Home Styles 88 5002 691 User manual

Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
For assembly see instructions in carton : 88 5002 692
88 5002 691
Buffet
C.
Shelf
4 pcs.
A.
Top
1 pc.
B.
Bottom
1 pc.
D.
Back Panel
2 pcs.

Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Hardware List
Also need Parts in carton : 88 5002 691
Cam Lock Screw
19 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
Cam Lock
19 pcs. (+1 extra)
M3.5x16
Wood Screw
(short)
24 pcs. (+1 extra)
M5x40
Panel Screw
7 pcs. (+1 extra)
Magnet
2pcs.
M3.5x25
Wood Screw
(long)
16 pcs. (+1 extra)
Washer
7 pcs. (+1 extra)
M4x25
Machine Screw
4 pcs. Knob
4 pcs.
M6x30
Head Cap Bolt
4 pcs. (+1 extra)
H.
Front Rail
1 pc.
Hex Wrench
1 pc.
E.
Side Panel
1 pc.
F.
Side Panel
1 pc. G.
Middle Panel
1 pc.
I.
Back Rail
1 pc.
J.
Back Rail
2 pcs.
M.
Front Post
1 pc.
K.
Door
1 pc.
L.
Door
1 pc.
N.
Front Post
1 pc. O.
Drawer
2 pcs.
(Please refer to the last pages of these
instructions for drawer assembly.)
88 5002 692
Buffet
Adjustable Pin
16 pcs. (+1 extra)
M3x13
Wood Screw
for Magnet
4 pcs. (+1 extra)

IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
*After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Assembly Instruction 2 / 6
E
E
STEP 1
Insert Cam Lock Screws into the pre-drilled holes
in Top (A), Side Panels (E), (F), Front Rail (H),
Front Posts (M), and (N). (See Figure 1)
A
A
Cam Lock Screw
Cam Lock Screw
Figure 1
H
H
C
am Lock
S
crew
F
F
Cam Lock Screw
M
M
N
N
Cam Lock Screw

Assembly Instruction 3 / 6
STEP 2
Attach Front Post (M) to Side
Panel (E) and Front Post (N) to
Side Panel (F) with Cam Locks.
(See Figure 2)
STEP 3
Attach Magnets to Middle Panel (G) with Wood
Screws for Magnet (See Figure 3)
Attach Front Rail (H) to Middle Panel (G) using
Cam Lock.
E
E
Magnet
M
M
N
N
G
G
H
H
F
F
Cam Lock
Cam Lock
Figure 2
Figure 3
Wood Screw for
Magnet
Cam Lock

STEP 4
Attach Back Rail (J) to Side Panel unit (F)
with Cam Lock then slide Back Panel (D)
into place.
Attach Back Rail (I) to Side Panel unit (F)
with Cam Lock then slide Back Panel (D)
into place.
Attach Back Rail (J) to Side Panel unit (F)
with Cam Lock.
Assembly Instruction 4 / 6
STEP 6
Attach Bottom (B) to unit with Washers and
Panel Screws.
Washer
I
I
STEP 5
Attach unit to unit from Step 3 with
Cam Lock, Washer and Panel
Screw. (See Figure 4)
Attach Side Panel unit (E) to unit
using Cam Locks.
J
J
J
J
D
D
E
E
B
B
D
D
Panel Screw
Cam Lock
Cam Lock
F
F
Figure 4
Washer
Panel Screw

Wood Screw
(short)
STEP 8
To level the unit, adjust the adjustable
levelers on the bottom of unit. (See Figure 8)
Insert 16X Wood Screws (short) from the back of
the unit. (See Figure 9)
Note: Please make sure unit is level before
tightening these screws.
Assembly Instruction 5 / 6
Figure 5 Figure 7
STEP 7
Place Top (A) onto the unit and
attach with Head Cap Bolts and
Cam Locks. (See Figure 5)
Slide Drawers (O) into position.
Insert Adjustable Pins into side
panels at the desired level.
Place Shelves (C) into position.
Attach Doors (K) and (L) to side
panels by sliding the door lift
hinges into the side panel lift
hinges. (See Figure 6)
Assemble Knobs to Doors (K)
and (L) with Machine Screws.
(See Figure 7)
Figure 8
Figure 9
Head Cap Bolt
K
K
A
A
C
C
C
C
C
C
C
C
O
O
L
L
O
O
Cam Lock
Adjustable Pin
Figure 6

Assembly Instruction 6 / 6
STEP 1
Attach O1 to O3 and O4,
using a Phillips screwdriver and
long wood screws (4X), tighten
halfway.
Attach O2 to O3 and O4 using
long wood screws (4X), tighten
halfway. (See Figure 1)
STEP 3
Insert short wood screws (4X)
into the pre-drilled holes in O5
and tighten. (See Figure 3)
STEP 4
Assemble Pull Handle with machine screws.
(See Figure 4)
Tighten all screws used in drawer assembly.
Figure 3
Part List
Drawer (O)
MAKE SURE ROLLER
IS ON THE BACK
Figure 5
STEP 5
Insert O6 into grooves in O1 and O2.
(See Figure 5)
Figure 2
Figure 1
O5
O5
O1
O1
O6
O6
O3
O3
O3
O3
O4
O4
O1
O1
O2
O2
O2
O2
O5
O5
O1
O1
O4
O4
O3
O3
O2
O2
STEP 2
Slide O5 into the grooves in O3
and O4. Be sure to push O5 all
the way forward so it meets O1.
(See Figure 2)
Figure 4
O4
O4
O6
O6
Figure
5
S
Figure
4
O2.
Back Part
2 pcs.
O1.
Front Part
2 pcs.
O3.
Side Part
2 pcs.
O5.
Base Part
2 pcs.
O4.
Side Part
2 pcs.
O6.
Divider
4 pcs.