Home Styles Barnside 88 5516 13 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
Hardware List
88 5516 13
Barnside Media Tower
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
(Please refer to the last page of these
instructions for drawer assembly steps)
Small Hex Wrench
1 Pc.
Hex Wrench
1 Pc. Cam Lock
16 Pcs. (+4 extra)
Cam Lock Screw
16 Pcs. (+1 extra)
Head Cap bolt
20 Pcs. (+1 extra)
Wood Screw (short)
6 Pcs. (+1 extra)
Wood Screw (long)
8 Pcs. (+1 extra)
Machine Screw
2 Pcs.
Pull Handle
1 Pc.
A.
Top
1 Pc.
B.
Top
1 Pc. C.
Frame
1 Pc.
F.
Frame
1 Pc.
D.
Frame
1 Pc.
G.
Frame
1 Pc.
E.
Back Stretcher
1 Pc.
H.
Front Rail
1 Pc.
I.
Back Panel
1 Pc.
J.
Shelf
4 Pcs.
K.
Drawer
1 Pc.

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
/5
STEP 1
Insert Cam Lock Screws into pre-drilled holes of
Top (A), Top (B), Frame (C), Frame (D), Frame (F)
and Frame (G), then tighten.
(See figure 1)
STEP 2
Attach Shelves (J) to Frame (C) with Head Cap Bolts .
Attach Back Stretcher (E) to Frame (C) with Cam Locks.
(See figure 2)
Attach Frame (D) to unit with Head Cap Bolts and Cam Locks.
A
B
C
D
J
J
E
F
CD
G
Figure 1 Head Cap Bolt
Cam Lock
Figure 2

Assembly Instructions 3/5
STEP 3
Turn the unit to its’ upright position.
Attach Top (A) to the unit with Cam Locks.
STEP 4
Attach Top (B) to the unit with
Head Cap Bolts.
A
Cam Lock
B
Head Cap Bolt
STEP 5
Attach Shelves (J) to Frame (F) with
Head Cap Bolts.
Attach Front Rail (H), Back Panel (I)
to Frame (F) with Cam Locks.
Attach Frame (G) to unit with Head
Cap Bolts and Cam Locks.
F
G
I
H
J
J
Head Cap Bolt
Cam Lock

Assembly Instructions 4
Cam Lock
/5
STEP 6
Attach unit from Step 4 to unit from Step 5 with Cam Locks.
STEP 7
Slide Drawer (K) into position.
K
Figure 3
STEP 8
To level the unit, adjust the adjustable levelers on
the bottom of unit.
(See figure 3)

Assembly Instructions 5
Part List
Drawer (K)
STEP 1
Attach K1, K2 and K3 using a Phillips screwdriver
and long wood screws (8X), tighten halfway.
Attach K3 to K1, K4 using long wood screws (8X),
tighten halfway.
(See figure 1)
STEP 2
Slide K5 into grooves in K2 and K3. Be sure to
push K5 all the way forward so it meets K1.
(See figure 2)
STEP 3
Insert short wood screws (6X) into pre-drilled holes
in K5, tighten screws.
(See figure 3)
STEP 3
Attach Pull Handle with Machine Screws.
(See figure 4)
Tighten all screws used in drawer assembly.
K1.
Front Part
1 pc.
K2.
Side Part
1 pc.
K3.
Side Part
1 pc.
K4.
Back Part
1 pc.
K5.
Base Part
1 pc.
K1
K1
K1
K4
K4
K2
K2
K2
K3
K3
K3
K5
K5
MAKE SURE ROLLER
IS ON THE BACK
Figure 1
Figure 2
Figure 3
Figure 4
Wood Screw (long)
Wood Screw (short)
Machine Screw
/5