Home Styles 20 05506 0943 User manual

Part List
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
20 05506 0943
Kitchen Island
M.
Drawer
2 pcs.
H.
Plinth
1 pc.
C.
Middle Panel
1 pc.
G.
Base
1 pc.
Tool(s) required for assembly: Phillips screwdriver, Level
Cartons 20 05506 0941 and 0942 are also needed for assembly.
M4x25
Machine Screw
2 pcs.
Handle
5 pcs.
M x415
Wood Screw (short)
24 pcs. (+1 extra)
M x425
Wood Screw
4 pcs. (+1 extra)
Adjustable Pin
8 pcs. (+1 extra)
Cam Lock Screw
25 pcs. (+2 extra)
M x425
Wood Screw (long)
32 pcs. (+1 extra)
Cam Lock
25 pcs. (+4 extra)
M4x35
Machine Screw (long)
8 pcs.
M x145
Wood Screw
for Hinge
12 pcs. (+1 extra)
Hinge
2 pcs.
Hardware List
Refer to later page(s) of these
instructions for drawers assembly.
K.
Drawer
1 pc.
L.
Drawer
1 pc.
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
M x630
Head Cap Bolt
2 pcs. (+1 extra)
M x645
Head Cap Bolt (long)
4 pcs. (+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.

Figure 1
Figure 2
Cam Lock Screw
Wood Screw
A
B
D
E
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the screws until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
F
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Top (A), Side Panels (B), (D) and
Back Panels (E), (F), then tighten. (See Figure 1)
STEP 2
Attach Plinth (H) to Base (G) with Wood Screws. (See Figure 2)
H
G
Assembly Instructions 2/10

STEP 4
Attach Base (G) to unit with Cam Locks.
F
E
Cam Lock
Cam Lock
Figure 3
STEP 3
Attach Back Panel (E) to
Back Panel (F) with Cam Locks. (See Figure 3)
G
Assembly Instructions 3/10

C
A
STEP 5
Place Top (A) upside down
on a soft cloth.
Attach Middle Panel (C) to Top (A)
with Cam Locks.
Attach unit from Step 4 to unit
with Head Cap Bolts. (See Figure 4)
STEP 6
Attach Side Panel (D) to unit with Head Cap Bolts (long).
Attach Side Panel (D) to unit with Cam Locks.
Head Cap Bolt
Head Cap Bolt (long)
Cam Lock
Cam Lock
D
Assembly Instructions 4/10
Figure 4

Cam Lock
STEP 7
Attach Side Panel (B) to unit with Head Cap Bolts (long).
Attach Side Panel (B) to unit with Cam Locks.
STEP 8
Turn unit to its front side onto a soft cloth.
B
Assembly Instructions 5/10
Head Cap Bolt (long)

Assembly Instructions 6/10
STEP 10
Turn unit from Step 8 to its upright position.
Insert Adjustable Pins into side panel and middle panel at desired level.
(See Figure 6)
Place Shelves (J) into position.
Attach Door (I) to unit with Wood Screws for Hinge
into pre-drilled holes, then tighten. (See Figure 7) Figure 7
Figure 6
J
J
I
Adjustable Pin
Wood Screw for Hinge
Wood Screw for Hinge
Figure 5
STEP 9
Attach Hinges to Door (I) with Wood Screws for Hinge into pre-drilled holes, then tighten.
(See Figure 5)
I

Assembly Instructions 7/10
K1.
Drawer Front
1 pc.
K2.
Drawer Back
1 pc.
K3.
Drawer Side
1 pc.
K4.
Drawer Side
1 pc.
K5.
Drawer Bottom
1 pc.
Drawer (K)
STEP 12
Slide Drawer Bottom (K5) into groove.
Attach Drawer Bottom (K5) to
unit with Wood Screws (short).
K5
Wood Screw (short)
Part List
STEP 13
Attach Handle with Machine Screws (long).
Machine Screw (long)
Handle
K1
K2
K3
K4
Wood Screw (long)
Bottom
Roller at back
STEP 11
Attach Drawer Front (K1) and
Drawer Back (K2) to Drawer Side (K3)
with Wood Screws (long).
Attach Drawer Side (K4) to unit
with Wood Screws (long).

Assembly Instructions 8/10
L1.
Drawer Front
1 pc.
K2.
Drawer Back
1 pc.
K3.
Drawer Side
1 pc.
K4.
Drawer Side
1 pc.
K5.
Drawer Bottom
1 pc.
Drawer (L)
L1
K2
K3
K4
Wood Screw (long)
Bottom
STEP 14
Attach Drawer Front (L1) and
Drawer Back (K2) to Drawer Side (K3)
with Wood Screws (long).
Attach Drawer Side (K4) to unit
with Wood Screws (long).
STEP 15
Slide Drawer Bottom (K5) into groove.
Attach Drawer Bottom (K5) to
unit with Wood Screws (short).
K5
Roller at back
Wood Screw (short)
Part List
STEP 16
Attach Handle with Machine Screws (long).
Machine Screw (long)
Handle

Assembly Instructions 9/10
M1.
Drawer Front
2 pcs.
M2.
Drawer Back
2 pcs.
M3.
Drawer Side
2 pcs.
M4.
Drawer Side
2 pcs.
M5.
Drawer Bottom
2 pcs.
Part List
Drawer (M)
M1
M2
M3
M4
Wood Screw (long)
Bottom
STEP 17
Attach Drawer Front (M1) and
Drawer Back (M2) to Drawer Side (M3)
with Wood Screws (long).
Attach Drawer Side (M4) to unit
with Wood Screws (long).
STEP 19
Attach Handle with Machine Screws (long).
Machine Screw (long)
Handle
STEP 18
Slide Drawer Bottom (M5) into groove.
Attach Drawer Bottom (M5) to
unit with Wood Screws (short).
M5
Roller at back
Wood Screw (short)

Assembly Instructions 10/10
Figure 9 Figure 10
Up Front
Back
Down
Figure 11
Left
Right
STEP 21
If needed, adjust door up or down by removing the front Wood Screws for Hinge and
loosening slightly the back Wood Screws for Hinge from side panel,
adjusting door up or down and re-installing screws. (See Figure 9)
If needed, adjust door left to right. (See Figure 10)
If needed, adjust door front to back. (See Figure 11)
Figure 8
K
I
L
STEP 20
Attach Handle to Door (I) with Machine Screws.
Slide Drawers (K), (L) and (M) into position.
Level unit by adjusting the adjustable levelers on bottom of unit.
(See Figure 8)
Machine Screw
Handle
M
M

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319