Honeywell CIPer 30 Operating instructions

CIPerTM Model 30 Controller
INSTALLATION AND OPERATIONS GUIDE
July 2021
® U.S. Registered Trademark
Copyright © 2021 Honeywell Inc. • All Rights Reserved
31-00206 - 02

CIPer
TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
31-00206 - 02 2
Disclaimer
The material in this document is for information purposes only. The content and the product described are
subject to change without notice. Honeywell makes no representations or warranties with respect to this
document. In no event shall Honeywell be liable for technical or editorial omissions or mistakes in this
document, nor shall it be liable for any damages, direct or incidental, arising out of or related to the use of this
document. No part of this document may be reproduced in any form or by any means without prior written
permission from Honeywell.
Copyright © 2021 HONEYWELL International, Inc. All rights reserved.
Niagara Framework® is a registered trademark of Tridium Inc.
Trademark Notice
BACnet and ASHRAE are registered trademarks of American Society of Heating, Refrigerating and Air-
Conditioning Engineers. Microsoft, Excel, Internet Explorer, Windows, Windows Vista, Windows Server, and SQL
Server are registered trademarks of Microsoft Corporation. Oracle and Java are registered trademarks of Oracle
and/or its affiliates. Mozilla and Firefox are trademarks of the Mozilla Foundation. Echelon, LON, LonMark,
LonTalk, and LonWorks are registered trademarks of Echelon Corporation.
Niagara Framework ® is a registered trademark of Tridium Inc.
WEBs-AX, WEBs-N4 and WEBStation are registered trademarks of HONEYWELL International, Inc.

CIPerTM MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
3
31-00206 - 02
Table of Contents
About This Guide................................................................................................................................................ 4
Other Related Documents ...........................................................................................................................................................4
Abbreviations .....................................................................................................................................................................................4
About CIPer Model 30 Controller Programming Tool .......................................................................... 5
Software Requirements.................................................................................................................................................................5
Supported Operating Systems .....................................................................................................................................................................5
Supported Web Browsers................................................................................................................................................................................5
Installation ........................................................................................................................................................... 6
Prerequisites ......................................................................................................................................................................................6
Upgrading Licensing and Certificates ...................................................................................................................................6
Steps to install License and Certificate files..........................................................................................................................................6
Import Certificate from the local license database..........................................................................................................................10
Installing CIPer Model 30 Programming tools................................................................................................................11
Install WEBStation-N4.10.0.154..............................................................................................................................................................12
Procedure to Upgrade CIPer Model 30 Controller and Expansion IO..................................................................................... 12
Procedure 1: Distribution File Installer .......................................................................................................................................................12
Procedure 2: Using Commissioning Wizard ............................................................................................................................................15
Procedure 3: Using Niagara Provisioning Service ................................................................................................................................19
Verify Upgrade................................................................................................................................................................................ 22
To Verify Baseboard Version .......................................................................................................................................................................22
To Verify Expansion IO Baseboard Firmware Version.....................................................................................................................23
Launching Niagara N4 ................................................................................................................................. 25
Launching Niagara N4 from desktop..................................................................................................................................25
Launching Niagara N4 from application folder..............................................................................................................25
Launching Niagara N4 from taskbar...................................................................................................................................26
Configuring CIPer Model 30 Controller with WEBStation............................................................... 27
Configuring Platform and Station ............................................................................................................ 29
Configure platform.......................................................................................................................................................................29
Configure station ..........................................................................................................................................................................33
Communication Mode................................................................................................................................................................ 35
TCP/IP (Ethernet) Communication Setup...........................................................................................................................................35
Serial Communication setup......................................................................................................................................................................36
Reset to factory defaults............................................................................................................................................................ 37
Configuring RSTP .........................................................................................................................................................................40
Configuring RSTP via Workbench............................................................................................................................................................40

