Home Skinovations Silk'n Reveal User manual

1
ENEN
Copyright 2017 © Home Skinovations Ltd
All rights reserved.
Legal Notice
Home Skinovations Ltd reserves the right to make changes to its
products or specications to improve performance, reliability, or
manufacturability. Information furnished by Home Skinovations Ltd is
believed to be accurate and reliable at the time of publication. However,
Home Skinovations Ltd assumes no responsibility for its use. No license
is granted by its implication or otherwise under any patent or patent
rights of Home Skinovations Ltd.
No part of this document may be reproduced or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the
express written permission of Home Skinovations Ltd. Data is subject to
change without notication.
Home Skinovations Ltd has patents and pending patent applications,
trademarks, copyrights, or other intellectual property rights covering
subject matter in this document. The furnishing of this document does
not give you any license to these patents, trademarks, copyrights, or
other intellectual property rights except as expressly provided in any
written agreement from Home Skinovations Ltd. Specications are
subject to change without notice.
SILK’NandtheSILK’NlogoareregisteredtrademarksofHomeSkinovations
Ltd Tavor Building, Shaar Yokneam POB 533, Yokneam 2069206, ISRAEL
www.silkn.com, [e-mail].
Revit Reveal UM NA 2289A inside ED98-07 release.indd 1 1/19/2017 11:46:14

2
ENEN
Table of Contents
1. Get to know your Silk’n Reveal ........................................ 3
2. Contraindications & warnings ......................................... 4
3. Do not use Silk’n Reveal if: ............................................... 7
4. What to expect with Silk’n Reveal ................................... 7
5. Possible side eects.......................................................... 8
6. Before your rst treatment .............................................. 8
7. Get started!...................................................................... 10
8. Maintenance.................................................................... 11
9. Spare parts and consumables........................................ 13
10. Troubleshooting ............................................................. 13
11. Customer service............................................................. 13
12. Warranty .......................................................................... 14
13. Disposal ........................................................................... 14
14. Specications .................................................................. 14
15. Signs and symbols .......................................................... 15
16. Labeling........................................................................... 48
Revit Reveal UM NA 2289A inside ED98-07 release.indd 2 1/19/2017 11:46:14

3
ENEN
1. Get to know your Silk’n Reveal
Silk’n Reveal is an electrical device. As such, it should be used with
special attention to safety. Before using the device for the rst time, be
sure to read all warnings, contraindications and safety precautions. It is
important that you read and understand the instructions on how to
use the device including after-use procedures, and follow them strictly.
Werecommend youre-familiariseyourself with theinstructionsin thismanual
before each treatment. You can also go to www.silkn.com to watch a short
video on how to get the very best from your Silk’n Reveal.
1.1 Package contents
Your Silk’n Reveal package includes these items.
yYour device yStorage case
yPack of lters yAC/DC adapter with cable
y2Treatment tips (Fine and Coarse) yUser manual
ySpare rubber caps yWarranty card
1.2 Device description
Silk’n Reveal is an over the counter device intended for self-treatment in the
home. The device exfoliates the skin’s upper layer to freshen and cleanse your
skin. Refer to the diagram at the front of this manual to see the location of
each feature.
yTreatment tip (#1) yControl button (#4)
yRubber cap (#2) yDevice socket (#5)
yFilter (#3) yAdapter with cable (#6)
Together, the dual technologies of microdermabrasion exfoliation and
vacuum stimulation both cleanse your skin and improve your skin tone.
Microdermabrasion exfoliation
Provides gentle, non-abrasive exfoliation to allow for smoother, fresher
skin.
Helps improve skin tone, texture and elasticity.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 3 1/19/2017 11:46:14

4
ENEN
Helps reduce the appearance of age spots, ne lines around the eyes,
and acne scars.
Vacuum stimulation
Helps stimulate for smoother, more youthful looking skin.
Collects the dead skin cells for disposal.
1.3 Intended use
Silk’n Reveal is a home device for the self-treatment of:
Ageing skin of the face, neck and hands
Fine facial lines
Skin discoloration
Dark spots and shallow scars
Dull and sun-damaged skin
Do not use for any purpose other than as described in this manual.
2. Contraindications & warnings
Be sure to read this section carefully and take note of the
warnings and contraindications.
EThis device must not be used by: children, people under
the age of 16, those with limited physical, sensory or
psychological capacities, or people lacking experience or
knowledge in how to use the device. Children should be
supervised toensure thattheydo notplay withthe device.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 4 1/19/2017 11:46:14

