Honeywell MN6110 User manual

INSTALLATION INSTRUCTIONS
62-0224—1
MU1B-0314GE51 R0606B
MN6105, MN6110, MN7505, MN7510
Non-Spring Return
Direct Coupled Actuators
Disconnect power before installation.
1
2
MIN. 1-3/4 IN.
(41 MM)
M13649
90°
ANGLE
12
M25201
3
4
12
M13651
1
2
M25202
34
2
IP54 IP54IP54 IP54
M25200

MN6105, MN6110, MN7505, MN7510 NON-SPRING RETURN DIRECT COUPLED ACTUATORS
62-0224—1 2
MU1B-0314GE51 R0606B
Mounting on Counterclockwise (CCW) or Clockwise (CW) Closing Damper
8 MM
3
2
8 Nm
M25203
1
CCW-CLOSING DAMPER
8 MM
1
3
2
8 Nm
M25204
CW-CLOSING DAMPER
M25205
5.5°, 11°,
16.5°, 22°...
3.0 TO
3.5 Nm
2
1
3
OPTIONAL STEP
M25206
12 3 4 5 6
REMOVABLE
ACCESS COVER
1
2M25207
7/32 (5)
1-1/2 ±1/8
(38 ±3)
54321
M25208
1-3/16 ±1/8
(30 ±3)
S6S5S3S2S1
7/32 (5)
M25209
20 mm
6 Nm
M25210 M25218

MN6105, MN6110, MN7505, MN7510 NON-SPRING RETURN DIRECT COUPLED ACTUATORS
362-0224—1
MU1B-0314GE51 R0606B
Wiring
FLOATING: DIR
24 VAC
1
1
2
2
LINE VOLTAGE POWER SUPPLY.
PROVIDE DISCONNECT MEANS AND
OVERLOAD PROTECTION AS REQUIRED.
24 VDC SUPPLY ACCEPTABLE.
M23107
ACTUATOR
V
5
4
3
1
2
Dir
Service/Off
Rev
MN6105, MN6110
TWO-POSITION: DIR
24 VAC
1
1
2
2
LINE VOLTAGE POWER SUPPLY.
PROVIDE DISCONNECT MEANS AND
OVERLOAD PROTECTION AS REQUIRED.
24 VDC SUPPLY ACCEPTABLE.
M23108
ACTUATOR
V
FEEDBACK
5
4
3
1
2
Dir
Service/Off
Rev
MN6105, MN6110
5° 85°
S1 S2 S3 S5 S6
M25214
END SWITCHES (CLASS II-ONLY)
MN7505, MN7510
MODULATING: 0[2]... 10 V, 10... 0[2] V
24 VAC
1
1
2
2
LINE VOLTAGE POWER SUPPLY.
PROVIDE DISCONNECT MEANS AND
OVERLOAD PROTECTION AS REQUIRED.
24 VDC SUPPLY ACCEPTABLE.
M25211
ACTUATOR
V
OR +
FEEDBACK
5
4
3
1
2
Dir
Service/Off
Rev
2... 10 V
0... 10 V
10... 0 V
10... 2 V
0[2]... 10 V
= OVERRIDE OPTION
0[2]... 10 V
POS 50%
TWO-POSITION: DIR
24 VAC
1
1
2
2
LINE VOLTAGE POWER SUPPLY.
PROVIDE DISCONNECT MEANS AND
OVERLOAD PROTECTION AS REQUIRED.
24 VDC SUPPLY ACCEPTABLE.
M25212
ACTUATOR
V
OR N/A
OR +
FEEDBACK
5
4
3
1
2
Dir
Service/Off
Rev
2... 10 V
0... 10 V
10... 0 V
10... 2 V
0[2]... 10 V
REQUIRED FOR FEEDBACK USE
MN7505, MN7510
FLOATING: DIR
24 VAC
1
1
2
2
LINE VOLTAGE POWER SUPPLY.
PROVIDE DISCONNECT MEANS AND
OVERLOAD PROTECTION AS REQUIRED.
24 VDC SUPPLY ACCEPTABLE.
M25213
ACTUATOR
V
OR N/A
OR +
FEEDBACK
5
4
3
1
2
Dir
Service/Off
Rev
2... 10 V
0... 10 V
10... 0 V
10... 2 V
0[2]... 10 V
REQUIRED FOR FEEDBACK USE
MN7505, MN7510

MN6105, MN6110, MN7505, MN7510 NON-SPRING RETURN DIRECT COUPLED ACTUATORS
Automation and Control Solutions
Honeywell International Inc. Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9
Honeywell GmbH
Böblinger Straße 17
D-71101 Schönaich
customer.honeywell.com
® U.S. Registered Trademark
© 2006 Honeywell International Inc.
MU1B-0314GE51 R0606B
62-0224—1 J.I. Rev. 06-06
Adjusting for Counterclockwise (CCW) or Clockwise (CW) Closing Damper/Synchronization
M25217
~3 MIN
POWER ON
~3 MIN
SERVICE/OFF
(>2 SEC.)
MN7505, MN7510 ONLY
SYNCHRONIZATION
Service/Off
Dir
Rev
2... 10 V
0... 10 V
Dir
Rev
10... 2 V
Service/Off
10... 0 V
M25216
MN6105, MN6110
MN7505, MN7510
CW-CLOSING
Service/Off
Dir
Rev
2... 10 V
0... 10 V
Dir
Rev
10... 2 V
Service/Off
10... 0 V
M25215
MN6105, MN6110
MN7505, MN7510
CCW-CLOSING
By using this Honeywell literature, you agree that Honeywell will have
no liability for any damages arising out of your use or modification to,
the literature. You will defend and indemnify Honeywell, its affiliates
and subsidiaries, from and against any liability, cost, or damages,
including attorneys’ fees, arising out of, or resulting from, any
modification to the literature by you.