Honeywell V5832B Operation manual

® U.S. Registered Trademark EN0B-0408GE51 R0612
Copyright © 2012 Honeywell Inc. • All rights reserved
V5832B/V5833A
Small Linear Valves PN16
PRODUCT DATA
V5832B V5833A
GENERAL
These small linear valves are used in combination with small
electric linear valve actuators for the control of hot and/or
chilled water for fan coil units, small reheaters/recoolers in
electric/electronic temperature control systems. Because of
the pressure-balanced plug, the close-off pressure is equal to
the system pressure.
FEATURES
Pressure balanced plug
Range of fittings available for different connections
Easy to mount, no tools required
Flat sealing connections
Flat surfaces on body to fit installation tools
Standard external threads for Honeywell or field
supplied fittings
Adjustment cap for manual operation
SPECIFICATIONS
Model Two-way: V5832B
Three-way: V5833A
Operation Stem up to close port A to AB
Nominal pressure rating PN16
Capacity index (kVS) see tables on page 2
Leakage rate 0.05% of kVS
Valve body:
Material Brass resistant to dezincification
Size DN25 (1”), DN32 (11/4”),
DN40 (11/2”)
Trim:
Stem Stainless steel
Plug Brass
Suitable medium Water, with max. 50% glycol
Controlled water
temperature: 2...130C
Rangeability 50:1
Flow characteristic Linear for port A-AB,
linear for bypass port B-AB
Stroke 6.5 mm
Dimensions see Fig. 3 on page 4

V5832B/V5833A SMALL LINEAR VALVES PN16 – PRODUCT DATA
EN0B-0408GE51 R0612 2
FLOW CAPACITIES AND CLOSE OFF PRESSURE RATINGS
TWO-WAY VALVES
DN kVS order no.
close-off pressure (= max. operating
pressure) in kPa for 300-N actuators
(M6410C,L / M7410C1015 / M7410E1028)
close-off pressure (= max. operating
pressure) in kPa for 400-N actuators
(ML6435B / ML7430E / ML7435E)
25 4.0 V5832B2075 1600 1600
25 6.3 V5832B2083 1600 1600
25 10.0 V5832B2091 1600 1600
32 16.0 V5832B2109 1200 1200
40 25.0 V5832B2117 1000 1000
THREE-WAY VALVES
DN kVS order no.
close-off pressure (= max. operating
pressure) in kPa for 300-N actuators
(M6410C,L / M7410C1015 / M7410E1028)
close-off pressure (= max. operating
pressure) in kPa for 400-N actuators
(ML6435B / ML7430E / ML7435E)
25 4.0 V5833A2076 600 1600
25 6.3 V5833A2084 600 1600
25 10.0 V5833A2092 600 1600
32 16.0 V5833A2100 300 1200
40 25.0 V5833A2118 -- 1000
OPERATION
A built-in return spring produces a closing force.
The valves are supplied with an adjustment cap for manual
operation and to protect the stem. This allows the stem set up
for filling or initial heating/cooling during the building
construction phase without the use of a controller or actuator.
The small electric valve actuators provide automatic control
during the opening and closing movement of the valve stem.
TYPICAL OPERATION
All types of valves should be mounted in the return flow. If the
p-values exceed 60 kPa, attention should be paid to the
development of noise.
Two-Way Valves
Direction of flow always from port A to port B
Port B: Outlet
outlet
inlet
+
-
outlet
inlet
+
-
Fig. 1. Two-way valve operation
Three-Way Valves
These valves are preferably used as mixing valves, this
means:
Port AB: Total flow outlet
Port A: Controlled flow inlet
Port B: Bypass inlet
AB A
B
inlet
+
-
AB A
B
inlet
+
-
Fig. 2. Three-way valve operation

V5832B/V5833A SMALL LINEAR VALVES PN16 – PRODUCT DATA
3 EN0B-0408GE51 R0612
MOUNTING
When installing the valve care must be taken that the flow
direction is correct (see section "Typical Operation"). The
valve must not be mounted with the stem pointing downward.
The adjustment cap must be removed from the valve only
when the actuator is fitted. The valve should be installed as
stress-free as possible with a tightening torque of 25 to
30 Nm.
The valve is supplied complete with mounting instructions.
The water quality should meet VDI 2035 requirements.
ACCESSORIES
Valves V5832B need two connection sets, valves V5833A need three connection sets.
Connection Pipe Size DN Order Number Connection Set Description
External
Thread
R1"
R11/4"
R11/2"
25
32
40
AC-25T
AC-32T
AC-40T
Consisting of 1 union nut
1 tailpiece and 1 gasket
Internal
Thread
Rp1"
Rp11/4"
Rp11/2"
25
32
40
AC-25TF
AC-32TF
AC-40TF
Consisting of 1 union nut
1 tailpiece and 1 gasket
Dimensions of Connection Sets Order Number
a b c
G11/2”
G2”
G21/4”
R1”
R11/4”
R11/2”
AC-25T
AC-32T
AC-40T
G11/2”
G2”
G21/4”
Rp1”
Rp11/4”
Rp11/2”
AC-25TF
AC-32TF
AC-40TF

V5832B/V5833A SMALL LINEAR VALVES PN16 – PRODUCT DATA
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative:
Automation and Control Solutions
Honeywell GmbH
Böblinger Strasse 17
71101 Schönaich, Germany
Phone: [phone]
Fax: [phone]
http://ecc.emea.honeywell.com
Subject to change without notice. Printed in Germany
EN0B-0408GE51 R0612
DIMENSIONS
Fig. 3. Dimensions (in mm)
Allow 200mm fo
r
the actuator and
clearance for
removal
6.5 Stroke
18
A
llow 200mm fo
r
the actuator and
clearance for
removal
e
6,5 Stroke
18
V5832B
DN a b c d e
25 105 G11/2” 92 52.5 62
32 105 G2” 92 52.5 62
40 130 G21/4” 98 65.0 77
V5833A