written permission of Home
Skinovations Ltd.
Data is subject to change without notification.
Home Skinovations Ltd. has patents and pending patent applications, trademarks, copyrights, or
other intellectual property rights covering subject matter in this document. The furnishing of
this document does not give you any license to these patents, trademarks, copyrights, or other
intellectual property rights except as expressly provided in any written agreement from Home
Skinovations Ltd.
Specifications are subject to change without notice.
Home Skinovations Ltd.
Tavor Building, Shaar Yokneam POB 533
Yokneam 2069206
ISRAEL
Inno Essentials International
Donk 1B,
2991 LE Barendrecht
The Netherlands


[e-mail]
www.silkn.co.il