Honeywell MX7 Tecton User manual

MX7 Tecton™ Mobile Computer
with Microsoft
®
Windows
®
Embedded CE 6.0
User’s Guide

Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this
document without prior notice, and the reader should in all cases consult HII to determine whether any syuch changes have
been made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages
resulting from the furnishing, performance, or use of this material.
HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated into another language without the prior written consent of HII.
© 2011-2016 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
Trademarks
RFTerm is a trademark or registered trademark of EMS Technologies, Inc. in the United States and/or other countries.
Microsoft®Windows®, ActiveSync®, MSN, Outlook®, the Windows logo, and Windows Media are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
Marvell®is a registered trademark of Marvell Technology Group Ltd., or its subsidiaries in the United States and other countries.
Summit Data Communications, the Laird Technologies Logo, the Summit logo, and “Connected. No Matter What” are trade-
marks of Laird Technologies, Inc.
The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc.
microSD and microSDHC are trademarks or registered trademarks of SD-3C, LLC in the United States and/or other countries.”
Symbol®is a registered trademark of Symbol Technologies. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M
Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.
Hand Held is a trademark of Hand Held Products, Inc., a subsidiary of Honeywell International.
RAM®and RAM Mount™ are both trademarks of National Products Inc., 1205 S. Orr Street, Seattle, WA 98108.
Wavelink®, the Wavelink logo and tagline, Wavelink Studio™, Avalanche Management Console™, Mobile Manager™, Mobile
Manager Enterprise™ are trademarks of Wavelink Corporation, Kirkland.
Wi-Fi®, WMM®, Wi-Fi Mutlimedia™, Wi-Fi Protected Access®, WPA™, WPA2™ and the Wi-Fi CERTIFIED™ logo are trade-
marks or registered trademarks of Wi-Fi Alliance.
Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies
and are the property of their respective owners.
Patents
For patent information, please refer to www.hsmpats.com.

i
Chapter 1 - MX7 Tecton Agency Compliance
Laser Warnings....................................................................................................................1-1
Laser Label Location............................................................................................................1-1
Laser Safety Statement .......................................................................................................1-1
Model Number and Serial Number Labels...........................................................................1-1
FCC Part 15 Statement........................................................................................................1-1
FCC 5GHz Statement ..........................................................................................................1-2
Canadian Compliance..........................................................................................................1-2
CE Mark ...............................................................................................................................1-3
RF Notices ...........................................................................................................................1-3
RF Safety Notice..................................................................................................................1-3
Bluetooth..............................................................................................................................1-3
Honeywell Scanning & Mobility Product Environmental Information....................................1-3
Dealer License - Republic of Singapore ..............................................................................1-3
Vehicle Power Supply Connection Safety Statement ..........................................................1-3
Chapter 2 - Getting Started
Overview ..............................................................................................................................2-1
About this Guide ..................................................................................................................2-1
Out of the Box ......................................................................................................................2-1
Initial Setup for MX7 Tecton.................................................................................................2-2
Hardware Setup .............................................................................................................2-2
Software Setup...............................................................................................................2-2
Components.........................................................................................................................2-3
Front View......................................................................................................................2-3
Back View ......................................................................................................................2-4
I/O Port and Cables........................................................................................................2-4
Scanner / Imager Aperture.............................................................................................2-5
Handle............................................................................................................................2-6
Handstrap.......................................................................................................................2-6
Keypads .........................................................................................................................2-7
End User License Agreement (EULA) .................................................................................2-8
Rebooting the MX7 Tecton ..................................................................................................2-9
Suspend / Resume.........................................................................................................2-9
Warmboot.......................................................................................................................2-9
Restart............................................................................................................................2-9
Inserting and Removing the Battery Pack............................................................................2-9
Inserting the Battery.....................................................................................................2-10
Removing the Battery...................................................................................................2-10
Charging the Main Battery .................................................................................................2-10
LEDs and Indicators...........................................................................................................2-11
System Status LED......................................................................................................2-11
Alpha mode Status LED ..............................................................................................2-11
Scan Status Indicator...................................................................................................2-11
Toggle Vibrate Indicator...............................................................................................2-11
Table of Contents

