HoneyGuaridan S36 User manual

S36
Smart Pet Feeder
User Manual

Packing List:
Battery
cover
Feeder
base
WIFI Indicator
light
Hopper release
button
Power
interface
Food
viewport
Feeder lid
Control panel
Stainless steel bowl
01
Single Bowl Version:
1 x Pet Feeder, 1 x Stainless Steel Bowl, 1 x Bowl Holder, 1 x Power
Adapter, 1 x Desiccant Bag, 1 x User Manual
1 x Pet Feeder, 2 x Stainless Steel Bowls, 2 x Bowl Holders, 1 x Power
Adapter, 1 x Desiccant Bag, 1 x 2-way Splitter, 1 x User Manual
Dual Bowls Version:
Notice
1. The feeder is for indoor household use only.
2. The host of the equipment is not washable. The food hopper, the
bowl holder and stainless steel bowl can be removed for washing.
3. Please place the feeder horizontally and close the lid to keep
the food from spilling out when pets knocked over.
Product Diagram

02
Dual Power Supply
① Plug the power cord into the feeder.
② Install 4 D-size alkaline batteries as back up battery.
(Batteries are not included)
*If powered by battery only. The device can work for 3 months.
*We recommend using both the power adapter and batteries at
the same time in case of a power outage. When the external
power is cut off, the device will change to battery powered.
Note: The WiFi function only work on plug-in power. For
energy saving, the WiFi is unconnectable and all operations on
the app will be unavailable if powered by batteries only.

03
Single Bowl Installation
Please assemble the base of the food bowl with the host .

Step 1: Please install the two way splitter into the host.
Buckle A
Buckle B
Buckle
hole A
Buckle
hole B
04
Dual Bowls Installation
(If you purchased the dual bowls version.）

Step 3: Please put the host in place.
05
Step 2: Please assemble the two bowl bases with the
connector plate.

06
1. Dispense each portion size is about 5-6g(16ml) food
kibble;
The dual bowls version dispense one portion to each bowl is
about 2.5g.
2. Recommended food size: 0.2-1.2cm(0.07-0.47inch)
diameter. Please use food smaller than 1.2cm, otherwise the
feeder may get stuck.
Add Pet Food
Press the lid open button to open the lid, pour the pet food
into the food container.
How to Remove the 2-way Splitter
Please hold the two sides with
both hands and press down
with thumbs can remove the
2-way splitter.

NOTE
To prevent the mold growth, it is recommended to change the
desiccant bag every 15 days
When the food hopper is short
of food, the blue light will
flash only when the next meals
dispense, it means the motor
run then the machine will
detect the food shortage.
Please add the food then the
light will turn off.
07
Install Desiccant Bag
Food shortage reminder
Please put the desiccant bag to the desiccant box to keep
pet food dry and fresh.

08
Maintenance
For your pet's health, please clean the food container, stainless
steel bowl and bowl holder regularly. The feeder host is not
washable, please wipe it with a dry cloth.

Software installation and setup
Smart Life
Please check and turn on your phone bluetooth and WIFI
before connecting
1.Confirm that the machine is powered by the adapter power.
（For saving battery power,The WiFi function can only be used
when the adapter powered）
2.Confirm that the WiFi network is 2.4Ghz.
（The feeder only works under 2.4Ghz network, does not
support 5Ghz）
Step 1. Install Smart Life APP
Scan the QR code to download or search “Smart Life” in the
app store to download and install the APP.
09

Step 2. Create your account and agree to connect to the
Internet:
Open the Smart Life app, agree to the Privacy Policy, select
correct country, use email or mobile number to register a user
account and log in, agree to grant local area network.
10

Step 3. Agree to Home Data, Notifications, Bluetooth
Permissions
11

12

RESET button
Step 4. Long press the device reset button to prepare for
pairing
Please use a sharp object to press the "RESET" button for 5s,
after the "beep", the WiFi indicator starts to flash quickly (once
per second) and the device enters the waiting state for pairing.
Note: The WIFI indicator is off when the power adapter is
not connected.
WIFI indicator light
13

Step 5. Pull to
refresh mobile
phone interface as
the picture:
Pull to refresh the
phone interface to
auto search for the
devices, the
available devices
will pop up, click
add devices
Step 6. Allow these APP permission, select your 2.4GHz WiFi
network and enter the WiFi password.
*******
TP-LINK_3256
14

Step 7. Please be patient for
waiting when the APP enters
to "add device” page, when
the device's WIFI indicator
stops flickering and stays on,
the APP interface jumps to
the device name modification
page, click , the APP
interface pops up the device
name modification viewwin-
dow, enter a new name and
click “Done”, The APP
returns to the “Add
Device” page, click
“Done”
Installation
progress
15

Step 8.The APP jumps to the feeder control page, and the
feeder is successfully connected to the Internet.
12H 60M
MEAL
Recording indicator
16
Recording Setting
Press“ ”and hold for three seconds then you can record
for Max 10 seconds after the recording indicator lighting up.
Release the button during recording as the recording is
completed.After finishing the recording, you can press
“ ”to play your recording. If you need to delete or close
the recording function, you can press“ ”double times
until the recording indicator light blinking 3 times, then the
recording message is removed.

Feeding
Manual Feeding
Select
food
portions
Feeding
confrim
Feeder: Manually feeding button
12H 60M
MEAL
Manually
feeding
button
17
1. Enter the feeder control page, click Manual feeding, select
the portions of food and click "OK" the feeder will dispense
immediately.
2. You can also press and hold the Manually feeding button on
the feeder for 3 seconds, after a "beep",The feeder will
dispense 1 portion.

18
Make a feeding meal plan
1. The feeder supports a daily 6-meal feeding plan, click the
feeding meals plan button to select the feedings portions
volume and meal time, open the feeding meals plan and
click Save.
Clik the
feeding meal
plan
Select the
feeding
portions
Select the
feeding
Portions you
need
Save after
set finished
Confirm
Select meal
time
Open the
feeding meals
plan button

19
View feeding records
1. Click " ”,
pull down to
open the page,
It will be display
feeding records.
2. If you need to disable
a feeding meal plan,
click the feeding meal,
close the feeding meals
plan button, and then
click Save.
1：Close the
feeding meals
plan button
2：Clik Save