HoneyGuaridan A303D User manual

Automatic Pet Feeder
User Manual
Model：A303D/A305D
Before using this product, please read this manual
carefully and keep it for future reference.

Contents
SAFETY PRECAUTIONS - 1
WARRANTY-3
IN THE BOX-3
PRODUCT DIAGRAM-4
BUTTONS AND DISPLAY OVERVIEW - 5
HOW TO USE-6
ASSEMBLY AND PREPARE FOR SETTING - 6
PROGRAM SETTING - 9
CLEAN AND CARE - 14
TROUBLESHOOTING - 16

! WARNING
1
SAFETY PRECAUTIONS
Dispose of all packaging materials properly. Some items
may be packed in polybags；these bags could cause
suffocation；keep away from children and pets.
To reduce the risk of injury, please keep close
supervision when an appliance is used near children.
Do NOT immerse the base part in water at anytime as it
may damage electronic components like the control
panel.
Do NOT use outdoors. Check operation frequently to be
sure the unit is dispensing properly.
Do NOT use wet, canned or moist food.
Only use attachments recommended or sold by the
manufacturer. The use of attachments not recommended
or sold by the manufacturer may cause an unsafe
condition. Do not modify the pet feeder.
Always unplug when not in use and before cleaning.
Examine the feeder after installation. Do not plug in if
there is water on the power cord or plug.
To avoid tripping, always position power cord out of the
way of foot traffic.

CAUTION
2
Do NOT allow pets to chew on or swallow any parts. If
you are concerned about the power cord, purchase a cord
conduit (a hard plastic protector) at any hardware store to
protect the power cord.
Do NOT install or store the pet feeder where it will be
exposed to weather or temperatures below 4°C / 39°F.
Use alkaline D batteries to power.
Check the batteries regularly. Before Leaving for
extended time, always replace batteries with new ones.
Suitable for dry food ONLY, with kibble size ranging from
2-15mm / 0.07-0.6in in diameter. Larger kibble may get
stuck at the food outlet.
Read and observe all important notices listed on the pet
feeder and in the packaging.

3
WARRANTY
IN THE BOX
• 1 Year Warranty
• Lifetime Support
For guidance on product use and warranty extension,
please contact our brand after-sales staff via email：
ser[email protected]
If any questions related to orders, please contact the
seller through the shopping platform.
1×Automatic Pet Feeder
1×Desiccant1×Power Adapter 1×User Manual
2×Bowl Holders
Automatic Pet Feeder
UserManual
Model：A303D/A305D
Beforeusing this product, please read this manual
carefullyand keep it for future reference.
2 x Slow Feeder
Bowls
2 x Stainless Steel
Bowls
or

PRODUCT DIAGRAM
Front View
Bottom View
4
1) Desiccant Box
2) Lid
3) Lid Lock Button
4) Food Tank Buckle
5) Base
6) Food Outlet
7) Bowl Holder
8 ) Control Panel
9 ) LCD
10) Food Tank
11) Battery Cover
12) Speaker
13) Power Socket
1
2
3
4
6
5
7
10
13 12
11
89

5
BUTTONS AND DISPLAY OVERVIEW
•Long Press and hold the button for 3s to turn on/off the feeder.
•Press for choosing the meal number (1-6 meals).
Dispense one portion food in each bowl by pressing this
button.
Program the meals portion size ( 0-24 portions).
Portion Button:
Manual Feeding Button:
Program the hour time.
Hour Button:
Program the minute time.
Minute Button:
Press this button to enter the time setting and save time
when you finish the time setting.
Time Button:
Record the voice, play the voice or delete the voice
recording function.
Recording Button:
Meal Button:
MEAL
12H 60M
MEAL
12H
60M

6
HOW TO USE
ASSEMBLY AND PREPARE FOR SETTING
Warning： Please use the original 5V power supply.
1. Press the lid release button to take
out the Accessories from the food
tank.
2. Put the desiccant into the box under
the Lid.
Notes：
• To prevent mold growth, it is
recommended to change the desiccant
every 15 days.
• Remove the desiccant bag before
cleaning the lid.
3. Install the holder bowl.
Attach the bowl to the designated
notches underneath the feeder base.
Note： Before moving the feeder, press
the holder bowl down to remove it from
the feeder base. If there is grain in the
food bowl, handle it gently to avoid
spilling. Hold the base instead of any
other parts when lifting the feeder.
AutomaticPet Feeder
UserManual
Model：A303D/A305D
Beforeusing this product, please read this manual
carefullyand keep it for future reference.

7
4. Add dry pet food to the food tank.
5. Put the lid back on.
Press down to make sure it snaps into
place.
Notes：
• Do NOT use canned, wet or moist pet
food.
• Recommend kibble size ranging from
2-15mm / 0.07-0.6in in diameter.

8
• Plug the power cable into the power jack under the
feeder and the 5V power adapter into a power socket.
• Open the battery cover at the bottom of the unit, and
install three D alkaline batteries (not included) in case of
power outage.
• The LCD will light up automatically indicating the feeder
is on now.
Notes：
1) Batteries are NOT included.
2) Before connecting power, make sure all parts are clean
and dry.
3) The battery should power with an output of 5V； the
battery level icon on the display flashs on a Low battery
level.
6. Connect power
The feeder supports dual power modes.