CIPer
TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
31-00206 - 02 4
About This Guide
This document serves as an installation guide to install the Honeywell CIPer Model 30 controller.
Released versions of the tool include a complete collection of technical information that is provided in
both online help and PDF format. The information in this document includes prerequisites for installing
the CIPer Model 30 controller and procedure like how to download and install the required software, to
help Systems Integrators and Engineers use the CIPer Model 30 controller. To make the most of the
information in this guide, readers should have some training or previous experience working with
Honeywell WEBs controllers, as well as Niagara 4 or Niagara AX software.
Other Related Documents
•CIPer 30 Expansion IO Installation Instruction - 31-00319
•CIPer 30 Expansion IO Product Data - 31-00239
•CIPer Model 30 Installation and Operation Guide - 31-00206
•CIPer Model 30 Installation Instruction - 31-00183
•CIPer Model 30 Product Data - 31-00236
•CIPer Model 30 Hardening Guide - 31-00207
•CIPer Model 30 Quick Setup Guide - 31-00446
•Software Release Bulletin
•Niagara 4 Installation Guide
For more details about CIPer Model 30 controller, refer The Honeywell Buildings Forum.
Abbreviations
Abbreviation Full Form
CIPer IP Controller
GHz Gigahertz
GB Gigabytes
RAM Random Access Memory
HDD Hard Disk Drive

CIPerTM MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
5
31-00206 - 02
About CIPer Model 30 Controller Programming Tool
CIPer Model 30 is a unitary IP edge controller (interchangeably called IPC or ipc) designed by Honeywell.
The controller device series is WEB-C3036. It is designed for Variable Air Volume (VAV), unitary and plant
applications. You can use the CIPer Model 30 controller for aggregating the real-time information—
alarms, trends, and history. In future, the controller will also be able to further integrate the aggregated
information to the Sentience Cloud for value-added data analytics.
Honeywell CIPer Model 30 controller added many new features and performance upgrade. For more
information about new enhancement and performance upgrade, refer Software Release Bulletin.
Software Requirements
Niagara WEBs-N4 4.7 installer program supports both “Professional” and “Enterprise” version of
operating systems (OS) as shown in the following table. The installer also supports installation on
Windows Server 2012 and Windows Server 2012 R2.
Supported Operating Systems
Table 1: Supported Operating Systems
Operating Systems Niagara 4.7
Windows 7 (32-bit) Yes
Windows 7 (64-bit) Yes
Windows 8.1 (64-bit) Yes
Windows 10 (64-bit) Yes
For a detailed matrix of supported operating systems, refer to the Niagara-Central Knowledge Article -
Supported Operating Systems And Relational Database Servers For Niagara Installations.
Supported Web Browsers
In the UserService folder under Station > Config > Services in the Nav tree, the Default Web Profile must
be Default Wb Web Profile. This is useful when you need to access and control the CIPer 30 controller
remotely. The default value for Default Web Profile is HTML5 Hx Profile, which is not supported.
Note:
•CIPer Model 30 programming tool supports all modern browsers, but support is limited only to
few views. When you do not have workbench access, use Web Start to get the complete access to
all the views.
•All the latest versions of web browsers have disabled support for NPAPI, which prevents the Java
Wb Applet from running in Niagara 4. You can use another browser that supports the plugin or
use the HTML5 HxProfile.
•Refer Niagara 4 Installation guide to get support for Niagara web launcher.

CIPer
TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
31-00206 - 02 6
Installation
CIPer Model 30 programming tool installation section provides you information about prerequisite
requirements and installation process utilized while integrating CIPer Model 30 programming tool on
your system.
Prerequisites
To install the CIPer Model 30 programming tool on your system, you should meet the following
prerequisites requirements.
•You should have Niagara WEBs N4 4.7 installed on your system, refer Niagara 4 Installation Guide.
•Download the latest version of the CIPer Model 30 programming tool from The Honeywell
Buildings Forum website.
•It is recommended to refer latest Software Release Bulletin of CIPer Model 30 controller, before
you run installation. Software Release Bulletin contains all the information regarding last
enhancement, fixes and build versions of the software for the CIPer Model 30 controller.
Upgrading Licensing and Certificates
You can install CIPer Model 30 controller license locally or from licensing server.
Note:
CIPer Model 30 controller shipped with pre-installed license and certificates. But, if you perform the
factory reset, then you need to reinstall licenses and certificates. Follow the below steps to reinstall the
licenses and certificates for CIPer 30 controller.
If the license or certificate of CIPer 30 controller is removed or deleted accidently, connect to Niagara
Central or request for license to WEBs License.
Steps to install License and Certificate files
1. Connect to platform, expand the platform, and then select License Manager.
This action displays License Manager window, license manager window comprises of License
and Certificate section.

