HoMedics BPW-201 Ver. B User manual

Automatic Wrist
Blood Pressure Monitor
BPW-201
Ver. A
El manual
en español
empieza en la
página 44

3 4
Risk Category Index ...................................... 27
Irregular Heartbeat Detector (IHB) .............. 28
Recalling Values from Memory ..................... 30
Clearing Values from Memory ...................... 32
Important Notes Regarding Your
Blood Pressure Measurement ...................... 33
Care, Maintenance & Cleaning ..................... 34
Potential for Electromagnetic
Interference .................................................... 36
Troubleshooting ............................................. 38
Specifications ................................................ 39
5 Year Limited Warranty ................................ 41
TABLE OF CONTENTS
INTRODUCTORY INFORMATION:
Important Product Notices and
Safety Instructions .......................................... 5
About Blood Pressure ..................................... 7
What is Blood Pressure?
Why Measure Your Blood Pressure?
Blood Pressure Standard ................................ 9
How This Blood Pressure
Monitor Works ................................................ 10
USAGE INFORMATION:
Name/Function of Each Part ......................... 12
Display Explanations ..................................... 13
Installing Batteries ........................................ 15
Date & Time Set Procedure ........................... 17
Applying the Cuff ........................................... 18
Correct Measurement Posture ..................... 20
Measurement Procedure ............................... 22

5 6
IMPORTANT PRODUCT NOTICES AND
SAFETY INSTRUCTIONS
When using your blood pressure monitor, basic
precautions should always be followed. Please
read and follow all instructions and warnings before
using this product. Save these instructions for future
reference.
• Please note that this is a home healthcare product
only and it is not intended to serve as a substitute for
the advice of a physician or medical professional.
• This device uses the oscillometric method to
measure systolic and diastolic blood pressure, as
well as heart rate.
• Do not use this device for diagnosis or treatment
of any health problem or disease. Measurement
results are for reference only. Consult a healthcare
professional for interpretation of blood pressure
measurements. Contact your physician if you have or
suspect any medical problem. Do not change your
medications without the advice of your physician or
healthcare professional.
• This product is not suitable for people with
arrhythmias. This device may have difficulty
determining the proper blood pressure for pregnant
women and for users with irregular heartbeat,
diabetes, poor circulation of blood, kidney problems
or for users who have suffered from a stroke.
• Consult your physician before measuring blood
pressure at the wrist if you have any of the following
conditions: Severe hypertension, severe diabetes,
severe arteriosclerosis, severe kidney disease or
vascular disease that may compromise circulation.
• The pulse display is not suitable for checking the
frequency of heart pacemakers.
• Electromagnetic interference: The device contains
sensitive electronic components. Avoid strong
electrical or electromagnetic fields in the direct vicinity
of the device (e.g. mobile telephones, microwave
ovens). These may lead to temporary impairment of
measurement accuracy.
• Use blood pressure monitor only for its intended use.
• Do not wrap the cuff around body parts other than
your wrist.
• Not for use by or on persons under the age of 18.
• Use only 1.5V AAA alkaline batteries for power
supply.

7 8
Why Measure Your Blood Pressure?
Among today’s various health problems, those
associated with high blood pressure are very common.
High blood pressure dangerously correlates with
cardiovascular diseases. Therefore, blood pressure
monitoring is important for identifying those at risk.
Blood pressure measurements determined with
this device are equivalent to those obtained by
a trained observer using the cuff/stethoscope
auscultatory method, within the limits prescribed by
the American National Standard, Manual, electronic,
or automated sphygmomanometers.
ABOUT BLOOD PRESSURE
What is Blood Pressure?
Blood pressure is the pressure exerted on the artery
walls while blood flows through the arteries. The
pressure measured when the heart contracts and
sends blood out of the heart is systolic (highest)
blood pressure. The pressure measured when the
heart dilates with blood flowing back into the heart
is called diastolic (lowest) blood pressure.

