Honeywell YJ HF600 User manual

Youjie™YJ HF600
Area-Imaging Scanner
Quick Start Guide
Rev A
2/16
Aller à www.honeywellaidc.com pour le français.
Para Português, acesse www.honeywellaidc.com.
Ir a www.honeywellaidc.com para español.
Перейти на русскоязычный сайт www.honeywellaidc.com.
Türkçe için www.honeywellaidc.com.
查看中文简体版请登陆 www.honeywellaidc.com.。
한글 www.honeywellaidc.com 로이동합니다 .
日本語 : www.honeywellaidc.com をご覧ください。
Vai a www.honeywellaidc.com per l'italiano.
Gehe zu www.honeywellaidc.com für Deutsch.
ǀƸŮǍƯŽȚǀưƴŽ www.honeywellaidc.com ǟŽȘǚƲƄſȚ

Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.honeywellaidc.com.
Getting Started
Turn off computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)

Connecting the Scanner
USB:
RS232:

Keyboard Wedge:
Reading Techniques
Present the bar code to the scanner. The LEDs turn up to read the
code.

Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Your keyboard layout default is a US keyboard. To change this lay-
out, scan the appropriate keyboard country code.
Standard Product Defaults
Belgium
Denmark
Finland
France
Germany/Austria
Great Britain
Italy

Suffix
If you want a carriage return after the bar code, scan the Add CR
Suffix bar code. To add a tab after the bar code, scan the Add Tab
Suffix bar code. Otherwise, scan the Remove Suffix bar code to
remove the suffixes.
Norway
Spain
Switzerland
USA
(Default)
Add CR Suffix
Remove Suffix
Add Tab Suffix

Add Code ID Prefix to all Symbologies
Scan the following bar code if you wish to add a Code ID prefix to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website, www.honeywellaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Prefix To All Symbologies (Temporary)
Enable
(Default)
Disable

Programming the Interface

Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR suffix
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
RS232 Interface
USB Serial Port Emulation

Scan Modes
When in IR Trigger mode, the scanner is activated when it “sees” a
bar code. After the bar code is read, the scan illumination will turn
off. When in IR Trigger - Mobile Phone mode, your scanner is
optimized to read bar codes from mobile phone or other displays.
When in Presentation mode, the scanner is activated when it “sees”
a bar code. After the bar code is read, the scanner continuously
searches for bar codes for 5 seconds. After 5 seconds and no bar
code is read, the scan illumination will turn off. When in
Presentation - Mobile Phone mode, your scanner is optimized to
read bar codes from mobile phone or other LED displays.
When in Streaming Presentation - Normal mode, the scanner
leaves the scan illumination on all the time and continuously
searches for bar codes. When in Streaming Presentation - Mobile
Phone mode, your scanner is optimized to read bar codes from
mobile phone or other LED displays.
IR Trigger Mode
(Default)
IR Trigger Mode - Mobile Phone
Presentation Mode
Presentation Scanning - Mobile
Phone
Streaming Presentation -
Normal
Streaming Presentation - Mobile
Phone