CIPerTM MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
7
31-00206 - 02
2. Select Import option from bottom of the License section. The Import License window is displayed.
•Import one or more license from files: To import license from the local file.
•Import license from the local license database: To import license from the local
database. This option is enabled when there is a local license database.
•Import Honeywell IPC (Honeywell Webs 4.7) licenses from the licensing server: To
import license from the licensing server in case there are no license present in the local
files and databases. When you select this option for importing license, the application
displays following window to restart the station.
Import one or more license from files
(a) If you saved the license file locally, select Import one or more license from files option, and
click OK.
(b) Navigate to the license file the directory and select the license file.

CIPer
TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
31-00206 - 02 8
(c) Click OK. The import status is shown in the window displayed.
(d) Click Ok. This completes licensing.
Import Honeywell license from the licensing server
(a) If you have access to licensing server, select Import Honeywell IPC (Honeywell Webs 4.7)
licensing form the licensing server option, and click OK.
(b) Select Import option from bottom of the certificate section.

CIPerTM MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
9
31-00206 - 02
(c) Click Next.
(d) Click OK. This completes licensing from licensing server

CIPer
TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
31-00206 - 02 10
Import Certificate from the local license database
(a) Select the certificate file from the directory and click OK.
Installer displays import status of license and certificates.
Note:
After you completed installation of license and certificates for CIPer 30 controller. Restart the
workbench, this will apply all the updates.

CIPerTM MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
11
31-00206 - 02
Installing CIPer Model 30 Programming tools
This section guides to upgrade procedure of the core files, software, and firmware of the CIPer Model 30
controller and expansion IO to the latest build.
Check the power requirements of the controller and the expansion IO modules as specified in the product
datasheets. To avoid overloading the power supply while upgrading, the firmware in the expansion IO modules
can be upgraded later individually, by using the associated distribution files just for the expansion IO modules.
IMPORTANT
All modules must be signed
•Niagara version N4.10 requires all modules to be signed with a valid certificate. If you are using
third-party modules, ensure that they are signed with a valid certificate using Niagara’s Jar
Signing Tool. For more details on the Niagara Third-Party Module Signing procedure, refer to the
Niagara Third-Party Module Signing link or below Niagara internal help links (ORDs)
oSigning A Third Party Module:
module://docModuleSign/doc/CreateCodeSigningCertificate-28E327C0.html
oStaged roll-out: module://docModuleSign/doc/StagedRoll-outModuleSigning-
182E7CC0.html
oVerification modes: module://docModuleSign/doc/VerificationModesModuleSigning-
182D0E86.html
If you attempt to upgrade an existing CIPer Model 30 controller with an unsigned module, the
station will not start.
For users using WEBs N4.8 version in CIPer Model 30 controller
•While installing any other tool packages in CIPer Model 30 controller, if CIPer Model 30 modules
are getting overridden then ensure to copy the corresponding modules .sig files that are present
along with modules using the "File Transfer Client" mechanism in Niagara.
•If the corresponding .sig file for the module is not installed in CIPer Module 30 controller, then
during reboot those modules will be uninstalled and the station will fail to start.
Steps to Upgrade
1. Download and install the WEBStation-N4.10.0.154
2. Upgrade using one of the following methods:
You can install a single controller or multiple controllers.
a) For single CIPer Model 30 Controller –use Distribution File Installer or Commissioning Service
b) For multiple CIPer 30 Model Controllers –use Provisioning Service
•Upgrade using Distribution File Installer
•Upgrade using Commissioning Wizard
•Upgrade using Provisioning Service
3. Verify that the upgrade is successful.

