Honeywell 3MP User manual

Document 800-16354 Rev. A
Honeywell
3MP&2MP
IR Vari-Focal Bullet Camera
User’s Manual

Honeywell
i
Contents
1 Overview.................................................................................................................................... 1
Introduction ................................................................................................................................. 1
Features ..................................................................................................................................... 1
Minimum System Requirements.................................................................................................. 2
2 Package Contents ..................................................................................................................... 4
3 Connections .............................................................................................................................. 5
4 Hardware Installation ................................................................................................................ 7
5 Preparation................................................................................................................................ 8
Search and Set up by IPWizard II................................................................................................ 8
Search.................................................................................................................................. 8
View ..................................................................................................................................... 9
LAN .................................................................................................................................... 10
Wireless ............................................................................................................................. 11
UPnP of Windows
®
XP or 7....................................................................................................... 11
Install the Device behind a NAT Router ..................................................................................... 12
Logging in as an User ............................................................................................................... 14
Logging in as an Administrator .................................................................................................. 14
6 Operating the Network Camera .............................................................................................. 15
Monitor Image Section .............................................................................................................. 15
Video Profile ............................................................................................................................. 15
Streaming Protocol ................................................................................................................... 16
Language.................................................................................................................................. 16
2-Way Audio ............................................................................................................................. 16
Full Screen ............................................................................................................................... 17
PTZ Control .............................................................................................................................. 17
ActiveX Control ......................................................................................................................... 18
Digital Zoom ....................................................................................................................... 19
Snapshot ............................................................................................................................ 20
Record................................................................................................................................ 20
Volume ............................................................................................................................... 21
About.................................................................................................................................. 21
7 Administrating the Device ...................................................................................................... 22
Setting ...................................................................................................................................... 22
Network: Configure Network settings .................................................................................. 22

Honeywell
ii
Camera: Adjust Camera Parameters................................................................................... 32
System: Configure and Maintain System............................................................................. 38
Video: Configure OSD, Overlay, Profile, ROI and AOI ......................................................... 42
Audio: Audio Parameters .................................................................................................... 48
User: Manage User Name, Password and Login Privilege................................................... 49
Protocol: ............................................................................................................................. 50
E-Mail: Setup E-Mail Configuration...................................................................................... 51
Event Detection: ................................................................................................................. 52
Storage: Status and Configuration of SAMBA Server .......................................................... 54
Continuous Recording: ....................................................................................................... 55
Recording List: Files List inside the SAMBA server ............................................................. 56
Event Server: Setup FTP/TCP/HTTP/SAMBA Server Configuration .................................... 56
Event Schedule: Configure the Event Schedule .................................................................. 60
8 Appendix A: Alarm I/O Connector .......................................................................................... 66
9 Appendix B: Troubleshooting & Frequently Asked Questions............................................. 68
10 Appendix C: PING IP Address ................................................................................................ 72
11 Appendix D: Bandwidth Estimation ....................................................................................... 74
12 Appendix E: Specifications .................................................................................................... 75
13 Appendix F: Configure Port Forwarding Manually ................................................................ 78
14 Appendix G: Power Line Frequency ...................................................................................... 81

Honeywell
iii
OWNER'S RECORD
The model and serial numbers are located at the bottom of device. Record these numbers
in the spaces provided below. Refer to these numbers whenever you call upon your dealer
regarding this product.
Model No. HICC-P-3100IRV / HICC-P-2100IRV
Serial No : ____________________
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
For AC Adaptor to avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
Notice: The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
For customers in the U.S.A.
This equipment has been tested and found to comply with the limits for a digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
The shielded interface cable recommended in this manual must be used with this
equipment in order to comply with the limits for a digital device pursuant to Subpart B of
Part 15 of FCC Rules.
Declaration of Conformity
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:

Honeywell
iv
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to the antenna or the device
could result in the device exceeding the RF exposure requirements and void user’s
authority to operate the device.
NOTICE TO USERS
© 2012~16 All rights reserved. This manual or the software described herein, in whole or in
part, may not be reproduced, translated or reduced to any machine readable form without
prior written approval.
WE PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE
OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY
DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE OR
SUCH OTHER INFORMATION. IN NO EVENT SHALL WE BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON
TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH
THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR
THE USE THEREOF.
We reserve the right to make any modification to this manual or the information contained
herein at any time without notice. The software described herein may also be governed by
the terms of a separate user license agreement.