ii
Tapping the Touch Screen with a Stylus ...........................................................................2-12
Calibrating the Touch Screen............................................................................................2-12
Setting the Display Backlight Timer................................................................................... 2-12
Applying the Touch Screen Protective Film....................................................................... 2-12
Setting the Date and Time Zone........................................................................................2-13
Set Power Scheme Timers................................................................................................ 2-13
Battery Power Scheme................................................................................................ 2-13
AC Power Scheme ......................................................................................................2-13
Setting Speaker Volume.................................................................................................... 2-13
Using the Keypad ........................................................................................................ 2-14
Using a Control Panel.................................................................................................. 2-14
Setting Terminal Emulation Parameters............................................................................ 2-15
Using the AppLock Switchpad...........................................................................................2-15
Using the Keypad ........................................................................................................ 2-15
Using the Touch Screen ..............................................................................................2-15
Using the Input Panel / Virtual Keyboard...........................................................................2-16
Connecting to Bluetooth Devices ...................................................................................... 2-17
Taskbar Bluetooth Indicator......................................................................................... 2-17
Attaching the Handstrap....................................................................................................2-18
Attaching the Trigger Handle.............................................................................................2-19
Handle with Four Screws............................................................................................. 2-19
Handle with Two Screws .............................................................................................2-20
Assembling the Carry Case............................................................................................... 2-21
Connecting a Headset Cable............................................................................................. 2-21
Adjusting Headset / Microphone and Securing the Cable ...........................................2-22
Connecting the USB Client and Power Cable ...................................................................2-23
Connecting the Serial and Power Cable............................................................................2-23
Assembling the AC/DC Power Supply...............................................................................2-24
Startup Help....................................................................................................................... 2-25
Chapter 3 - Hardware Configuration
System Hardware................................................................................................................ 3-1
802.11 a/b/g Wireless Client..........................................................................................3-1
Central Processing Unit.................................................................................................3-1
System Memory............................................................................................................. 3-1
Internal SD Card Slot..................................................................................................... 3-1
Video Subsystem........................................................................................................... 3-2
Power Supply................................................................................................................. 3-2
COM Ports..................................................................................................................... 3-2
RS232 Serial Port..........................................................................................................3-2
USB Client Port..............................................................................................................3-2
Audio Connection .......................................................................................................... 3-2
Audio Support................................................................................................................ 3-3
Scanner / Imager Port.................................................................................................... 3-3
Bluetooth EZPair (or LXEZ Pairing)...............................................................................3-3
Keypads.........................................................................................................................3-4
Display........................................................................................................................... 3-6
Status LEDs................................................................................................................... 3-6

iii
Cold Storage Configuration ...........................................................................................3-6
Chapter 4 - Power Modes and Batteries
Power Modes....................................................................................................................... 4-1
On Mode........................................................................................................................ 4-1
Suspend Mode............................................................................................................... 4-1
Off Mode........................................................................................................................4-1
Batteries ..............................................................................................................................4-2
Checking Battery Status ................................................................................................4-2
Main Battery Pack..........................................................................................................4-2
Battery Hotswapping...................................................................................................... 4-2
Low Battery Warning .....................................................................................................4-2
Super-cap Internal Battery.............................................................................................4-2
Handling Batteries Safely ..............................................................................................4-3
Chapter 5 - Software Configuration
Introduction.......................................................................................................................... 5-1
Operating System................................................................................................................5-1
Windows CE Operating System ..........................................................................................5-1
General Windows CE Keyboard Shortcuts....................................................................5-1
Warmboot ...................................................................................................................... 5-2
Clearing Persistent Storage / Reset to Default Settings................................................ 5-2
Folders Copied at Startup..............................................................................................5-2
Saving Changes to the Registry ....................................................................................5-2
Software Load ..................................................................................................................... 5-3
Software Applications .................................................................................................... 5-3
ActiveSync.....................................................................................................................5-3
Bluetooth (Optional)....................................................................................................... 5-3
RFTerm (Optional)......................................................................................................... 5-3
Avalanche...................................................................................................................... 5-3
Software Development .................................................................................................. 5-3
Utilities ........................................................................................................................... 5-3
MX7 Tecton Command-line Utilities .............................................................................. 5-5
Desktop ............................................................................................................................... 5-6
Desktop Icons................................................................................................................ 5-6
Taskbar.......................................................................................................................... 5-6
My Device Folders.........................................................................................................5-7
Wavelink Avalanche Enabler (Optional) ........................................................................ 5-7
Internet Explorer ............................................................................................................ 5-7
Start Menu Program Options............................................................................................... 5-8
Communication.............................................................................................................. 5-8
Summit........................................................................................................................... 5-8
Command Prompt.......................................................................................................... 5-9
eXpress Scan ................................................................................................................ 5-9
Internet Explorer ............................................................................................................ 5-9
Microsoft WordPad ........................................................................................................ 5-9
Remote Desktop Connection......................................................................................... 5-9

