Honeywell 35 Series User manual

Honeywell 35 Series
Network Video Recorder
HN35040100
HN35040101
HN35040102
HN35040104
HN35040106
HN35040108
HN35040110
HN35080200
HN35080202
HN35080204
HN35080208
HN35080210
HN35080216
HN35160200
HN35160204
HN35160208
HN35160210
HN35160216
HN35160220
HN35040100N
HN35080100N
HN35160200N
User Guide

Recommended
Find the latest version of this and other Honeywell 35 Series NVR documents on our website:
https://buildings.honeywell.com/security.
Copy Right
© 2022 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any
means without written permission from Honeywell. The information in this publication is believed to be
accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting
from the use thereof. The information contained herein is subject to change without notice. Revisions or new
editions to this publication may be issued to incorporate such changes. For patent information, see
https://buildings.honeywell.com/us/en/support/legal/patents.
Revision
Issue
Date
Revisions
A
0
5/2022
New document.

i
Honeywell 35 Series Network Video Recorder User Guide
Cautions and Warnings
Warning:
Installation and servicing should be performed only by
qualified and experienced technicians to conform to all
local codes and to maintain your warranty.
Warning:
Use only with the supplied power cable.
Power output: HN350401xx for 45W and HN350802xx/
HN351602xx for 130W, PoE 802.3at/af in total.
Caution:
The Honeywell product uses a 3.3V CR2032 lithium
battery as the power supply for its internal real-time clock
(RTC). Low battery power affects the operation of the
RTC, causing it to reset at every power-up.
Risk of explosion if the battery is incorrectly replaced.
Dispose of used batteries according to local regulations or
the battery manufacturer's instructions.
Make sure the product is power-down before removal.
Then carefully remove the battery.
Replace only with an identical battery or a battery which
is recommended by Honeywell.
Regulatory Statements
FCC Compliance Statement
Information to the User: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio

ii
Honeywell 35 Series Network Video Recorder User Guide
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Manufacturer’s Declaration of Conformance
North America
The equipment supplied with this guide conforms to UL 62368-1 and CSA
C22.2 No. 62368-1.
Europe
The manufacturer declares that the equipment supplied is compliant with
the European Parliament and Council Directive on the restriction of the
use of certain hazardous substances in electrical and electronic
equipment (2015/863/EU), the Low Voltage Directive (2014/35/EU) and
the essential requirements of the EMC directive
(2014/30/EU),conforming to the requirements of standards EN
55032/EN61000-3-2/EN 61000-3-3/EN 61000-6-4 for emissions, EN
50130-4/EN 55024/EN 55035 for immunity, and EN 62368-1 for
electrical equipment safety.
CAUTION This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user may be
required to take adequate measures.
Waste Electrical and Electronic Equipment (WEEE)
Correct Disposal of this Product (applicable in the European Union
and other European countries with separate collection systems).
This product should be disposed of, at the end of its useful life, as
per applicable local laws, regulations, and procedures.
Check Local Waste Guidelines
Components of this product require separate waste collection. Check local
waste guidelines for sorting rules.

iii
Honeywell 35 Series Network Video Recorder User Guide
General Data Protection Regulation
Please be aware that this product can store personal data.
Personal data is protected by the General Data Protection Regulation
(2016/679) in Europe and therefore the owners of personal data have
obtained certain rights thanks to this regulation.
We strongly advise you to be fully aware of these owner (“data subjects”)
rights as well as which limitations you have to obey regarding the use and
distribution of this data.
Further details can be found on the GDPR website of the EU:
https://ec.europa.eu/commission/priorities/justice-and-fundamental-
rights/data-protection/2018-reform-eu-data-protection-rules_en
Safety Instructions
Before installing or operating the unit, read and follow all instructions.
After installation, retain the safety and operating instructions for future
reference.
HEED WARNINGS - Adhere to all warnings on the unit and in the operating instructions.
INSTALLATION
•Install in accordance with the manufacturer’s instructions.
•Installation and servicing should be performed only by qualified and
experienced technicians to conform to all local codes and to maintain
your warranty.
•Any wall or ceiling mounting of the product should follow the
manufacturer’s instructions and use a mounting kit approved or
recommended by the manufacturer.
OPERATION REQUIREMENT
•Install the PoE front-end device indoors.
•The device does not support wall mount.
•Do not place and install the device in an area exposed to direct sunlight
or near heat generating device.
•Do not install the device in a humid, dusty or fuliginous area.
•Keep its horizontal installation, or install it at stable places, and prevent
it from falling.
•Do not drip or splash liquids onto the device; do not put on the device
anything filled with liquids, to prevent liquids from flowing into the
device.
•Install the device at well-ventilated places; do not block its ventilation
opening.

iv
Honeywell 35 Series Network Video Recorder User Guide
•Use the device only within rated input and output range.
•Do not dismantle the device arbitrarily.
•Transport, use and store the device within allowed humidity and
temperature range.
POWER SOURCES - This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power supplied to
your facility, consult your product dealer or local power company.
MOUNTING SYSTEM - Use only with a mounting system recommended by the
manufacturer, or sold with the product.
ATTACHMENTS/ACCESSORIES - Do not use attachments/accessories not
recommended by the product manufacturer as they may result in the risk of fire, electric
shock, or injury to persons.
CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
SERVICING - Do not attempt to service this unit yourself. Refer all servicing to qualified
service personnel.
REPLACEMENT PARTS - When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock or other hazards. Using replacement parts or accessories other than the original
manufacturers may invalidate the warranty.
WASTE- Components of this product require separate waste collection. Check local
waste guidelines for sorting rules.
Warranty and Service
Subject to the terms and conditions listed on the product warranty, during
the warranty period Honeywell will repair or replace, at its sole option, free
of charge, any defective products returned prepaid.
In the event you have a problem with any Honeywell product, please call
Customer Service at 1.800.323.4576 for assistance or to request a Return
Merchandise Authorization (RMA) number.
Be sure to have the model number, serial number, and the nature of the
problem available for the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits.
Items shipped to Honeywell without a clearly identified Return
Merchandise Authorization (RMA) number may be refused.
List of Symbols
The following is a list of symbols that might appear on the NVR.

