HOMEDEPOT XWG-143 User manual

XWG-143
INSTRUCTION MANUAL
10 FT x 11 FT Wood Framed Gazebo
The gazebo comes with 4 boxes. Sometimes they may be delivered
on different day, please wait 2-3 more days or contact us for help.

Note: The gazebo needs to be installed in cooperation with five people.
The following tools are not included and needed for assembly:
Pistol Drill Tape Measure Hammer
Screwdriver Ladder 5 people
Warning
1. A 5 person assembly is required for this gazebo.
2. Please take appropriate actions as heavy rain, wind and snow can damage the
gazebo. If necessary please dis-assemble and store for later use.
3. In snowy conditions, please do not allow the thickness of the snow to be more
than 1.97 inch on the roof, this should be cleared as soon as possible for your safety.
When the wind speed resches 61.2km/h, please take measures to avoid the wind.
4. Care the wooden struction of the gazebo like painting with anticorrosive paint every
two months or dry the wooden parts and then paint when it is in rainy season,
can let the gazebo service longer.
1

Attention:
1. Please fix all the screws first,do not lock off,after
assemblling is fully completed, lock all at once finally.
2. Please check the manual carefully and make sure you
have received all the parts.
3. If there is any missing,please let us know the letter of
the parts you need.
4. If there is any damage,please send clear photos to
us,we will check and offer you best solution soon.
Parts List (Box A)
K
Upper Middle
Cross Beam 2 Middle Cross Beam 2 Middle Cross Beam 3 Upper Panel
Flashing 1
Lower Panel Flashing 1 Lower Panel Flashing 2 Side Panel Flashing 1 Side Panel Flashing 2
Middle Cross Beam Top Cap 1 Top Cap 2
Upper Middle
Cross Beam 1
1 PC 1 PC 1 PC
1 PC 1 PC 1 PC
1 PC 1 PC
2 PCS
8 PCS 5 PCS 5 PCS
44 PCS 6 PCS 150 PCS 8 PCS2 PCS
2 PCS
Q
Upper Panel
Flashing 2
L M N P
R S
V W X
TU
H1 H2 H3 H4 H6
Bolt M8*35 Bolt M8*160 Bolt M8*190 Screw ST4.2*25 Screw ST4.2*60
2

8 PCS
68 PCS
8 PCS
8 PCS 8 PCS
8 PCS
1 PC
1 PC 1 PC 1 PC
1 PC
1 PC
2 PCS
2 PCS
2 PCS
2 PCS
2 PCS
4 PCS
4 PCS
4 PCS
4 PCS
4 PCS
2 PCS
8 PCS 8 PCS32 PCS
EFG H I1
I2 J15 16 26
ABB-1 C D
H8 H9 H10 H11 H12
H13 H14 HS HW1
HW3
HW2
Bolt M6*15 Bolt M8*130 Allen Key M8 Wrench M8
Wrench M6
Stak
Screw ST6*35 Screw ST8*80 Flat Washer M6 Flat Washer M8 Hex Nut M8
Parts List (Box B)
Post Cap Post Base Base Cover
Brace1 Brace 2
Cross Beam Cap 1 L-Shape Press Piece 1
L-Shape Press Piece 2 L-Shape Press Piece 3 Screen Cap 2 Beam connecon strap Table Top
Connecon Le
Table Top
Connecon Right Screen Cap 1 Table Top
3

1 PC
1 PC 1 PC 1 PC
1 PC 1 PC
1 PC 1 PC 1 PC 1 PC
2 PCS 2 PCS
1 PC 1 PC 1 PC 1 PC 2 PCS
2 PCS 2 PCS
27 28 29 30 31
32 33 34 35 36
01 02 03 04 05
21 22 23 26
Back Cross Beam 1 Back Cross Beam 2 Middle Beam 2 Middle Beam 1 Long Beam 3
Long Beam 1 Long Beam 4 Long Beam 2
Screen 1 Screen 2 Screen 3 Table Top
Front Cross Beam 2 Front Cross Beam 1
Front upper lePost Front upper right Post Rear post1 Rear post2 Lower end oront Post
Parts List (Box C)
Parts List (Box D)
4

1
01 1x
<1>
02 1x
05 2x
A2x
H14 8x M8x130
8x
H4
8x
ST 4.2x25
H11
M8
STEP1 STEP2
5

<2>
2x
2x
B
B1
28x
H4
ST 4.2x25
STEP1
STEP2
6

<3>
2x
2x
B
B1
38x
H4
ST 4.2x25
1x
04
1x
03
STEP1
STEP2
7

4
27 1x
<4>
28 1x
29 1x
30 1x
4x M8x35
16x
H4
ST 4.2x25
H1
2x
C
STEP2
STEP3
STEP1
8

Attention:
Pls double check the side with
four screws on is upside.
5
D1x
<5>
E1x
4x M8x80
H9
12x
H11
M8
4x
H12
M8
H3 2x M8x190 2x
H2 M8x160
STEP1 STEP2
STEP3
STEP4
9

6
31 1x
<6>
33 1x
32 1x
34 1x
4x M8x35
H1
STEP1 STEP2
10

11
7
<7>
4x M8x80
H9
12x
H11
M8
4x
H12
M8
4x
H2 M8x160
STEP1
STEP2
STEP3 STEP4
1x
1x
31
32
33
34

12
d1=d2
Rt 90
8
15 1x
<8>
16 1x
8x ST6x35
H8
8x
H10
M6
Attention:
Pls make sure that the length of d1 is the
same as d2 then go ahead the next step
to make sure the frame is square. Keep
the beam at right angles to the column,
the column is at right angles to the
ground and keep the beam level.
This action is aimed to make sure that all
screws has been tightened properly.

9
35 2x
<9>
36 2x
12x M8x35
16x
H4
ST 4.2x25
H1
H4x
C2x
STEP1 STEP2
STEP3
STEP4
13

10
<10>
8x M8x35
H1
36
35
2x
STEP1 STEP2
14

15
11
F2x
<11>
8x
H4
ST 4.2x25
STEP2
STEP1

16
12
K1x
<12>
6x
H4
ST 4.2x25
L1x
STEP1
STEP2

17
13
M1x
<13>
8x
H4
ST 4.2x25
N1x
4x
H13
M6X15
STEP1
STEP3
STEP2

14
<14>
V8x
16x
H13
M6X15
18

19
15
<15>
T2x
8x
H4
ST 4.2x25
10x
H13
M6X15
STEP1
STEP2