iv
Settings........................................................................................................................5-10
Transcriber................................................................................................................... 5-10
Windows Explorer........................................................................................................ 5-10
Taskbar........................................................................................................................5-10
Taskbar Icons .............................................................................................................. 5-12
Upgrading the Operating System ......................................................................................5-13
Introduction.................................................................................................................. 5-13
Updates and Language Options..................................................................................5-13
Preparation .................................................................................................................. 5-13
Procedure .................................................................................................................... 5-13
Update Help................................................................................................................. 5-14
Battery State and OS Upgrade.................................................................................... 5-14
Control Panel..................................................................................................................... 5-15
About ...........................................................................................................................5-17
Accessibility ................................................................................................................. 5-18
Battery .........................................................................................................................5-19
Brightness.................................................................................................................... 5-20
Certificates...................................................................................................................5-21
Date / Time ..................................................................................................................5-22
Device Management.................................................................................................... 5-23
Dialing.......................................................................................................................... 5-24
Display.........................................................................................................................5-25
Input Panel................................................................................................................... 5-27
Internet Options ........................................................................................................... 5-28
Keyboard ..................................................................................................................... 5-31
KeyPad ........................................................................................................................ 5-32
License Viewer ............................................................................................................ 5-37
Mixer............................................................................................................................ 5-37
Mouse.......................................................................................................................... 5-39
MX7T Options.............................................................................................................. 5-40
Network and Dialup Options........................................................................................5-43
Network Capture.......................................................................................................... 5-44
Owner ..........................................................................................................................5-47
Password..................................................................................................................... 5-49
PC Connection............................................................................................................. 5-50
Peripherals................................................................................................................... 5-51
Power...........................................................................................................................5-52
Regional and Language Settings................................................................................. 5-53
Registry........................................................................................................................5-55
Remove Programs....................................................................................................... 5-56
SCU .............................................................................................................................5-56
Stylus........................................................................................................................... 5-57
System......................................................................................................................... 5-58
Volume and Sounds .................................................................................................... 5-60
Wi-Fi ............................................................................................................................5-61
Using ActiveSync............................................................................................................... 5-62
Introduction.................................................................................................................. 5-62
Initial Setup.................................................................................................................. 5-63

