Home Styles 88 5050 15 User manual

Hardware List
D.
Side Frame
1 pc.
B.
Stretcher
2 pcs.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Cabinet
1 pc.
88 5050 15
Modern Craftsman
Executive Desk
Part List
F.
Stretcher
1 pc.
Head Cap Bolt
14 pcs. (+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Flat Washer
14 pcs. (+1 extra )
Spring Washer
14 pcs. (+1 extra )
Tools required for assembly : Phillips screwdriver
Wood Screw
10 pcs. (+1 extra)
C.
Side Frame
1 pc.
Tools recommended for assembly :Level
E.
Stretcher
1 pc.
Wood Screw (long)
3 pcs. (+1 extra)
G.
Drawer
1 pc.
Wood Screw
for Drawer
6 pcs. (+1 extra)
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319

Assembly Instructions 2/3
STEP 1
Assemble Stretchers (B), (E) and (F) to
Side Frame (C) and (D)
with Head Cap Bolts,
Spring Washers and
Flat Washers.
(See figure 1)
Figure 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
Head Cap Bolt
Spring Washer
Flat Washer
B
B
C
D
F
E
STEP 3
Place Cabinet (A)
upside down on a soft cloth.
Attach unit onto Cabinet (A)
with Wood Screws
and Wood Screws (long).
Wood Screw
A
STEP 2
Wood Screw (long)
Figure 2
Remove the center drawer by
pushing the plastic lever on its’ left side up,
pushing the plastic lever on its’ right side down and
pulling the drawer open slowly. (see Figure 2)
Remove the outside drawers.

Assembly Instructions 3/3
STEP 5
Turn unit over to its’ upright position.
Slide Drawers into position.
To level the unit, adjust the adjustable levelers on the bottom of unit. (see Figure 3)
Figure 3
Wood Screw for Drawer
G
Attach Drawer (G) to Drawer with Wood Screws for Drawer.
STEP 4