5
ENEN
Do not use Silk’n Reveal if you have:
ERosacea.
EPoorly controlled endocrine disorders, such as diabetes
and thyroid conditions.
EAbnormal skin conditions caused by diabetes, systemic
or other metabolic diseases.
E
Received radiation therapy or chemotherapy treatments
within the past 3 months, or have areas of potential skin
malignancies.
E
Used physician-prescribed drugs on your skin within the
past 6 months.
E
Anyotherconditionwhich,inthe opinionofyour physician
or dermatologist, would make it unsafe for you to be
treated.
Do not treat areas that have:
E
Active eczema, psoriasis, lesions, open wounds or
infections (cold sores), moles or warts, abnormal skin
conditions caused by systemic or metabolic diseases
(diabetes for example).
EA history of herpes outbreaks.
ETraumatized or injured skin.
KHad recent exposure to the sun without protection (wait
1 day) ; for tanned or sunburnt skin, wait 7 days.
Additional warnings
EDo not use on nipples or genitals.
ERecommended use is no more than twice a week.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 5 1/19/2017 11:46:14

6
ENEN
E
Use the low suction mode if you experience any
discomfort.
EStop use immediately if your skin is very red.
ERemove all jewelry before treatments.
KTry not to expose recently treated areas of skin to sunlight.
Be sure to apply sunscreen SPF 30 or higher when out in
the sun.
A
Always ensure that your hands and skin are dry before
operating the device or touching the adapter plug.
A
Keep your device away from water or liquids! Do not use
near bathtubs, showers, basins or other vessels containing
water. Do not place or store the device where it can fall, be
pushed or placed anywhere near water or any other liquid.
There is a risk of electrocution. Unplug immediately if the
device comes into contact with any uids, and contact
Customer Service.
ANever leave the device unattended when plugged
into an outlet. Keep the AC/DC adapter accessible at
all times, so it can be removed from the socket easily
in case of emergency. Unplug the device immediately
after use.
EDo not carry the device by the AC/DC adapter cable.
EIf the device malfunctions, unplug immediately.
E
Do notattempt tomodify, openor repair yourdevice. You
may expose yourself to dangerous electrical components
and may cause serious harm to yourself.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 6 1/19/2017 11:46:14

7
ENEN
3. Do not use Silk’n Reveal if:
The adapter, attachments or accessories for this device are not
recommended by Home Skinovations Ltd.
The device has a damaged cable or plug. Keep the power cable away
from heated surfaces.
You see or smell smoke when it is in use.
The treatment surface, or device casing is cracked or coming
apart.
The device is not working or appears to be damaged in any other way.
In such cases, contact Silk’n Customer Service.
4. What to expect with Silk’n Reveal
During a treatment session it is normal to experience or feel:
A humming sound from the device: This is the suction pump
working.
Some slight redness of the skin: This should subside within a few
hours, or up to one day.
EStop use immediately if your skin is very red.
EContact your physician, if you experience any complications.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 7 1/19/2017 11:46:14

8
ENEN
5. Possible side eects
If you follow the instructions fully and pay attention to all warnings and
contraindications,complicationsand sideeects areuncommon. Allcosmetic
procedures, including those designed for home use, involve some degree of
risk. Therefore, it is important that you understand and accept the risks and
complications that may occur.
Skin redness
You may experience dilation of the supercial blood capillaries. This may
result in some redness for a few days. Additionally, some capillaries may
present red spots that will also subside with time. In such cases, immediately
cool the area with cold water.
Bruising
You may experience slight bruising which should disappear after 2-3 days.
Consult your physician if you experience any persistent symptoms.
6. Before your rst treatment
To use your Silk’n Reveal, follow these steps:
1. Remove the device and other components from the box.
2. Plug the adapter cable into the device socket and plug the adapter
into an electrical outlet.
3. Read the rest of this section for information on treatment areas, the
treatment plan, and when to use the ne and coarse treatment tips.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 8 1/19/2017 11:46:14

9
ENEN
6.1 Treatment areas
We recommend that you start with the low suction mode, and move to the
high mode after a few uses. If you have any discomfort, work the treatment
area in low suction mode.
Treatment area Recommendations
Forehead, cheeks and chin Move the device over your skin from the center
outwards and towards the hairline.
Eyes and nose
Use short upward strokes for the area around
your eyebrows. Avoid the eyelids.
For the nose area, use straight downward
strokes following the curve of the nose and the
contour of the cheekbones.
Neck Use smooth, downward strokes and work the
whole of the neck area.
6.2 Treatment Plan
To start with, you should only pass the treatment tip over the same
patch of skin 2-4 times. When your skin is used to the treatment, you
may increase the number of times to 4-6.
We recommend you do not use the device more than once a week.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 9 1/19/2017 11:46:14