CIPer
TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
31-00206 - 02 12
Install WEBStation-N4.10.0.154
Download and install WEBStation-N4.10.0.154 on your system.
Procedure to Upgrade CIPer Model 30 Controller and Expansion IO
Procedure 1: Distribution File Installer
Following are the dist files required to upgrade CIPer Model 30 controller and Expansion IO using the
Distribution File installer:
Files required for Distribution File Installer
Tools File Name Version
WEB-O3022H Firmware honeywell-IPCSIO.dist 1.1.0.76
WEB-O9056H Firmware honeywell-IPCIO.dist 1.1.0.140
Baseboard Firmware honeywell-IPCBASE.dist 1.1.1.146
OS QNX honeywell-IPCQNX.dist 7.0.4.4
JRE honeywell-azul-ejre-ipcqnx-arm.dist 1.8.0.282
IPC Tools honeywell-IPC-tool.dist 4.10.0.1.1.257
IPC Module honeywell-IPC-module.dist 4.10.0.154
Niagara Core Software nre-core-honeywell-IPCQNX-arm.dist 4.10.0.154.4
Niagara Config Software nre-config-honeywell-IPC.dist 4.10.0.154.6
NOTE
Factory Reset Image
•The honeywell-IPC-factory.dist file can be used to reset the CIPer Model 30 Controller to
factory settings. To install the honeywell-IPC-factory.dist file, use Distribution file installer.
•The factory reset image should only be installed after the upgrade process has been verified
successfully.
•At this time, installing the Factory reset is not possible with Commissioning Service and
Provisioning service
NOTE
Honeywell Buildings Forum access requires a valid login to download the software.
NOTE
•For upgrading all components in a single installation use nre-config-honeywell-
IPC.dist file. This file installs all of the individual components of CIPer Model 30 core
files, baseboard firmware, expansion IO firmware, and CIPer Model 30 modules.

CIPerTM MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
13
31-00206 - 02
Steps To Run Distribution File Installer
1. Connect to the platform and click Distribution File Installer.
•For upgrading only controller tool use honeywell-IPCtool-4.10.0.1.1.257.dist file for
installation.
•For upgrading controller baseboard firmware use honeywell-IPCBASE.dist-
1.1.1.146.dist file for installation.
•For upgrading large expansion IO firmware, use honeywell-IPCIO-1.1.0.140.dist file
for installation.
•For upgrading small expansion IO firmware, use honeywell-IPCIO-1.1.0.76.dist file
for installation.

CIPer
TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
31-00206 - 02 14
2. Locate the folder containing (.dist) file from the C:/Honeywell/WEBStation-N4-
4.10.0.154/sw/4.10.0.154.6 directory, select the folder, and select OK.
3. Select the required .dist file and click Install, this action installs the (.dist) file.
NOTE
After this step, the controller automatically stops and reboots the station.

CIPerTM MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
15
31-00206 - 02
Procedure 2: Using Commissioning Wizard
Following are the dist files required to upgrade CIPer Model 30 controller and Expansion IO using
Commissioning Wizard:
Files Required for Commissioning Wizard
Tools File Name Version
WEB-O3022H Firmware honeywell-IPCSIO.dist 1.1.0.76
WEB-O9056H Firmware honeywell-IPCIO.dist 1.1.0.140
Baseboard Firmware honeywell-IPCBASE.dist 1.1.1.146
OS QNX honeywell-IPCQNX.dist 7.0.4.4
JRE honeywell-azul-ejre-ipcqnx-arm.dist 1.8.0.282
IPC Tools honeywell-IPC-tool.dist 4.10.0.1.1.257
IPC Module honeywell-IPC-module.dist 4.10.0.154
Niagara Core Software nre-core-honeywell-IPCQNX-arm.dist 4.10.0.154.4
Niagara Config Software nre-config-honeywell-IPC.dist 4.10.0.154.6
Steps To Perform Commissioning Wizard
1. Log in to the Platform of the CIPer Model 30 using the WEBStation-N4- N4.10.0.154 workbench.
2. Run the Platform Administration from platform view.
3. Select Commissioning Wizard.
NOTE
Installing the honeywell-IPC-factory.dist file is not supported via commissioning.

