Home Styles 20 05102 0942 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Kitchen Island
20 05102 0942
Carton 20 05102 0941 and 0943 are also needed for assembly.
H.
Rail
2 pcs.
I.
Upright
1 pc.
J.
Back Panel
2 pcs.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Cam Lock Screw
4 pcs. (+1 extra)
Cam Lock
4 pcs. (+2 extra)
F.
Shelf
2 pcs.
G.
Shelf
4 pcs.
E.
Base
1 pc.
M6x35
Head Cap Bolt
12 pcs. (+1 extra)
Adjustable Pin
24 pcs. (+1 extra)
Knob
4 pcs.
M4x25
Machine Screw
4 pcs.
M6x16
Wood Screw
9 pcs. (+1 extra)

Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Insert Cam Lock Screws into
pre-drilled holes in Side Panels (C)
and (D), then tighten.
(See Figure 1)
Cam Lock Screw
C
C
Figure 1
Figure 2
STEP 2
Attach Rail (H) to Side Panel (C) with Cam Lock.
(See Figure 2)
Attach Upright (I) to unit.
Slide Back Panels (J) into position.
Attach Rail (H) to unit with Cam Lock.
Attach Side Panel (D) to unit with Cam Locks.
Cam Lock
H
H
I
J
J
D
D

Assembly Instructions 3/5
STEP 3
Attach Base (E) to unit
with Head Cap Bolts.
(See Figure 3)
E
Figure 3
Head Cap Bolt
STEP 4
Turn unit to its’ upright position.
Insert Adjustable Pins into
side panels at desired level.
Place Shelves (F) and (G)
into position.
F
G
F
G
G
G
Adjustable Pin

Assembly Instructions 4/5
STEP 6
Remove drawers from Top Unit (A).
Place Top Unit (A) and Leaf (B) upside down on a soft cloth.
Attach Leaf (B) to Top Unit (A) with Wood Screws. (See Figure 6)
A
B
Figure 6
Figure 4
STEP 5
Attach Doors (K) and (L) to unit
by sliding door hinges into
side panel hinges.
(See Figure 4)
Attach Knobs to Doors (K)
and (L) with Machine Screws.
(See Figure 5)
Figure 5
Machine Screw Knob
K
L
Wood Screw

Assembly Instructions 5/5
Figure 7
STEP 7
Attach top unit to unit from
Step 5 with Head Cap Bolts.
Level unit by adjusting the
adjustable levelers on bottom
of unit. (See Figure 7)
Note: Unit must be level
to work properly.
Head Cap Bolt
STEP 8
Attach Knobs to drawers with Machine Screws.
Machine Screw
Knob
STEP 9
Slide drawers into position.

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319