9 10
BLOOD PRESSURE STANDARD
The table below contains defined levels for hypertension
that are publicly available from the National Heart Lung
and Blood Institute at the U.S. National Institutes of Health
(NIH)
(http://www.nhlbi.nih.gov/health/dci/Diseases/Hbp/HBP_
WhatIs.html). Users can compare their own blood pressure
readings against these defined levels to determine if they
may be potentially at increased risk.
This table is applicable to most adults aged 18 and older.
Blood pressure tends to go up and down, even in people
who normally don’t have high readings. If your numbers
stay above the “normal” range most of the time, you may
be at increased risk and should consult your physician.
Although one can easily find where their own blood
pressure readings fall on this table, this monitor comes
equipped with a Risk Category Index that automatically
compares each reading to the defined levels and
provides a helpful cue if your reading falls into one of the
stages that could potentially indicate increased risk. See
page 27 for more information on this feature.
Please note that cues provided by this monitor are only
intended to assist you in using this table. The table and
cues are only provided for convenience to help you
understand your non-invasive blood pressure reading as
it relates to the NIH information. They are not a substitute
for a medical examination by your physician. It is
important for you to consult with your physician regularly.
Your physician will tell you your normal blood pressure
range as well as the point at which you may actually be
considered to be at risk.
HOW THIS BLOOD PRESSURE
MONITOR WORKS
This monitor uses Smart Measure™ technology to detect
your systolic pressure, diastolic pressure and pulse. Smart
Measure™ technology enables the monitor to automatically
inflate and deflate at the appropriate level for each
Category Systolic (mmHg) Diastolic (mmHg)
Normal Less than 120 and Less than 80
Prehypertension 120-139 or 80-89
High Blood Pressure
Stage 1 140-159 or 90-99
Stage 2 160 or higher or 100 or higher

11 12
NAME/FUNCTION OF EACH PART
Accessories for unit :
2 “AAA” size, 1.5V alkaline
batteries included in the
carrying case with the unit.
individual. With one touch of a button, the cuff will
automatically inflate to block the blood flow through
your artery. Next, the deflation process starts. When
measurement is complete, the monitor will display
your systolic pressure, diastolic pressure, and pulse
readings. Please note that any muscle movement
during inflation or deflation will cause measurement
error.
The monitor automatically finds where your
measurement results fall on the NIH’s National Heart
Lung and Blood Institute’s table and provides a cue
if your reading falls into one of the stages that could
potentially indicate increased risk. Please refer to
page 27 for more information on this feature.
The appearance of the icon indicates that a
pulse irregularity consistent with an irregular heartbeat
was detected during measurement. Refer to page
28 for more information on the Irregular Heartbeat
Detector.
Memory Recall
Button
User-Select
Button
Wrist Cuff
Battery
Cover
START/STOP
Button
Date/Time
Set Buttons
LCD Display

13 14
AVG. 3 A
VG. 3
AVG. 3
AVG. 3
DISPLAY EXPLANATIONS
Systolic
Pressure
Diastolic
Pressure
Date/Time Indicator
Display Symbols:
Heart Rate
User 1: Appears when the monitor is operated by
User 1
User 2: Appears when the monitor is operated by
User 2
Weak Battery Symbol: Appears when batteries
should be replaced
Pulse Symbol: Shows the heart rate per minute
Irregular Heartbeat Detector: Refer to page 28 for
more information.
Memory Average: Displays average of last 3
readings
Risk Category Index: See page 27 for more
information
Measurement Error: Measure again. Wrap
the cuff correctly and keep wrist steady during
measurement.
Air Circuit Abnormality: Measure again.
Pressure Exceeding 300 mmHg: Switch the unit
off to clear, then measure again.
Error Determining Measurement Data: Measure
again.
System Error: Measure again.
If and any of the following letters and numbers
appear in the area that systolic pressure should be
displayed, an error has occurred with your reading.
See Troubleshooting section of this manual for more
information.
/
/
START
STOP
M
MSTART
STOP
(No Symbol)

15 16
Replace the batteries if:
1. The weak battery symbol appears on the display.
2. Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may
be discharged earlier than batteries you buy in stores.
Replace all batteries at one time (as simultaneous set).
Use only 1.5V AAA alkaline batteries. Remove batteries
when unit is not in use for extended periods of time.
Date and time will need to be reset if batteries are
removed or replaced. Clean contacts on battery and
in battery compartment with a soft dry cloth each time
you install batteries.
Note: Batteries are hazardous waste. Do not dispose
of them together with the household garbage.
INSTALLING BATTERIES
1. The battery cover is located
along the side of the monitor.
Remove battery cover by
pressing down and pulling
away from the monitor.
2. Install batteries according to
the polarity indications inside
the compartment (as shown
in figure 2). Battery Type: 2
Alkaline LR03 (AAA) size
3. Insert the other battery,
according to the polarity
indications inside the
compartment (as shown in
figure 3).
4. Replace the cover by inserting
it back into place.
1.
3.
4.
2.

