HOMEDEPOT ID401-24 User manual

INSTRUCTION
MANUAL
24” Upholsterd Nail Head Bar Stool
SKU: ID401-24

CARE & MAINTENANCE
HARDWARE
PARTS
AB
Page 1 of 4
△
△
14
25
34
M8x60MM
Flat washer
M4.5x45MM
8PCS
Lock washer Allen Key Screws Self-tapping
screw
8PCS 1PC 8PCS 8PCS
Seat
CDE
1PC
Legs No. 1
2PCS
Legs No. 2
2PCS
Longer Footrest
2PCS
Shorter Footrest
2PCS
Clean the dust with a soft cloth
Do not store in extremely wet environment.

PRODUCT ASSEMBLY
1
2
Page 2 of 4
Put chair back on a clean flat surface.
Please note put the legs on correct hole site as shown in the diagram
80%
Align front legs in the seat pad as shown
in the diagram.
Using SCREW (4) with Washer (#1,2) .
DO NOT FULLY TIGHTEN.
First HAND tighten then tightened
using key (3) up-to 60-80% only at
this stage.
1
2
1
12
2
Longer
Longer
Shorter
Shorter
3
4
2
1
A
D
D
E
E
C
BCB
BC
D

PRODUCT ASSEMBLY
3
4
Page 3 of 4
Put chair in the upright position and
SIT ON THE CHAIR to press downwards
on the seat pad ensuring that all 4
feet touch the ground and chair is leveled.
Proceed to tighten all screws making sure
the chair remains level when tightening.
Check that all screws are tight on a regular
basis to ensure chair remains level and
secure.
Also you can using adjustable feet to keep four
legs level .
100%
Using your own screwdriver 100% lock
Self-tapping Screw (5) as shown in the diagram
5

PRODUCT ASSEMBLY
5
6
Page 4 of 4
C
2B
1
C
2
B
1
DE
D
E
A
Please recheck all parts
with correct position
after assemble chair ,
Then close black fabric cover