Honeywell
1
1 Overview
The user’s guide explains how to operate this camera from a computer. User should read
this manual completely and carefully before you operate the device.
Introduction
This camera is an inexpensive and fully scalable surveillance device. Because the Network
Cameras can be plugged into your existing local area network (LAN), you will potentially
save thousands of dollars from unnecessary cabling.
The device is accessible via the LAN or Internet connection. Connect your device directly
to a local area network or xDSL modem, and with web browser you get instant, on demand
video streams. Within minutes you can set up the device to capture a video sequence to a
PC. The live video can be uploaded to a website for the world to see.
Features
•3Mega-pixel Sony Exmor™ image sensor; 2Mega-pixel image sensor
•3M: 3 / 2 MEGA mode selectable; 2M: 2M / 1080p+D1 mode selectable
•30fps real-time in all resolutions
•ONVIF compliant
•Camera tampering and audio detection
•Gigabit 1000Base-T Ethernet
•Weather-proof enclosure
•24pcs IR LED, over 20m IR distance
•Day and night function with ICR
•Easy installation with setup wizard (IP Wizard II)

Overview
2
•UPnP device discovery and NAT router transversal for easy installation
•Dynamic IP Service, DIPS®, to search your IP camera from Internet easily
•H.264, MPEG4, MJPEG triple compression simultaneously
•8- or 12-profile encoder simultaneously by 3M or 2M mode
•UDP / TCP / HTTP / HTTPS protocols selectable
•Digital zoom
•Event and Continuous recording to SAMBA server
•External microphone input
•Audio line out
•Two-way audio
•Composited video out
•Intelligent motion detection up to 10 zones
•Voice alerting while event triggered
•Privacy masks
•3D noise reduction to improve picture quality at low lux.
•Digital WDR to provide clear images even under back light circumstances
•Image transmission using an FTP or e-mail for event
•Digital sensor input and alarm output
•RS485 interface for PT scanner control
•DDNS and PPPoE
•On-line firmware upgrade
•IEEE 802.3af PoE support
Minimum System Requirements
•Microsoft Internet Explorer 8.0, 9.0
•Microsoft Media Player 11.0 or later (to playback recorded file)
•VGA Monitor resolution 1280 x 1024 or higher

Honeywell
3
•Intel Core 2 Duo E8600(3.33GHz) or faster
•Memory Size: 2GB or more
•Windows XP, 7

Package Contents
4
2 Package Contents
User can find the following items in the package:
Item Descriptions
1. IR Network Camera is the main
element of the product.
2. Switching Power Supply Convert
AC/DC 24V to DC 12V for camera
3. User’s Manual CD provides
installation software, application
program, important information and
instructions for operating the Network
Camera.
4. Quick Installation Guide provides
important information and instructions
for installing this device.
5. Certificate.
If any of the above items are missing, please contact your dealer immediately.
Note: Using a power supply with a different voltage than the one included with the Network
Camera will cause damage and void the warranty for this product.
The unit requires Service Personnel to conduct the installation and verify the power source
complies with Limited Power Source.

Honeywell
5
3 Connections
1. RJ45 LAN socket: Connect to PC or Hub/Switch.
It’s for connections to 10Base-T Ethernet, 100Base-TX, or 1000Base-TX Ethernet cabling.
This Ethernet port built N-Way protocol can detect or negotiate the transmission speed of
the network automatically. Please use Category 5 or better cable to connect the Network
Camera to an Ethernet network switch or hub.
In the LAN socket, there are two LEDs embedded:
LAN LED (green color)
This LED will be flashing while network accessing via Ethernet.
Power LED (orange color)
This LED is used to indicate whether power is on or not.
2. RS-485: Connect to a local keyboard controller.

Connections
6
DI/ DO: Connect to sensor in and alarm out devices
Cable for I/O connectors:
Name
Number
Function
12VDC 1 DC 12V (50mA maximum)
DI 2 Digital signal input
GND 3 GND
DO
4
Digital signal output
485+ 5 RS485 data +
485- 6 RS485 data -
3. Factory Default Reset
This button is used to restore the all factory default settings. Sometimes restarting the
device will make the system back to a normal state. However, if the system still got
problems after restart, user can restore the factory default settings.
Restore the device:
i. While the Camera is ready and then press the button down continuously.
ii. Hold the button at least 5 seconds and release it. Then the device has been
restored to default settings and reboot again.
Note: Restoring the factory default setting will lose the all previous settings included IP
address forever. User needs to run the IPWizard II program to search the device and
configure it to let the device work properly again.
4. DC-in Jack
The input power is 12VDC.
With extra switch power to 24VAC.
5. MIC in (audio in)
Connect a microphone to the network camera.
6. Line out (audio out)
Connect a loud speaker to the network camera. This function is for voice alerting and
two-way audio.
7. Video out (BNC connector)
The Network Camera also provides composite video output. The video output function is
only for easy installation to check view angle and focus. The output is not a Mega-pixel
resolution. Furthermore, the video output is off by default. To turn on video, please refer to
Setting\Camera\Picture chapter.