17 18
APPLYING THE CUFF
1. Remove all watches, wrist jewelry, etc. prior to
attaching the wrist monitor. Clothing sleeves
should be rolled up and the cuff should
be wrapped around bare skin for correct
measurements.
2. Apply cuff to left wrist with
palm facing up as shown in
Fig. A.
3. Make sure the edge of the
cuff is about 1/4”~1/2” (1 cm)
from the palm as shown in
Fig. B.
DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the Set button
located on the top of the monitor.
2. The display will show a blinking number showing
the HOUR. Change the HOUR by pressing the
button. Each press will increase the number
by one in a cycling manner. Press the Set button
again to confirm the entry, and the screen
will show a blinking number representing the
MINUTE.
3. Change the MINUTE, MONTH, DAY and YEAR as
described in Step 2 above, using the button
to change the numbers and the Set button
to confirm the entries.
Press the button
blinking HOUR
increasing HOUR
confirm the entry
repeat process to set MINUTE,
MONTH, DAY and YEAR
AVG. 3 AVG. 3
AVG. 3
AVG. 3
Fig. A
Fig. B

19 20
CORRECT MEASUREMENT POSTURE
1. Place your elbow on a table
so that the cuff is at the same
level as your heart as shown in
Fig. A. Relax your entire body,
especially between your elbow
and fingers.
Note: Your heart is located
slightly below your armpit.
2. If the cuff is not at the same
level as your heart or if
you cannot keep your arm
completely still throughout the
reading, use a soft object such
as a folded towel to support
your arm as shown in Fig. B.
4. In order to insure accurate
measurements, fasten the
hook and loop strap securely
around your wrist so there is
no extra space between the
cuff and the wrist as shown
in Fig. C. If the cuff is not
wrapped tight enough, the
measurement values will not
be accurate.
5. If your physician has
diagnosed you with poor
circulation in your left arm,
place the cuff around your
right wrist as shown in Fig. D.
Fig. C
Fig. D
Fig. A
Fig. B

21 22
3. Turn your palm upwards.
4. Sit upright in a chair, and take
5-6 deep breaths.
Note: Avoid leaning back
while the measurement
is being taken as
shown in Fig. C.
MEASUREMENT PROCEDURE
Important Notes:
• Position the monitor at the same level as your
heart during measurement to ensure accurate
readings.
• Blood pressure changes with every heartbeat and
is in constant fluctuation throughout the day.
• Blood pressure measurement can be affected
by the position of the user, his or her physiologic
condition and other factors. For greatest
accuracy, wait 1 hour after exercising, bathing,
eating, drinking beverages with alcohol or
caffeine, or smoking to measure blood pressure.
• Before a measurement, it is suggested that
you sit quietly for 15 minutes as measurements
taken during a relaxed state will have greater
accuracy. You should not be physically tired or
exhausted while taking a measurement.
Fig. C
(X)

23 24
• During the measurement, do not talk or move your
arm or hand muscles.
• See page 33 for additional notes regarding your
blood pressure measurement.
1. Press the User Select button to choose User 1 or
User 2.
If you are using this blood pressure monitor for the first
time, please remove the protective film from the screen.
/
/
START
STOP
M
MSTART
STOP
AVG. 3 AVG. 3
AVG. 3
AVG. 3 AVG. 3
AVG. 3
OR
2. With the cuff wrapped around your wrist, press the
START/STOP button. Do not inflate the cuff unless
it is wrapped around your wrist. All digits will light
up, checking the display functions. The checking
procedure will be completed after about 3 seconds.
3. After all symbols disappear, the display will show “00”.
The monitor is “Ready to Measure” and will
automatically inflate the cuff to begin measurement.
The cuff will then begin deflating as measurement
continues.
AVG. 3 A
VG. 3
AVG. 3
AVG. 3
AVG. 3 AVG. 3
AVG. 3
AVG. 3
/
/
START
STOP
M
M
START
STOP

25 26
Note: The monitor will re-inflate automatically if
the system detects that your body requires
more pressure for measurement.
4. When the measurement is completed, the cuff
will deflate entirely and systolic pressure, diastolic
pressure and pulse will be shown simultaneously
on the LCD screen. The measurement is then
automatically stored into memory.
Note:
1. This monitor automatically turns off approximately
1 minute after last operation. You may also press
the START/STOP button to turn the unit off.
2. To interrupt the measurement, you may press
the START/STOP button (recommended),
“M”, User-Select or Date/Time Set (
/
/ )
buttons. The cuff will deflate immediately after a
button is pressed.