v
Connect via USB ......................................................................................................... 5-63
Explore.........................................................................................................................5-63
Backup Data Files using ActiveSync ...........................................................................5-63
MX7 Tecton with a Disabled Touch Screen................................................................. 5-64
Reset and Loss of Host Re-connection .......................................................................5-64
ActiveSync Help........................................................................................................... 5-64
Configuring the MX7 Tecton with HSM Connect (or LXEConnect) ................................... 5-65
Install HSM Connect....................................................................................................5-65
Using HSM Connect ....................................................................................................5-65
Chapter 6 - AppLock (Application Locking)
Introduction.......................................................................................................................... 6-1
Setup a New Device............................................................................................................6-1
Administration Mode............................................................................................................6-1
End User Mode.................................................................................................................... 6-2
Passwords ........................................................................................................................... 6-3
AppLock Password Help................................................................................................6-3
End-User Switching Technique ........................................................................................... 6-3
Using a Stylus Tap.........................................................................................................6-3
Using the Switch Key Sequence....................................................................................6-3
Hotkey (Activation hotkey)............................................................................................. 6-4
End User Internet Explorer (EUIE) ......................................................................................6-4
Application Configuration..................................................................................................... 6-5
Application .....................................................................................................................6-5
Security.......................................................................................................................... 6-9
Options ........................................................................................................................6-10
Status........................................................................................................................... 6-11
AppLock Help ....................................................................................................................6-12
AppLock Error Messages ..................................................................................................6-13
Chapter 7 - Bluetooth Configuration
Introduction.......................................................................................................................... 7-1
Initial Configuration.............................................................................................................. 7-1
Subsequent Use..................................................................................................................7-2
Bluetooth Devices................................................................................................................ 7-3
Clear Button...................................................................................................................7-3
Discover Button ............................................................................................................. 7-3
Bluetooth Device Menu..................................................................................................7-5
Settings................................................................................................................................ 7-6
Turn On Bluetooth Button..............................................................................................7-6
Options .......................................................................................................................... 7-7
Reconnect ........................................................................................................................... 7-8
Options .......................................................................................................................... 7-8
About ................................................................................................................................... 7-9
Easy Pairing and Auto-Reconnect....................................................................................... 7-9
Bluetooth Indicators........................................................................................................... 7-10
Bluetooth Bar Code Reader Setup....................................................................................7-10

vi
Introduction.................................................................................................................. 7-10
MX7 Tecton with Label ................................................................................................7-11
MX7 Tecton without Label ...........................................................................................7-11
Bluetooth Reader Beep and LED Indications....................................................................7-12
Bluetooth Printer Setup ..................................................................................................... 7-12
Chapter 8 - Data Collection Wedge
Introduction.......................................................................................................................... 8-1
Symbol or Honeywell scanner .......................................................................................8-1
Hand Held Products Imager ..........................................................................................8-1
Data Processing Overview ..................................................................................................8-2
Main..................................................................................................................................... 8-3
Continuous Scan Mode .................................................................................................8-4
COM1 .................................................................................................................................. 8-4
Notification........................................................................................................................... 8-5
Vibration......................................................................................................................... 8-5
Data Options........................................................................................................................ 8-6
Enable Code ID .............................................................................................................8-7
Symbology Settings....................................................................................................... 8-8
Symbologies ................................................................................................................ 8-13
Ctrl Char Mapping........................................................................................................8-29
Custom Identifiers........................................................................................................ 8-30
Control Code Replacement Examples......................................................................... 8-32
Bar Code Processing Examples..................................................................................8-32
Length Based Bar Code Stripping ............................................................................... 8-34
Processing......................................................................................................................... 8-36
Enable buffered key output..........................................................................................8-36
Same buffer limit.......................................................................................................... 8-36
Delay between (key) buffers........................................................................................8-36
About ................................................................................................................................. 8-37
Hat Encoding..................................................................................................................... 8-38
Chapter 9 - Enhanced Launch Utility
Introduction.......................................................................................................................... 9-1
Registry Based Launch Items..............................................................................................9-1
Launch Startup Options................................................................................................. 9-3
Script Based Launch Items..................................................................................................9-4
Enhanced Launch Utility Use......................................................................................... 9-4
File Names.....................................................................................................................9-4
Command line structure.................................................................................................9-4
Comments ..................................................................................................................... 9-5
Commands Supported by Launch .................................................................................9-6
Launch Error Messages .................................................................................................... 9-13
Example Script File............................................................................................................9-14
Chapter 10 - Enabler Installation and Configuration
Introduction........................................................................................................................ 10-1