9
MEAL
12H 60M
MEAL
12H 60M
PROGRAM SETTING
1. Set the Current Time
1) Press and hold the Time setting button for 3s, The
hour and minute digit flash.
2)Press Hour button to adjust hour, press one time
the hour add 1, press Minute button to adjust the
minute, press one time the minute add 1. Long press to
adjust quickly.
3)Press and hold Time setting button for 3s to save
the current time and exit the time setting.
12H
60M
MEAL
12H 60M
MEAL
12H 60M

2. Set the Feeding Time& Portions of Meals
1)Set the first meal feeding time
After the current time setting. Press the Meal button
to enter feeding plan setting, the meal 1, time and
feeding portions volume flash, press Hour button 、
Minute button to adjust the first meal feeding time.
MEAL
12H
60M
Note: You can change the 12/24 hour format by pressing
the Hour button and Minute button together for
3s. When the 12H format is selected, the AM/PM icon will
appear on the screen.
12H 60M
MEAL
12H 60M
MEAL
12H 60M
MEAL
12H 60M
MEAL
12H 60M
MEAL
12H 60M
10

11
2)Set the portions of the first meal
Press Portion button to adjust the meal 1 portions.
Press one time the portion add 1.
Note: Up to 24 Portions for each meal.
3) After you finish the meal 1 setting, you can press the
Meal button to select meal 2. Repeat the steps
above to set the other meals if you need. The feeder
supports up to 6 meals per day. The portion number set 0
of which meal means it will not dispense at this meal.
MEAL
MEAL
12H 60M
MEAL
12H 60M
MEAL
12H 60M
MEAL
12H 60M

12
3.Clear all settings
• Press and hold both the
Manual feeding button
and Time button for 3s
to factory reset.
• 1 Portion=15ml=0.06cup=6g (The weight may change
with the different kibbles)
Note: Each bowl dispenses 1 portion food.
MEAL
12H 60M
*Reference for portion setting:
Model Each bowl
A303D/
A305D
15ml
1/2 Cup
2
3
4
2
3
4
2
3
4
2
3
4
2
3
3
3
3
4
4
4
4
4 4
2 3 3
2 2 2 2
2 3
2 2 1
1 1 1 2
5 5
3 3 4
2 2 3 3
6 6
4 4 4
3 3 3 3
8 8
5 5 6
8 9 9
7 7 7
8 8 8
4 4 4 4
6 6 6 8
5 5 5 6
6 6 6 6
1/3 Cup
2/3 Cup
3/4 Cup
1 Cup
Cup
1
Cup
113
Cup
1
Meals per Day Portion per
Meal
Per
Portion
RESET
23
12

13
5.Manually feed your pet
• Press and hold the Manual feeding button for 3s,
the feeder dispenses one portion food in each bowl.
4.Recording setup
• Press and keep holding the Recording button ，the
recording indicator light up then you can record for Max
10s sound. If you stop pressing the button when record-
ing, the system will recognize you finish the recording.
After finishing the recording, you can press Recording
button one time to play your recording.
• If you want to delete the recording, you can press
Recording button two times quickly, the recording
indicator light flash 3 times, then the recording message
delete.
MEAL
12H 60M
MEAL
12H 60M

14
MEAL
12H 60M
CLEAN AND CARE
• It's recommended to clean the feeder regularly for the
health of your pet.
• The washable parts are as follows：lid, food tank, bowl,
bowl holder
Clean the lid, food tank, food tray
1. Disconnect power and
take out the batteries
before cleaning.
2. Remove the lid and take
out the desiccant in the box
under the Lid.
6.Low battery reminder
• When the batteries are low, the on the LCD screen
will turn on. After new batteries are installed, the on
the LCD screen will be turned off.

15
3. To remove the holder
bowl, press down the bowl
with holder.
5. Rinse and air dry the lid,
food tank, food tray
thoroughly before refitting
them to the machine.
4. To remove the food tank,
use your thumbs to press
the buckles on both sides
while pushing upwards at
the same time.
6. When install the food
tank , please check direc-
tion arrows on the bottom
rubber rotor, must keep the
arrows on the both side is
aligned.

16
TROUBLESHOOTING
Problems
How to delete the
voice recording.
No display on the
screen.
Kibbles don't come
out.
Why no ant proof?
Solutions
1) Check whether the power adapter is
connected to the socket. If properly
connected but the problem still exists,
you can install three batteries to see if the
problem is solved.
2) If your feeder is only powered by
batteries, make sure the batteries have
enough power;
3) If the above solutions don't work,
please contact our support team via
email.
1) Suitable kibble size： 2-15mm /
0.07-0.6in), bigger kibbles could get stuck
and jam the feeder.
2) Do not add moist or wet food.
3) Empty and remove the food tank,
check the chute and food outlet, and
remove blockages.
The soft rubber rotor and rubber strip
must plug the gaps of the outlet to keep
air, water, and ants from entering the
tank.
press two times quickly until the
recording indicator light blinking 3 times,
then the recording message delete.

SPECIFICATIONS
Model
Food Tank Capacity
A303D
3.5 L
Power Adapter AC110-240V input, DC 5V output
Working Current Izmax 0.8A
Operating Temperature -30°C-50°C/-22°F-122°F
External Socket Type-C power socket
Net Weight 1.8kg/4lbs
Dimensions 28.5 x 18.8 x 17.2cm /11.2 x 7.4 x 6.8in
Power DC 5V power adapter； 3 x alkaline D
batteries(not included)
Model
Food Tank Capacity
A305D
5 L
Power Adapter AC110-240V input, DC 5V output
Working Current Izmax 0.8A
Operating Temperature -30°C-50°C/-22°F-122°F
External Socket Type-C power socket
Net Weight 1.9kg/4.2lbs
Dimensions 34.6 x 18.8 x 17.2cm /13.6 x 7.4 x 6.8in
Power DC 5V power adapter； 3 x alkaline D
batteries(not included)

HoneyGuardian Automatic Pet Feeder
Model: A303D/A305D
Web：www.honeyguardian.com
Designet by honeyguardian Made in China
HoneyGuardian All Rights Reserved.