10
ENEN
6.3 Silk’n Reveal’s Fine and Coarse treatment tips
The device has two treatment tips, marked ‘Fine’or ‘Coarse’. We recommend
that you start with the Fine treatment tip.
Use the Fine treatment tip for general treatment or delicate nishing.
Use the Coarse treatment tip for heavy duty exfoliation.
To change treatment tips:
1. Make sure the device is not connected to an
electrical outlet.
2. Remove the current treatment tip (#1) from the
device by gripping and pulling it, then replace with
the other treatment tip. Make sure thetreatment tip
is rmly in place before use. You will hear a click so
you know it’s in place.
7. Get started!
You're on your way to fresher, smoother skin!Treating with Silk’n Reveal is easy.
Just follow these steps for each area you wish to treat. Each treatment should
take about 5 minutes.
7.1 Recommended precautions
Before you treat an area for the rst time, do a spot test on a small area
of skin and then wait 24 hours. If you have no adverse reaction, go
ahead and treat that area.
Use the low suction mode for your rst 2-3 treatments.
Stop immediately if you feel any discomfort.
1
Revit Reveal UM NA 2289A inside ED98-07 release.indd 10 1/19/2017 11:46:14

11
ENEN
7.2 Treatment steps
1. Make sure your skin is clean, dry and free from powder, cream or gel.
2. Make sure that the rubber cap (#2), filter (#3), and treatment tip (#1) are
rmly in place. For your rst few treatments, be sure to use the Fine
treatment tip.
3. Press the control button (#4) to turn on the device.Your Silk’n Reveal is
ready for use in low suction mode.
4. Apply the treatmenttip rmly to your skin so that you feel the suction.
5. Work each area as recommended in section“6.1 Treatment areas”.
6. To move from low to high suction mode, press the control button
again.
7. Toswitch o the device after treatment,short pressthe controlbutton
once or twice, depending on which suction mode you are in.
8. Unplugthe device andstoreit initsoriginal box.Please referto section
“8. Maintenance”.
7.3 After treatment
Try not to expose recently treated areas of skin to sunlight. Be sure to
apply sunscreen SPF 30 or higher when out in the sun.
You may wish to apply a facial mask, or apply a day or night cream.
8. Maintenance
It isimportant toclean yourSilk’nReveal device and storeit properlyaftereach
treatment.
LFirst, unplug the device.
LTo clean the device, wipe with a clean, dry cloth. Never use
acetone or other abrasive uids, because they will damage
your device.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 11 1/19/2017 11:46:14

12
ENEN
LTo clean the treatment tip, rst remove it from the device,
wash with soap and water, then dry thoroughly.
LTo clean the lter, rst remove it from the device, brush away
any debris using a soft brush, and place it back on the device.
LAfter cleaning, we recommend you store the device in its
original box.
EWith the exception of the treatment tips, never immerse your Silk’n
Reveal in water.
8.1 Replacing the lter
The filter needs cleaning or replacing due to the build-up of discarded skin.
We recommend that you do this every few treatments.
To replace the lter:
1. Remove the treatment tip from the device . You
will then see the rubber cap and the small black
filter.
2. Remove the rubber cap (#2), and then remove
the filter (#3).
3. To clean the filter, brush o any debris, then
place it back on the device. To change a filter,
remove the current filter and insert a new one.
4. Place the rubber cap back into position, then
put the treatment tip back on the device, making sure that it is rmly
connected.
8.2 Replacing the treatment tip and rubber cap
We recommend that you replace the treatment tip every 12 months.
There is no particular need to replace the rubber cap.
3
2
Revit Reveal UM NA 2289A inside ED98-07 release.indd 12 1/19/2017 11:46:14