v
Honeywell 35 Series Network Video Recorder User Guide
Table 1 List of Symbols
Symbol Explanation
The WEEE symbol.
This symbol indicates that when the end-user wishes to
discard this product, it must be sent to separate collection
facilities for recovery and recycling. By separating this
product from other household-type waste, the volume of
waste sent to incinerators or landfills will be reduced, and
thus natural resources will be conserved.
The UL compliance logo.
This logo indicates that the product has been tested and is
listed by UL (formerly Underwriters Laboratories).
The FCC compliance logo.
This logo indicates that the product conforms to Federal
Communications Commission compliance standards.
The direct current symbol.
This symbol indicates that the power input/output for the
product is direct current.
The alternating current symbol.
This symbol indicates that the power input/output for the
product is alternating current.
The LDPE symbol.
This symbol indicates that this product is made of Low-
Density Polyethylene (LDPE).
The Direct Current symbol.
This symbol indicates that the product operates from a 12
V direct current.
The Lead-free symbol.
This symbol indicates that the product does not contain
lead (Pb).
The CCC compliance logo.
This logo indicates that the product conforms with the
China Compulsory Certification guidelines.
The Environment Friendly Use-period symbol.
This symbol indicates the length of time that this electronic
product can used without harming the environment.
The RCM Compliance symbol.
This symbol indicates that the product conforms with the
Australian RCM guidelines.

vi
Honeywell 35 Series Network Video Recorder User Guide
The TVU Lab symbol.
This symbol indicates that the product has been safety
tested by the TUV Lab.
The Direct Current symbol.
This Direct Current symbol indicates that the product
operates direct current.
This symbol indicates that the product is to be used
indoors.
The CE Compliance logo.
This logo indicates that the product conforms to the
relevant guidelines/standards for the European Union
harmonization legislation.
The Protective Earth symbol.
This symbol indicates that the marked terminal is intended
for connection to the protective earth/grounding
conductor.
This symbol is used to direct attention to important
information.
This symbol warns that the corresponding action could
result in an electric shock.
This symbol indicates On/Standby functionality of the
corresponding control/button/switch.

I
Honeywell 35 Series Network Video Recorder User Guide
TABLE OF CONTENTS
About This Document...................................................................1
Overview of Contents....................................................................................................... 1
1Introduction...............................................................................1
Overview................................................................................................................................ 1
Key Features........................................................................................................................ 1
Network Video Recorder Components...................................................................... 3
Front Panel and Rear Panel.................................................................................... 3
Mouse Operation ......................................................................................................11
2Getting Started.....................................................................13
Unpacking the NVR ........................................................................................................13
Connecting External Devices .....................................................................................13
Devices Connection.................................................................................................14
Starting and Shutting Down the NVR......................................................................17
Starting the NVR........................................................................................................17
Shutting Down the NVR..........................................................................................17
Device Initialization........................................................................................................18
Device Wizard....................................................................................................................20
Resetting Password........................................................................................................24
Enabling Password Reset Function ..................................................................24
Resetting Password on Local Interface ...........................................................25
Home Page ........................................................................................................................26
Two-way Talk.....................................................................................................................26
Device-end to IPC .....................................................................................................26
IPC-end to the Device-end....................................................................................27
3Local Basic Operation .....................................................29
Configuring Camera.......................................................................................................29
Camera..........................................................................................................................29
Encode ..........................................................................................................................35
Sensor Setting............................................................................................................36
OSD ................................................................................................................................37
POE Status ..................................................................................................................38

Honeywell 35 Series Network Video Recorder User Guide
II
Configuring Storage Settings.....................................................................................38
Record Schedule .......................................................................................................38
Disk.................................................................................................................................40
Storage Mode .............................................................................................................41
S.M.A.R.T.......................................................................................................................42
Disk Detection............................................................................................................42
Disk Calculation ........................................................................................................43
FTP..................................................................................................................................44
Configuring Events Settings.......................................................................................46
General..........................................................................................................................46
Motion Detection ......................................................................................................47
Camera Tampering ..................................................................................................53
Video Loss....................................................................................................................53
Intelligent Analysis...................................................................................................54
Alarm In.........................................................................................................................56
Abnormal Events.......................................................................................................58
Alarm Out .....................................................................................................................59
Local Intelligent Analysis.......................................................................................60
Configuring Network Settings....................................................................................61
Network.........................................................................................................................62
802.1X ...........................................................................................................................65
DDNS .............................................................................................................................66
Port Mapping..............................................................................................................67
Email..............................................................................................................................68
P2P .................................................................................................................................69
IP Filter..........................................................................................................................71
SNMP.............................................................................................................................72
Network Traffic...........................................................................................................74
Access Platform.........................................................................................................75
Configuring System Settings .....................................................................................76
Information .................................................................................................................76
General..........................................................................................................................78
User Account ..............................................................................................................81
Security Center ..........................................................................................................85
Layout............................................................................................................................87
Logs................................................................................................................................88
Maintenance...............................................................................................................89
Configuring Live View Settings..................................................................................91
Live View.......................................................................................................................91
Live View Control Interface ...................................................................................93