CIPer
TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
31-00206 - 02 16
4. Uncheck all default checkboxes, except “Install/Upgrade core software from distribution files” (see
below) and click Next.
5. Select the licensing options and click Next.

CIPerTM MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
17
31-00206 - 02
6. Click Next.
7. The install/upgrade core software from the distribution file should look like the below image. If not,
then go back and make sure the files from the zip folder were copied to the correct location and that
the WEBs N4 4.9.0.198 workbench was restarted.
NOTE
DO NOT click the Upgrade All Out of Date during the Install/Upgrade core modules
step (refer below image).

CIPer
TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
31-00206 - 02 18
8. Click Next and complete the commissioning wizard.
Wait for several minutes to complete the controller upgrade. After the upgrade is complete you will be able
to log in to the platform of the controller.

CIPerTM MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
19
31-00206 - 02
Procedure 3: Using Niagara Provisioning Service
Following are the dist files required to upgrade CIPer Model 30 controller and Expansion IO using for
Provisioning Service:
Files Required for Niagara Provisioning Service
Tools File Name Version
WEB-O3022H Firmware honeywell-IPCSIO.dist 1.1.0.76
WEB-O9056H Firmware honeywell-IPCIO.dist 1.1.0.140
Baseboard Firmware honeywell-IPCBASE.dist 1.1.1.146
OS QNX honeywell-IPCQNX.dist 7.0.4.4
JRE honeywell-azul-ejre-ipcqnx-arm.dist 1.8.0.282
IPC Tools honeywell-IPC-tool.dist 4.10.0.1.1.257
IPC Module honeywell-IPC-module.dist 4.10.0.154
Niagara Core Software nre-core-honeywell-IPCQNX-arm.dist 4.10.0.154.4
Niagara Config Software nre-config-honeywell-IPC.dist 4.10.0.154.6
Niagara provisioning service allows you to upgrade multiple CIPer Model 30 controllers and Expansion IO
For additional information on setting up provisioning service see the CIPer Model 30 Installation and
Operation Guide - 31-00183 or open the following ORD (local:
module://docProvisioning/doc/ProvisioningInstall.html) on your workbench:
NOTE
Installing the honeywell-IPC-factory.dist file is not possible by Provisioning Service.
NOTE
The station names in each of the CIPer Model 30 controllers must be unique in order to
add them as a remote Niagara station in the Niagara station manager. The station in the
CIPer Model 30 controller need not be running in order to update the controller. You must
configure the platform connection of the controller to perform the update.
By default, only one station will be upgraded at a time. In order to upgrade multiple
controllers at the same time do the following
Navigate to the AX property sheet of the job prototype and set the Force unsafe parallel
execution to True, refer to the screenshot below.

CIPer
TM
MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE
31-00206 - 02 20
Steps To Perform Provisioning Service
1. Navigate to the ProvisioningNiagara palette, add a new NetworkJobPrototype to any place in the
station under Config (NiagaraNetwork for example) and name the job prototype (example -
CIPer30_1.1.4_Upgrade).
2. Click the (+) icon from Steps run for each station section, select Upgrade Out-of-date Software, and
then click OK.
You can view the list of jobs defined for the required stations.
3. Click the (+) icon from Stations to include in the job section, select the checkbox to select a specific
station, or select the Check All option to select the all listed station, and then click OK.
NOTE
Make sure to increase the Device Reboot Timeout from 10 minutes to 15 minutes if you are
connecting more than 6 expansion IO to the CIPer Model 30 controller.