HoneyGuaridan A68 User manual

A68 Automatic Pet Feeder
User Manual

Battery
cover
Feeder base
Hopper release
button
Power
interface
Feeder lid
Control panel
Stainless steel bowl
01
Hopper
Single Bowl Version:
1 x Pet Feeder, 1 x Stainless Steel Bowl, 1 x Bowl
Holder, 1 x Power Adapter, 1 x Desiccant Bag, 1 x User
Manual
Dual Bowls Version:
1 x Pet Feeder, 2 x Stainless Steel Bowls, 2 x Bowl Holders,
1 x Power Adapter, 1 x Desiccant Bag, 1 x 2-way Splitter, 1
x User Manual
Structural image

Control panel:
Setting Instructions
Meals Switch Button (1-6 meals)
Press and hold the button for 3 seconds to turn
off/on
Meals Portion Volume Button: Program the meals
portion size ( 0- 48 portions)
02
MEAL
MEAL
12H 60M
To prevent the mold growth, it is recommended to
change the desiccant bag every 15 days
The feeder is for indoor household use only.
The host of the equipment is not washable.
The hopper and the food tray and stainless steel
bowl can be removed and washable.
Please keep pets from biting the power cable
or it may cause leakage.
Please place the feeder horizontally and close
the lid to keep the food from spilling out.
Notice:
Manual Feeding Button: Dispense one portion
by pressing this button 1 time.

12H
60M
03
12/24
MEAL
12H 60M
Hours Setting Button: Set the hours time.
Minutes Setting Button: Set the minutes time.
Time Setting Button: Press this button to enter
the time setting and save time when you finished
the time setting.
Recording Button: Record the voice, play the voice
or delete the voice recording function.
Time Setting
Press “ ” and hold for three seconds to unlock the
screen and enter the time setting mode, The hour and
minute” ”blinks. Press“ ”、” “to set hours
and minutes time as your demand. Press“ ”and hold
the button for 3 seconds to exit the time setting.
You can switch the 12-hour clock and 24-hour clock by
pressing the “ ” and “ ”at the same time.
12H
12H
60M
60M

04
Feeding
Time
Feeding
Meals Plan
Feeding Portions
Volume
Feeding Setting
You can set 0-6 meals per day and MAX 48 portions
volume for each meal.
One portion size is about 5-6g (16 ml) food kibble. The
dual bowls version dispense one portion in each bowl is
about 2.5g.
Recommended food size: 0.2-1.2cm(0.07-0.47inch)
diameter. Please use food smaller than 1.2cm, otherwise
the feeder may get stuck.
Meal 1:
Pressing “ ” one time
to enter the feeding plan
mode, at this time the meal
1, feeding time and feeding
portions volume will blink,
press :” ” and “
” to set the feeding time,
then press “ ” to set
the meal portions.
12H
60M
MEAL

You can use same method to program 3, 4, 5, 6 feeding
plans. If you do not need to program the others feeding
plan or delete the previous feeding plan, you can set the
feeding portions volume.
05
Feeding
Time
Feeding
Meals Plan
Feeding Portions
Volume
Feeding Meals Plan
Feeding Portions Volume
Meal 2:
After you finished the meal
1 setting, you can also press
the “ ”one time to
choose meal 2. The meal
feeding time and feeding
portions volume will
blink,press :” ”and
“ ”to set the feeding
time, then press ” ” to
set the meal portions.
12H
60M
MEAL

06
Recording indicator
MEAL
12H 60M
Recording Setting
Press “ ” and hold for three seconds then you can
record for Max 10 seconds after the recording indicator
lighting up. If you release your hand when recording, the
system will recognize you finished the recording.
After finishing the recording, you can press “ ” one
time to play your recording. You can press“ ” two
times until the recording indicator light blinking 3 times,
then the recording message is removed.

07
MEAL
12H 60M
Reset
Low Battery Reminder
When the batteries are low, the “ ” on the LCD
screen will turn on. After new batteries are installed, the
“ ” on the LCD screen will be off.(Battery model:
4×D size alkaline battery）
Reset Function
You can press both the “ ” and “ ” for three
seconds to factory reset.
Manual Feeding
Press “ ” and hold for three seconds, the food will
dispense one portion each time.

08
Single bowl installation
Please assemble the base of the food bowl with the host
(as shown)

09
Buckle A
Buckle B
Buckle
hole A
Buckle
hole B
Dual bowls installation
(If you purchased the dual bowls version）
Step 1: Please install the two way splitter into the host.
(as shown)

10
Step 3: Please put the host in place. (as shown)
Step 2: Please assemble the two bowl bases with the
connector plate.

11
Distributor removal
Please hold the two way splitter with both hands and
press down with the thumb, then it can be removed
(as shown)