27 28
(No Symbol)
RISK CATEGORY INDEX
This monitor comes equipped with a Risk Category
Index that automatically compares each reading
to defined levels established by the U.S. National
Institutes of Health’s (NIH) National Heart Lung and
Blood Institute as described earlier in this manual,
and provides a helpful cue if your reading falls into
one of the stages that could potentially indicate
increased risk. No cue is given if the reading falls
in the normal range as defined by NIH. Please
note that cues provided by this monitor are only
intended to assist you in using this table. The table
and cues are only provided for convenience to help
you understand your non-invasive blood pressure
reading as it relates to the NIH information. They are
not a substitute for a medical examination by your
physician. It is important for you to consult with your
physician regularly. Your physician will tell you your
normal blood pressure range as well as the point at
which you may actually be considered to be at risk.
IRREGULAR HEARTBEAT DETECTOR (IHB)
The appearance of the icon indicates that
a pulse irregularity consistent with an irregular
heartbeat was detected during measurement. Usually
this is not a cause for concern. However, if the symbol
appears often, we recommend you seek medical
advice. Please note that the device does not replace
a cardiac examination, but serves to detect pulse
irregularities at an early stage.
Movement, shaking or talking during the
measurement can result in pulse irregularities that
may cause the appearance of this icon. Therefore,
it is of great importance to not move or talk during
measurement.
AVG. 3 AVG. 3
AVG. 3
AVG. 3
Irregular
Heartbeat
Detector

29 30
RECALLING VALUES FROM MEMORY
This monitor can be used by two individuals. Each user
can store up to 60 measurements.
1. Press the User-Select button.
2. Choose User 1 or User 2
3. Press the “M” button to access the memory.
/
/
START
STOP
M
MSTART
STOP
/
/
START
STOP
M
M
START
STOP
/
/
START
STOP
M
MSTART
STOP
/
/
START
STOP
M
MSTART
STOP
IRREGULAR HEARTBEAT DETECTOR (IHB),
CONTINUED
To determine the presence of an irregular heartbeat,
the average of the heartbeat intervals is calculated
with the first 3 normal effective heartbeat values. It
is important to note that the average is not a strict
mathematical averaging of all recorded intervals. At
least 3 beats with 25% or greater difference from the
average heartbeat interval will generate the icon
on the screen.
IMPORTANT INFORMATION:
This blood pressure monitor is not designed for use
by people with arrhythmias nor for diagnosing or
treating an arrhythmia problem. As a safeguard, we
recommend that if you have arrhythmias such as atrial
or ventricular premature beats and atrial fibrillation
or any other special conditions you should check
with your physician before using your blood pressure
monitor.

31 32
CLEARING VALUES FROM MEMORY
1. Press the User-Select button to select User 1 or
User 2.
2. Press and hold the and buttons at the same
time while in memory recall mode and the data for
the selected user will be erased automatically.
4. The monitor will first display the calculated average
applied to the last 3 memories (“AVG. 3”).
5. Every new press of the “M” button will recall
a previous reading. The latest reading will be
recalled first.
/
/
START
STOP
M
MSTART
STOP
AVG. 3 AVG. 3
AVG. 3
AVG. 3
and

33 34
IMPORTANT NOTES REGARDING YOUR
BLOOD PRESSURE MEASUREMENT
• Take your reading in a comfortable environment
as measurements can be affected by hot or cold
temperatures. Take your blood pressure at normal body
temperature.
• Do not move or talk during measurement as this can
elevate readings.
• Do not move or cross legs during measurement. Keep
feet flat on floor.
• Do not touch cuff or monitor during measurement
procedure.
• It is suggested that you take your measurements at
the same time each day and use the same wrist for
consistency.
• Users should wait a minimum of 5 minutes before
taking additional measurements. More time may be
necessary depending upon your physiology.
• The measurement results that users receive are for
reference only. If users have any blood pressure
concerns, please consult a physician.
• Once inflation reaches 300 mmHg, the unit will
deflate automatically for safety reasons.
• This product is not suitable for people with
arrhythmias.
• This device may have difficulty determining the
proper blood pressure for pregnant women and
for users with irregular heartbeat, diabetes, poor
circulation of blood, kidney problems, or for users
who have suffered a stroke.
CARE, MAINTENANCE & CLEANING
1. Clean the blood pressure monitor body and cuff
carefully with a slightly damp, soft cloth. Do not press.
Do not wash cuff or use chemical cleaner on it. Never
use thinner, alcohol or petrol (gasoline) as cleaner.
2. Leaky batteries can damage the unit. Remove the
batteries when the unit will not be used for a long time.
3. Follow local ordinances and recycling instructions
regarding disposal or recycling of the device and
device components, including batteries.
4. If the unit is stored near freezing, allow it to acclimate
to room temperature before use.
5. This blood pressure monitor is not field serviceable.
You should not use any tool to open the device nor
should you attempt to adjust anything inside the
device. If you have any problems with this device,
please contact HoMedics Consumer Relations (contact
information on warranty page).

