Honeywell Metrologic 3780 User manual

International Point of Sale: CornerStore POS
1
[phone] or [phone] International Point of Sale
Honeywell/Metrologic 3780 Scanning Guide

International Point of Sale: CornerStore POS
2
[phone] or [phone] International Point of Sale
This guide will go over how to set up the MS 3780 Scanner with CornerStore
The MS 3780 scanner requires no drivers or installation and can be used for CornerStore, however if you
already have items in your database, then the format of the codes may be different. The default for the
scanner is to read 8 digits on the UPC-E codes, and 12 digits on the UPC-A codes.
Check the barcode to the item number in the database to see how you need to configure the scanner.
UPC-E codes can read 6 to 8 digits. Whereas UPC-A codes can read 10-12 digits.
UPC-E UPC-A
To configure the scanner, all you need to do is to scan the barcodes below based on your need.
Restore Defaults

International Point of Sale: CornerStore POS
3
[phone] or [phone] International Point of Sale
UPC-E codes
Read the First Digit Do Not Read the First Digit
Read the Last Digit Do Not Read the Last digit

International Point of Sale: CornerStore POS
4
[phone] or [phone] International Point of Sale
UPC-A codes
Read the first digit Do not read the first digit
Read the last digit Do Not Read the Last Digit