Honeywell Captuvo SL22 User manual

Captuvo™SL22/42
Enterprise Sled for Apple
®
iPod touch
®
5/6 and iPhone
®
5
Quick Start Guide
CAPTUVOSL22-42-QS Rev C
09/15
Aller à www.honeywellaidc.com pour le français.
Vai a www.honeywellaidc.com per l'italiano.
Gehe zu www.honeywellaidc.com für Deutsch.
Ir a www.honeywellaidc.com para español.
Перейти на русскоязычный сайт www.honeywellaidc.com.
Pro češtinu jdi na www.honeywellaidc.com.
Pre slovenčinu choďna www.honeywellaidc.com.
Idźna stronę: www.honeywellaidc.com po quick start w języku polskim.
Türkçe için lütfen www.honeywellaidc.com sayfasını ziyaret ediniz.
Para Português, acesse www.honeywellaidc.com.br.
如要到中国 www.honeywellaidc.com（简体）。
查看繁体版请登陆 www.honeywellaidc.com.

Getting Started
Scan this bar code with your smartphone or visit
www.honeywellaidc.com/captuvoinstructions for a
Getting Started video.
The Captuvo SL22 Enterprise Sled (Agency Model: SL-ES-C) used
with the Apple®iPod touch®5/6 mobile digital device and the Cap-
tuvo SL42 (Agency Model: SL-ES-C) used with the Apple iPhone®5
include an optional integrated imager for scanning all types of bar
codes. An optional magnetic stripe reader (MSR) for reading cards
with magnetic stripes is also available for non-healthcare sleds.
Note: An imager is standard with the healthcare devices.
Note: Honeywell is not an authorized Apple repair center. Please
return only your sled to us for repair. Honeywell is not liable
for any non-Honeywell product shipped to our repair center.
Note: Refer to your Apple iPod touch and iPhone documentation for
important product and safety information.
User Documentation
To download the sled documentation, visit www.honeywellaidc.com.
For more information about the sleds, visit www.honeywellaidc.com/
honeywellios/captuvoenterprisesleds.html.
Note: Due to the availability of different models, your sled may look
slightly different from the illustrations included in this
document.

Front View
Mini USB Port
(for charging)
Scan
Button
Speaker
Door Release
(non-healthcare sleds
only)
Volume (SL42)/
Scan Buttons
On/Off Button
Door Release
(non-healthcare
sleds only)
Charging Contacts
(for charge base only)
Battery Door
Speaker
Audio Jack
(non-healthcare
sleds only)

Back View – Non-Healthcare Sled
Main Camera Access
Magnetic
Stripe Reader
(optional)
Lanyard Slot
Imager (optional)
Security Mechanism
(non-healthcare
sleds only)
LED
Security Mechanism
(non-healthcare
sleds only)

Back View – Healthcare Sled
Main Camera Access
Lanyard Slot
Imager
LED
Battery Door

Inserting the Battery
Ensure all components are dry prior to mating sleds/batteries with
peripheral devices. Mating wet components may cause damage
not covered by the warranty.
We recommend use of Honeywell Li-Ion battery packs. Use of any
non-Honeywell battery may result in damage not covered by the
warranty.
There is a danger of explosion if the batteries are incorrectly
replaced. Replace the batteries with only the same or equivalent
type recommended by the manufacturer. Dispose of used batter-
ies according to the recycle program for batteries as directed by
the governing agency for the country where the batteries are to be
discarded.
!
!
!

Non-Healthcare Sled Battery (1150 mAh)
Battery Door
Battery

Healthcare Sled Battery (3340 mAh)
Battery Door
Battery

Installing the Apple Device into a Non-
Healthcare Sled
1. For non-healthcare sleds, open the door by pushing the top
toward the front of the sled.
2. Slide your device into the sled.
Note: Be careful that the connectors are not accidentally damaged.

Installing the Apple Device into a
Healthcare Sled
1. For healthcare sleds, remove the four TORX (T6) screws on the
back of the unit.
Note: If you are using an Apple iPhone 5c, carefully remove the
adapter that is pre-installed in the sled. If you are using an
Apple iPhone 5/5s, leave the adapter installed.
Adapter