Honeywell
7
4 Hardware Installation
1. Fix the included stand to desired location
2. Attach the Camera to the stand
3. Plug an Ethernet cable into the Camera
Connect an Ethernet cable to the LAN socket located on the camera’s rear and attach it to
the network.
4. Connect the external power supply to Camera if not powering by PoE
Connect the power adapter to the DC / AC power jack of the camera.
5. Done
Once you have installed the camera well and powered it on, the Power LED (orange) will
turn on later. Once the Power LED turned on, it means the system is booting up
successfully. Furthermore, if you have a proper network connection, and access to the
camera, the LAN LED will flash green.

Preparation
8
5 Preparation
Search and Set up by IPWizard II
When you installed the Camera on a LAN environment, you have two easy ways to search
your Cameras by IPWizard II or UPnP™ discovery. Here is the way to execute IPWizard II
to discover Camera’s IP address and set up related parameter in a Camera.
Search
When launch the IPWizard II, a searching window will pop up. IPWizard II is starting to
search Network Cameras on the LAN. The existed devices will be listed as below.

Honeywell
9
View
If IPWizard II finds network devices, View button will be available. Please select the device
you want to view and click the View button. Then you could see the video from camera
directly. Furthermore you could double click the left button of mouse to link to the network
device by browser.

Preparation
10
LAN
In case you want to change the IP related parameters of wired interface, please select the
device you want to configure and click the LAN button. Relative settings will be carried out
as below.
You could modify the relative settings of the selected device. Click “<<” button will quit the
LAN setting procedure and click “>>” button will move to next page as below.

Honeywell
11
In case, you do not want to change username and/or password, then just click “Submit”
button to perform your setting accordingly. Click “<<” button will go back to previous page.
If you like to change username and/or password of the device, just click the check button.
Then, the related fields will show up as below.
After keying in new username and password, click “Submit” button to perform your setting
accordingly. Click “<<” button will go back to previous page.
Wireless
This model does not support wireless function. Therefore, IPWizard II disables this function
automatically.
UPnP of Windows
®
XP or 7
UPnP™ is short for Universal Plug and Play, which is a networking architecture that
provides compatibility among networking equipment, software, and peripherals. This
device is an UPnP enabled device. If the operating system, Windows XP, or 7, of your PC
is UPnP enabled, the Network Camera will be very easy to be found.
Please refer to Appendix J to enable UPnP settings only if your operating system of PC is
running Windows XP.
Note: Windows 2000 does not support UPnP feature .
To discover your device, go to your Desktop and click My Network Places .

Preparation
12
Click the targeted Device. Then Internet Explorer will connect to this Network Camera
automatically.
Install the Device behind a NAT Router
Once installed, the device is accessible on your LAN. To access the device from the
Internet you must configure your broadband router to allow incoming data traffic to the
device. If the device is installed on the LAN with a router, then it may get a dynamic IP
address from the DHCP server. However, if the device wants to be accessed from the
WAN, its IP address needs to be setup as fixed IP, also the port forwarding or Virtual
Server function of router needs to be setup.
However, if your NAT router supports UPnP feature, it can be very easy to achieve NAT
traversal automatically. To do this, enable the NAT-traversal feature, which will attempt to
automatically configure the router to allow access to the camera.
Installing the device with an UPnP router on your network is an easy 3–step procedure:
1. Enable UPnP option of your NAT router
2. Enable UPnP NAT traversal option of the Network Camera (default)
3. Access your Network Camera by DIPS
1. Enable UPnP option of your NAT router
To use UPnP IGD function (NAT traversal), you need to make sure the UPnP function is
enabled in your router. Most new home routers should support this function. Some of
routers are default enable and others are not. Please check user’s manual of your NAT
router for detail.

Honeywell
13
2. Enable UPnP NAT traversal option of the Network Camera
Refer to Setting Network UPnP page for detail NAT traversal setting. Note that this
option is default enabled.
3. Access your Network Camera by DIPS
Refer to Setting System System page for detail DIPS information.
Access the device from the Internet Explorer for the first time
1. Start the web browser on the computer and type the IP address of the Camera you
want to monitor as below:
The Login Window of the Camera is prompted:
2. Type in your login name and password under “USERNAME” and “PASSWORD”
textbox.
For the first time use (default value), input the
User Name: admin
Password: admin
That’s, type in “admin” on the “USERNAME” as a default name and leave PASSWORD
textbox blank. Click “OK” button to start the main menu.
3. According your browser’s security setting, the IE Web Page may prompt the “Security
Warning” window. If so, select “Yes” to install and run the ActiveX control into your PC.
Otherwise, the system will load the ActiveX silently.

Preparation
14
4. After the ActiveX control was installed and ran, the first image will be displayed.
Logging in as an User
If you log in the Camera as an ordinary User, “Setting” function will be not accessible.
Logging in as an Administrator
If you log in the Camera as the Administrator, you can perform all the settings provided by
the device.