Home Styles French Countryside Dining Table User manual

88 5518 30
French Countryside
Dining Table
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
PART LIST
HARDWARE LIST
A.
Table Top
1 pc.
B.
Connector Panel
1 pc.
C.
Post
1 pc.
D.
Leg
4 pcs.
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Key Wrench
1 pc.
Flat
Washer
16 pcs. (+ 1 extra)
Spring
Washer
16 pcs. (+1 extra)
Nut
12 pcs. (+1 extra)
Head Cap Bolt
4 pcs. (+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Tools recommended for assembly :Level

Assembly Instructions
STEP 1
STEP 2
STEP 3
Attach Connect Panel (B) to
Post (C), using Flat Washers,
Spring Washers and Nuts.
Turn the unit upside down on the soft cloth.
Attach Table Leg (D) to the unit, using Flat
Washers, Spring Washers and Nuts.
Place the Base Unit in Step 2 on to Table Top (A)
with Flat Washers, Spring Washers and Head Cap Bolts.
Turn the assembled unit to it’s upright position.
A
IMPORTANT
*You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
C
B
D
D
DD
A
(Figure 1)
To level the unit, adjust the adjustable levelers on
the bottom of unit. (see Figure 1)