Honeywell MIWI350 User manual

MIWI350 Power or Communications Box Quick Start Guide
Product Features
• Internal or External Mounted Display
•Optional Backup Battery for Uninterrupted EVC Functionality
Power Supply Options
General Safety Precautions
Warning
Caution
Safety and Hazardous Information
Product Overview
Solar Power with rechargeable Sealed Lead-Acid Battery (Refer to FD-612)
Battery - Alkaline Packs (Dual/Quad) (Refer to FD-613)
Modem Power Control
Available in Wall, Pipe, and Portable mounting options
Compatible with MasterLink and PowerSpring software
CSA C/US Class 1, Division 2, Group C & D
or Electronic Recorder
A built-in electronic cellular modem
This quick-start guide covers the Power or Communications box variant only.
Close the door of the MIWI350 device properly
Check the lock and latchet, and lock the MIWI350 device properly
Check the padlock properly while locking the MIWI350 device
AC/DC Power Supply (Refer to FD-611) - Future Release

Unpacking
Af
1.
2. Check the shipment against the invoice to ens s
3. rt any shor st Honeywell Account Manager.
Wall Mount Pipe Mount
Ins following mounting options:
Instrument Mounting Options
Opening and Closing the Door
01
properly. Also,
latchet,
06
Portable Mount
2
Route the external power cable
through the 05 gland and
connect to power terminal block
02
check
03
05
04
Release the door latches of
the device one at a time, and
open the door of the device

Installing the Dual / Quad Battery Packs
02
01
03
04
3
(+cw)
(-cw)
(Or)
the guides of bracket and case
Insert the battery pack in the mount bracket through

Connecting Solar Power and Lead-Acid Battery
01 02
03
04
05
For a fresh Lead-Acid Battery, the No Load Voltage is expected to be between 12.5–13.5VDC.
WARNING: Please perform the No Load Battery Voltage measurement in an area rendered
Non Hazardous. Please exercise caution to ensure the Battery Terminals do not come in
contact with any other metal objects during the measurement/handling.
Configure modem/EC/ERX350/HMI settings
(For more information, refer MIWI350 Installation and Operational Manual - FD-610)
4

POWER/COMMUNICATION BOX WIRING (WITH CLOUDLINK 4G MODEM) POWER/COMMUNICATION BOX WIRING (WITH CLOUDLINK 4G M1 MODEM)
5
Barrier Connections Barrier Connections
Terminal Block Connections Terminal Block Connections

©2019 Honeywell International Inc
For more information:
To learnmore outoneywells Smart Gas
Metering Solutions, visit
www oneywellprocess com or contact your
eywell Process Solutions representative
Honeywell Process Solutions
128 Kemper Me ow Drive Cincinnati,
O
FD-614 | Rev B | January 2020
POWER/COMMUNICATION BOX WIRING (WITH RV50/RV50X MODEM)
NOTES
INTERNAL ANTENNA CONNECTION (CLOUDLINK R100) INTERNAL ANTENNA CONNECTION (CLOUDLINK R110) INTERNAL ANTENNA CONNECTION (RV50/RV50X)
Barrier Connections Terminal Block Connections