13
ENEN
9. Spare parts and consumables
You can order more filters and treatment tips from our website
www.silkn.com. For replacement rubber caps or AC/DC adapters, please
contact Silk'n Customer Service.
10. Troubleshooting
Do not attempt to open or repair your Silk’n Reveal.You may expose yourself
todangerous electrical componentsand causeseriousharmtoyourself.Itwill
also void your warranty.
Problem Checks
My device does not
start.
Make sure the adapter is properly connected to the
device, that it is plugged into an electrical outlet,
and that you have pressed the control button.
I don't feel any suction
when the device
touches my skin.
Make sure the device is on, and check that the
lter, rubber cap and treatment tip are placed on the
device correctly.
EOnly authorized personnel are permitted to perform repairs. For
problems or queries, please contact Silk'n Customer Service.
EIf the device fails, unplug immediately.
11. Customer service
For more information about this or other Silk’n products, visit our website:
www.silkn.com. This manual is also available as a PDF download from:
www.silkn.com/manuals.
Report unexpected operations or events, or any other problem with
your device to Customer Service. Contact us on our toll free number:
1-877-367-4556.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 13 1/19/2017 11:46:14

14
ENEN
12. Warranty
Refer to your Silk'n warranty card.
13. Disposal
NHelp protect the environment. Do not dispose with household
waste and be sure to follow your country's laws for the disposal of
electrical items.
14. Specications
Model no. H4201
Technology Air vacuum lling tip
Input power 12 V DC, 0.2A
System weight 110 gm
Transport & storage between uses
and storage condition
Temperature: -40°C to +70°C
Relative humidity : 10% to 90%
Atmospheric pressure: 500 to 1060 hPa
Operating conditions
Temperature: 10°C to 40°C
Relative humidity: 30% to 75%
Atmospheric pressure: 700 to 1060 hPa
Adapter models and rating
RSS1002-060120-W2
SAW12-120-0500UD
Input: 100-240VAC, 50-60 Hz, 0.3A
Output: 12V, 0.5A
Expected service life of the
equipment 3 years
Compliance CFR 47 FCC Part 15 subpart B
Revit Reveal UM NA 2289A inside ED98-07 release.indd 14 1/19/2017 11:46:14

15
ENEN
15. Signs and symbols
Products marked with this symbol full the requirements of the
EU Directives.
Class III. The appliance is supplied from an extra-low voltage
power source.
For indoor use only.
Read the Instructions for Use.
Do not dispose with household waste. Dispose in accordance
with your country's laws and help protect the environment. In
accordance with the WEEE Directive.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 15 1/19/2017 11:46:14

16
FRFR
Droit d’auteur 2017 © Home Skinovations Ltd.
Tous droits réservés.
Mentions légales
Home Skinovations Ltd se réserve le droit d’apporter des changements
à ses produits ou aux spécications de ses produits an d’en améliorer
la performance, la abilité ou la productibilité. Tous les renseignements
fournis par Home Skinovations Ltd au moment de leur publication ont
été établis de bonne foi et sont exacts et ables. Home Skinovations
Ltd décline néanmoins toute responsabilité au regard leur utilisation.
Aucune licence n'est implicitement accordée ou accordée autrement
en vertu de tout brevet ou droit de brevet de Home Skinovations Ltd.
Aucune partie de ce document ne peut être reproduite, ni transmise
sous quelque forme que ce soit ou par quelque procédé électronique
ou mécanique, sans l’accord écrit de Home Skinovations Ltd. Les
données sont sujettes à changement sans préavis.
Home Skinovations Ltd détient les brevets et les brevets en instance,
la marque de commerce, les droits réservés ou d’autres droits de
propriété intellectuelle aérents au sujet de ce document. La délivrance
de ce document ne vous confère aucune licence sur ces brevets,
marques commerciales, droits d'auteur ou autres droits de propriété
intellectuelle hormis ceux expressément accordés par contrat écrit avec
Home Skinovations Ltd. Les caractéristiques techniques sont sujettes à
changement sans préavis.
SILK'NetlelogoSILK'NsontdesmarquesdéposéesdeHomeSkinovations
Ltd. Tavor Building, Shaar Yokneam POB 533, Yokneam 2069206, ISRAEL
www.silkn.com, [e-mail].
Revit Reveal UM NA 2289A inside ED98-07 release.indd 16 1/19/2017 11:46:14

17
FRFR
Table des matières
1. En savoir plus sur votre Silk'n Reveal ............................ 18
2. Contre-indications & avertissements............................ 20
3. N’utilisez pas Silk’n Reveal dans les cas suivants : ....... 23
4. À quoi faut-il s’attendre avec le Silk’n Reveal............... 23
5. Eets secondaires possibles .......................................... 24
6. Avant votre première séance......................................... 24
7. Commencez ! ................................................................... 26
8. Maintenance.................................................................... 28
9. Pièces détachées et consommables .............................. 29
10. Dépannage ...................................................................... 30
11. Service à la clientèle ....................................................... 30
12. Garantie ........................................................................... 31
13. Élimination ...................................................................... 31
14. Caractéristiques techniques .......................................... 31
15. Signes et symboles ......................................................... 32
Revit Reveal UM NA 2289A inside ED98-07 release.indd 17 1/19/2017 11:46:14