35 36
POTENTIAL FOR ELECTROMAGNETIC
INTERFERENCE
To avoid inaccurate results caused by
electromagnetic interference between
electrical and electronic equipment, do
not use the device near a cell phone or
microwave oven.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
6. Do not immerse the unit in water as this will result in
damage to the unit.
7. Do not subject the monitor and cuff to extreme
temperatures, humidity, moisture, and direct sunlight.
Protect from dust.
8. Do not fold the cuff tightly.
9. Do not disassemble the monitor or cuff. If in need of
repair, refer to the warranty section of this manual.
10. Do not subject the monitor to extreme shocks (do not
drop on floor).
11. Do not inflate the cuff unless wrapped around wrist.
12. Do not wrap the cuff around body parts other than
your wrist.
13. Do not drop or insert any object into any opening.
14. This monitor may not meet its performance
specifications if stored or used outside of these
temperature and humidity ranges:
• Storage/Transportation
Environment
Temperature:
-4°F~158°F
(-20°C~70°C)
Humidity:
Less than 90% RH
• Operation Environment
Temperature:
50°F~104°F
(10°C ~40°C)
Humidity:
15 ~ 90% RH

37 38
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Note: If the unit still does not work, contact HoMedics Consumer Relations.
Under no circumstance should you disassemble or attempt to repair the
unit by yourself. Contact information for HoMedics Consumer Relations
Department can be found on the warranty page (See page 41).
SYMPTOMS POSSIBLE
CAUSES CORRECTION
Unit does not turn
on when the START/
STOP button is
pushed.
Batteries have
run down.
Replace them
with two new AAA
alkaline batteries.
Battery polarities have
been positioned incor-
rectly.
Re-insert the
batteries in the
correct positions.
EE measurement
error symbol shown
on display or the
blood pressure value
is displayed exces-
sively low
(or high).
Cuff has been placed
incorrectly.
Wrap the cuff properly
so that it is positioned
correctly.
Did you talk or move
during measurement?
Measure again. Keep
wrist steady during
measurement.
Shaking of the wrist
with the cuff on.
E1 error symbol
shown on display
Air circuit
abnormality.
Measure again.
E2 error symbol
shown on display
Inflation pressure exceed-
ing 300 mmHg.
Switch the unit off,
then measure again.
E3 error symbol
shown on display
Error determining
measurement data.
Measure again.
EP error symbol
shown on display
System error. Measure again.
TROUBLESHOOTING
If any abnormality arises during use, please check the following points:

39 40
Power Source: Two 1.5V DC (AAA) Alkaline batteries
Measurement
Method: Oscillometric
Measurement
Range:
Pressure: 40~280 millimeters Mercury (mmHg)
Pulse: 40~199 beats/minute
Accuracy: Pressure: ±3 mmHg
Pulse: ±5% of reading
Pressure Sensor: Semi-conductor
Inflation: Pump driven
Deflation: Automatic Pressure release valve
Memory Capacity: 60 memories for each User (120 total)
Auto-shut-off: 1 minute after last button operation
Operation
Environment:
Temperature: 50°F~104°F (10°C~40°C)
Humidity: 15% ~ 90% RH
Storage/
Transportation
Environment:
Temperature: -4°F~158°F (-20°C~70°C)
Humidity: Less than 90% RH
SPECIFICATIONS
Weight: 0.30 lbs (136.1 g) (without batteries)
Wrist
Circumference: 5.3” - 7.7” (13.5cm - 19.5cm)
Accessories: Two AAA alkaline batteries, instruction
manual, hard plastic storage case
Dimensions: 2.6”(L) x 1.3”(W) x 3.1”(H)
67mm(L) x 32mm(W) x 79mm(H)
Internally Powered equipment
Type BF Equipment
IPx0-No special protection against the
ingress of water.
Not suitable for use in presence of
flammable anesthetic mixture with air,
oxygen or nitrous oxide. Continuous
operation with short-time loading.
SPECIFICATIONS (continued)
Note: These specifications are subject to change without notice.