vii
Installation ......................................................................................................................... 10-1
Installing the Enabler on Mobile Devices........................................................................... 10-1
Enabler Uninstall Process ................................................................................................. 10-2
Stop the Enabler Service................................................................................................... 10-2
Update Monitoring Overview ............................................................................................. 10-2
Mobile Device Wireless and Network Settings .................................................................. 10-2
Preparing a Device for Remote Management ...................................................................10-3
Remote Management Utility (RMU).............................................................................10-3
Wireless Configuration Application (WCA) ..................................................................10-3
User Interface.................................................................................................................... 10-4
Enabler Configuration.................................................................................................. 10-4
File Menu Options........................................................................................................10-5
Avalanche Update using File > Settings...................................................................... 10-6
Using Remote Management............................................................................................ 10-21
Using eXpress Scan........................................................................................................10-21
Creating Bar Codes ................................................................................................... 10-21
Scanning Bar Codes.................................................................................................. 10-21
Process Complete ..................................................................................................... 10-22
Chapter 11 - Wireless Network Configuration
Introduction........................................................................................................................ 11-1
Important Notes.................................................................................................................11-1
Summit Client Utility ..........................................................................................................11-1
Help ............................................................................................................................. 11-1
Summit Tray Icon.........................................................................................................11-2
Wireless Zero Config Utility and the Summit Radio.....................................................11-3
Main............................................................................................................................. 11-3
Profile........................................................................................................................... 11-6
Status........................................................................................................................... 11-9
Diags.......................................................................................................................... 11-10
Global ........................................................................................................................ 11-11
Sign-On vs. Stored Credentials.......................................................................................11-15
Using Stored Credentials........................................................................................... 11-15
Using a Sign On Screen ............................................................................................ 11-15
Windows Certificate Store vs. Certs Path........................................................................11-17
User Certificates ........................................................................................................ 11-17
Root CA Certificates ..................................................................................................11-17
Configuring Profiles ......................................................................................................... 11-19
No Security ................................................................................................................ 11-19
WEP........................................................................................................................... 11-20
LEAP.......................................................................................................................... 11-21
PEAP/MSCHAP......................................................................................................... 11-22
PEAP/GTC................................................................................................................. 11-24
WPA/LEAP ................................................................................................................ 11-26
EAP-FAST ................................................................................................................. 11-28
EAP-TLS.................................................................................................................... 11-30
WPA PSK .................................................................................................................. 11-32
Certificates....................................................................................................................... 11-33

viii
Generating a Root CA Certificate ..............................................................................11-33
Installing a Root CA Certificate..................................................................................11-36
Generating a User Certificate ....................................................................................11-37
Installing a User Certificate........................................................................................11-43
Verify Installation ....................................................................................................... 11-46
Chapter 12 - Keymaps
Introduction........................................................................................................................ 12-1
55 key Alphanumeric Keymap - Primary Delete..........................................................12-1
55 Key 5250 Alphanumeric KeyMap - Primary Delete ................................................ 12-6
55 key Alphanumeric Keymap - Primary Backspace................................................. 12-11
32 key Numeric-Alpha Keymap .................................................................................12-16
Chapter 13 - Battery Charger
Unpacking your Battery Charger .......................................................................................13-1
Introduction........................................................................................................................ 13-1
Cautions and Warnings ..................................................................................................... 13-2
Battery Charger ........................................................................................................... 13-2
Lithium-Ion Battery Pack..............................................................................................13-2
Précautions et avertissements ..........................................................................................13-2
Chargeur de la batterie................................................................................................ 13-2
Bloc de batteries au lithium-ion.................................................................................... 13-2
Front View ......................................................................................................................... 13-3
Top View............................................................................................................................ 13-4
Installation ......................................................................................................................... 13-5
Assemble the Power Supply........................................................................................13-5
Setup ........................................................................................................................... 13-5
Mounting............................................................................................................................ 13-6
Charging Batteries............................................................................................................. 13-7
Inserting a Battery into the Charging Pocket ............................................................... 13-7
Remove the Battery from the Charging Pocket ...........................................................13-7
Interpreting the Charging Pocket LEDs ............................................................................. 13-7
Battery Charger Help.........................................................................................................13-8
Charger Cleaning, Storage and Service............................................................................ 13-9
Cleaning....................................................................................................................... 13-9
Storage ........................................................................................................................13-9
Service......................................................................................................................... 13-9
Battery Cleaning, Storage and Service ........................................................................... 13-10
Cleaning..................................................................................................................... 13-10
Storage ...................................................................................................................... 13-10
Service....................................................................................................................... 13-10
Chapter 14 - Cradles
Unpacking your Cradles ....................................................................................................14-1
Overview............................................................................................................................ 14-1
Preparing the Cradle for Use............................................................................................. 14-1
Tethered Scanners and the MX7 Tecton Cradles ............................................................. 14-2