18
FRFR
1. En savoir plus sur votre Silk'n Reveal
Silk’n Reveal est un appareil électrique. Ainsi, il doit être utilisé avec
précaution pour des raisons de sécurité. Avant d’utiliser cet appareil
pour la première fois, assurez-vous de lire tous les avertissements, contre-
indications et précautions de sécurité. Il est important que vous lisiez et
compreniez les instructions sur la façon d'utiliser cet appareil, y compris les
procédures post-utilisation, et que vous les respectiez scrupuleusement.
Nousvous recommandonsdevous familiariserà nouveauavec lesinstructions
dans ce mode d'emploi avant chaque soin.Vous pouvez également aller sur
www.silkn.com et regarder une courte vidéo sur comment tirer le meilleur
parti de votre Silk’n Reveal.
1.1. Contenu du paquet
Votre emballage Silk'n Reveal comprend les articles suivants :
yVotre appareil yÉtui de rangement
yLot de ltres yAdaptateur AC/DC et câble
y2 Pointes de traitement
(Délicate et Rugueuse) yMode d'emploi
yEmbouts de rechange
en caoutchouc yCarte de garantie
1.2. Description de l'appareil
Silk’n Reveal est un appareil en vente libre destiné à être utilisé pour un auto-
traitement à domicile. L’appareil exfolie la couche supérieure de l’épiderme
pour rafraîchir et nettoyer votre peau. Veuillez vous reporter à diagramme
placé sur l’avant de ce mode d’emploi pour voir l’emplacement de chaque
fonction.
yPointe de traitement (no 1) yBouton de commande (no 4)
yEmbout en caoutchouc (no 2) yPrise de l'appareil (no 5)
yFiltre (no 3) yAdaptateur avec câble (no 6)
Ensemble, les technologies duales d’exfoliation par microdermabrasion et de
stimulation par aspiration nettoient votre peau tout en améliorant votre teint.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 18 1/19/2017 11:46:14

19
FRFR
Exfoliation par microdermabrasion
Une exfoliation douce et non-abrasif pour une peau plus lisse et plus
fraîche.
Son action contribue à améliorer la tonicité, la structure et l’élasticité
de la peau.
Aide à réduire l’apparition de tâches de vieillesse, de ridules autour des
yeux, et de cicatrices d’acné.
Aspiration stimulante
Son action stimulante procure une peau plus lisse et rajeunie.
Capture les cellules de peau mortes pour élimination.
1.3. Usage prévu
Silk’n Reveal est un appareil à usage domestique pour l’auto-traitement de :
Taches de vieillesse sur le visage, le cou, et les mains.
Fines ridules apparaissant sur le visage.
La décoloration de la peau.
Taches brunes et cicatrices supercielles.
Peaux ternes ou endommagées par le soleil.
Ne l'utilisez pas à des ns autres que celles décrites dans ce mode d 'emploi.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 19 1/19/2017 11:46:15

20
FRFR
2. Contre-indications & avertissements
Assurez-vous de lire attentivement cette section et prenez note
des avertissements et des contre-indications.
E
L’appareil ne doit pas être utilisé par : les enfants, les
personnes de moins de 16 ans, les personnes ayant des
déciences physiques, sensorielles ou psychologiques, ou
les personnes manquantd’expérienceou de connaissances
sur la façon d’utiliser l’appareil. Les enfants doivent être
surveillés an qu'ils ne jouent pas avec l'appareil.
N’utilisez pas Silk'n Reveal si vous avez :
EUne peau atteinte de rosacée.
EPrésentez des troubles endocriniens mal contrôlés, tels
qu'un diabète ou des maladies thyroïdiennes.
E
En cas de problèmes de peau causés par un diabète
ou par d’autres maladies systémiques ou métaboliques.
E
Une radiothérapie ou chimiothérapie reçue au cours des
3 derniers mois, ou des zones sujettes à des malignités
dermiques.
EUtilisé des médicaments prescrits par le médecin pour
votre peau au cours des 6 derniers mois.
E
Toute autre aection qui, de l'avis de votre médecin
ou de votre dermatologue, rendrait ce traitement
potentiellement dangereux pour vous.
Revit Reveal UM NA 2289A inside ED98-07 release.indd 20 1/19/2017 11:46:15