Home Styles Dining Table 20 0 4 0033 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
20 0 4 0033665
Dining Table
A.
Top
1 pc.
B.
Leg
4 pcs.
C.
Stretcher
1 pc.
Tool(s) required for assembly: Level
IMPORTANT
Carefully remove all the parts from the carton and place them
individually on a soft cloth to prevent scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
This product is made of aluminum. Do not use power tools
above 8 volts to assemble and only tighten bolts until snug.
Over tightening can damage the aluminum.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M8x30
Bolt
4 pcs. (+1 extra)
Flat Washer
16 pcs. (+1 extra)
Spring Washer
16 pcs. (+1 extra)
M8
Nut
16 pcs. (+1 extra)
Cap
16 pcs. (+1 extra)
Cover
1 pc.
Wrench
1 pc.

Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Wrench as the bolts may need to be tightened in the future.
B
B
B
B
C
Nut
Spring Washer
Flat Washer
STEP 1
Attach Legs (B) to Stretcher (C) with Flat Washers, Spring Washers and Nuts, tightening Nuts
only halfway. (See Figure 1)
Figure 1

Assembly Instructions 3/3
STEP 2
Place Top (A) upside down on a soft cloth.
Insert Bolts into pre-drilled holes in Top (A), then tighten. (See Figure 2)
Attach unit to Top (A) with Flat Washers, Spring Washers and Nuts,
tightening Nuts only halfway.
Tighten all Nuts used in Steps 1 and 2.
Cover all Nuts with Caps. Figure 2
Cap
Nut
Spring Washer
Flat Washer
Bolt
Figure 3
STEP 3
Turn table over to its upright position.
Cover umbrella hole with Cover.
Level table by adjusting the adjustable levelers on bottom of legs. (See Figure 3)
Cover

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319