ix
Maintenance...................................................................................................................... 14-2
Cleaning ............................................................................................................................ 14-2
Using a Desktop Cradle.....................................................................................................14-3
Introduction.................................................................................................................. 14-3
Quick Start - Desktop Cradle....................................................................................... 14-3
Battery Charging in a Desktop Cradle ......................................................................... 14-3
Front View.................................................................................................................... 14-4
Back View.................................................................................................................... 14-5
Top View...................................................................................................................... 14-6
Desktop Mounting Footprint.........................................................................................14-6
Installing and Removing the Docking Bay Adapter Cup..............................................14-7
Assemble/Attach the AC Power Adapter.....................................................................14-8
Connecting Input/Output Cables to the Desktop Cradle..............................................14-9
Cradle LEDs ................................................................................................................ 14-9
Docking and Undocking the MX7 Tecton .................................................................. 14-10
Inserting / Removing a Spare Battery from the Desktop Cradle................................ 14-11
Desktop Cradle Help..................................................................................................14-12
Using a Passive Vehicle Cradle ...................................................................................... 14-14
Introduction................................................................................................................ 14-14
Quick Start................................................................................................................. 14-14
Components .............................................................................................................. 14-15
Installing the Cradle U-Bracket.................................................................................. 14-16
Installing the RAM Bracket ........................................................................................14-17
Using a Powered Vehicle Cradle.....................................................................................14-18
Introduction................................................................................................................ 14-18
Quick Start................................................................................................................. 14-18
Components .............................................................................................................. 14-19
Installing or Removing Vehicle Cradle Adapter Cup and Top Adapter...................... 14-21
Installing the Adapter.................................................................................................14-22
Removing the Adapter Assembly ..............................................................................14-23
RAM Bracket Mounting..............................................................................................14-24
DC/DC Power Supply Installation, Screws on Top of lid ...........................................14-26
DC/DC Power Supply Installation, Screws on Side of Lid ......................................... 14-29
Vehicle 12V Bare Wire Adapter................................................................................. 14-32
Vehicle Cradle LED ...................................................................................................14-34
Docking the MX7 Tecton in a Powered Vehicle Cradle............................................. 14-35
Removing the MX7 Tecton from a Powered Vehicle Cradle .....................................14-36
Powered Vehicle Cradle Help....................................................................................14-36
Chapter 15 - Technical Specifications
MX7 Tecton Hardware....................................................................................................... 15-1
MX7 Tecton Dimensions and Weight ................................................................................ 15-1
MX7 Tecton Environmental Specifications ........................................................................ 15-2
MX7 Tecton Network Card Specifications .........................................................................15-2
Summit 802.11 a/b/g SDIO 2.4/5.0GHz.......................................................................15-2
Bluetooth......................................................................................................................15-2
MX7 Tecton AC/DC Wall Adapter .....................................................................................15-2
Desktop Cradle..................................................................................................................15-3

x
Serial Port.................................................................................................................... 15-3
Vehicle Mounted Cradle .................................................................................................... 15-4
Serial Port.................................................................................................................... 15-4
Power Connector Port ................................................................................................. 15-5
Battery Charger .................................................................................................................15-5
Electrical ...................................................................................................................... 15-5
Temperature ................................................................................................................ 15-5
Dimensions.................................................................................................................. 15-5
Chapter 16 - Customer Support
Technical Assistance......................................................................................................... 16-1
Product Service and Repair............................................................................................... 16-1
Limited Warranty ...............................................................................................................16-1

1 - 1
1
MX7 Tecton Agency Compliance
MX7 Tecton mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation.
However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency
guidelines that follow. Read these guidelines carefully before using your MX7 Tecton.
This documentation is relevant for the following models: Tecton, TectonCS.
Laser Warnings
• Do not look into the laser’s lens.
• Do not stare directly into the laser beam.
• Do not remove the laser caution labels from the Tecton.
• Do not connect the laser bar code aperture to any other device. The laser bar code aperture is certified for use with the MX7
Tecton only.
Laser Safety Statement
This device has been tested in accordance with and complies with IEC60825-1 ed2 (2007). Complies with 21 CFR 1040.10 and
1040.11, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER PRODUCT, 1.0 mW MAX OUTPUT: 630-680nM.
Model Number and Serial Number Labels
The model (item) number and serial number for the terminal are located on labels affixed to the back of the terminal.
FCC Part 15 Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Caution: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. The battery should be disposed of
by a qualified recycler or hazardous materials handler. Do not incinerate the battery or dispose of the battery with
general waste materials.
Caution: Laser radiation when open. Read the caution labels. Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
Laser Label Location
If the following label is attached to your product, it indicates
the product contains an engine with a laser aimer:
!
!
AVOID EXPOSURE - LASER RADIATION IS
EMITTED FROM THIS APERTURE.
LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1.0mW - 630 - 680nm
COMPLIES WITH 21 CFR 1040.10 AND 1040.11
EN60825-1:2007 IEC60825-1:2007

1 - 2
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The
user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices. Hon-
eywell is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the
substitution or attachment of connecting cables and equipment other than those specified by Honeywell. The correction is the
responsibility of the user.
Caution: Any changes or modifications made to this equipment not expressly approved by Honeywell may void the FCC autho-
rization to operate this equipment.
FCC 5GHz Statement
LAN devices are restricted to indoor use only in the band 5150-5250 MHz. For the band 5600-5650 MHz, no operation is permit-
ted.
When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz
Frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce
the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user
of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this
device.
Canadian Compliance
This ISM device complies with Canadian RSS-210.
Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.

1 - 3
CE Mark
The CE marking indicates compliance with the following directives:
• 1995/5/EC R&TTE
• 2011/65/EU RoHS (Recast)
In addition, complies to 2006/95/EC Low Voltage Directive, when shipped with recommended power supply. European contact::
Honeywell shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE
marked and does not comply with the Low Voltage Directive.
RF Notices
RF Safety Notice
Caution:
This device was tested for typical body-worn operation. Use only Honeywell tested and approved accessories to ensure FCC
Compliance. The use of third-party accessories may not comply with FCC RF exposure compliance requirements, and should
be avoided. To comply with FCC RF exposure requirements, this device must be operated in the hand with a minimum separa-
tion distance of 2.5 cm (0.9842 inch) or more from a person's body.
Bluetooth
Honeywell Scanning & Mobility Product Environmental Information
Refer to www.honeywellaidc.com/environmental for the RoHS / REACH / WEEE information.
Dealer License - Republic of Singapore
Vehicle Power Supply Connection Safety Statement
Vehicle Power Supply Connection: If the supply connection is made directly to the battery, a 10A slow-blow fuse should be
installed in the positive lead within 5 inches (12.7 cm) of the battery positive (+) terminal.
Hand Held Products Europe BV
Nijverheidsweg 9-13
5627 BT Eindhoven
The Netherlands
This device (FCC ID: KDZLXE-MX7T and IC ID: 1995B-LXEMX7T) contains transmitter Module FCC ID: TWG-SD-
CMSD30AG and IC ID: 6616A-SDCMSD30AG.
This device does not transmit simultaneously on adjacent or non-adjacent channels.
Class II

1 - 4

2 - 1
2
Getting Started
Overview
The MX7 Tecton™ is a rugged, portable, hand-held mobile computer capable of wireless data communications. The MX7 Tec-
ton can transmit information using an 802.11 network card and it can store information for later transmission through an RS232
or USB port. The MX7CS (Cold Storage) device functions normally in various temperature ranges.
The MX7 Tecton is vertically oriented and features backlighting for the display. Keypads are available in 55-key alphanumeric
and 32-key numeric-alpha versions.
This device can be scaled from a limited function batch computer to an integrated wireless scanning computer. A trigger handle
is available as an accessory.
The stylus attached to the hand strap is used to assist in entering data and configuring the device. Protective film for the touch
screen is available as an accessory.
The MX7 Tecton is powered by a 2200 mAh Lithium-Ion main battery pack and an internal Super-capacitor (Super-cap) battery.
Note: Contact Technical Assistance (page 16-1) for upgrade availability if your application or control panels are not the same
as the application or control panels presented in this guide.
About this Guide
This MX7 Tecton User’s Guide provides instruction for the system administrator to follow when configuring a MX7 Tecton. Also
included are setup and use instructions for the MX7 Tecton Battery Charger, Desktop Cradle, Passive Vehicle Mounted Cradle,
and Powered Vehicle Mounted Cradle.
Note: The MX7 Tecton may have a Microsoft Windows CE 6 or Microsoft Windows Mobile 6.5 operating system. This guide is
for the MX7 Tecton with a Windows CE 6 operating system
Out of the Box
After you open the shipping carton verify it contains the following items:
•MX7Tecton
• Rechargeable battery
• Hand Strap (attached to the MX7 Tecton)
• Quick Start Guide and Regulatory Sheet
If you ordered accessories for the MX7 Tecton, verify they are also included with the order. Keep the original packaging material
in the event the MX7 Tecton should need to be returned for service. For details, see Product Service and Repair (page 16-1)

2 - 2
Initial Setup for MX7 Tecton
Following are steps you might take when setting up a new MX7 Tecton. Follow the links for further instruction for each step. Con-
tact Technical Assistance (page 16-1) if you need additional help.
Note: Installing or removing accessories should be performed on a clean, well-lit surface. When necessary, protect the work
surface, the MX7 Tecton, and components from electrostatic discharge.
Hardware Setup
1. Connect accessories e.g., hand strap (if necessary), trigger handle, etc.
2. Provide a power source:
• Insert a fully charged main battery.
• Connect a power cable (USB/Power or Serial/Power).
• Place the MX7 Tecton in a powered desktop or vehicle mounted cradle.
3. Press the Power key.
Software Setup
Hardware setup should be completed before starting software setup.
1. Calibrate Touch display.
2. Set Date and Time Zone.
3. Set Power Timers.
4. Set Speaker Volume.
5. Pair Bluetooth devices.
6. Set Wireless client parameters.
7. Set terminal emulation parameters.
8. Set AppLock parameters.
9. Set DCWedge parameters.

2 - 3
Components
Front View
1. Scanner/Imager Aperture
2. Speaker
3. System Status LED
4. Scan Button
5. Orange Key (Sticky Key)
6. Blue Key (Sticky Key)
7. Scan Status LED
8. Cable Port
9. On / Off Button
10. Alpha Lock LED (32 Key
keypad only)
Diamond Keys
55-key Keypad 32-key Keypad

2 - 4
Back View
I/O Port and Cables
Input / Output Port (I/O)
Cable: Multipurpose RS232 and Power (MX7055CABLE)
Cable: Multipurpose USB and Power (MX7052CABLE)
1. Scanner/Imager Aperture
2. Stylus and Stylus Pocket
3. Trigger Handle Attach Points
4. Main Battery
5. Battery Fastener
6. Cable Port