Honeywell HCD92534 User manual

The Honeywell HCD92534 IR bullet-style camera comes standard with IR
illumination, making it perfect for 24/7 True Day/Night surveillance. When the
ambient light drops below a user-defined threshold, the IR LEDs turn on, a
mechanical IR cut filter within the camera switches, and the camera changes from
color to black and white. Perfect color images are captured by day and clear black
and white images at night.
The 2.8-10 mm F1.3 IR corrected aspherical Vari-focal Auto Iris lens offers a wide
field of view range and no focus shift when the camera switches from day to night
mode. Digital Noise Reduction (DNR) removes noise artifacts, improving the
performance of motion detection and typically giving end users the ability to record
for longer periods using their existing DVR unit. Digital Slow Shutter (DSS)
technology improves the light sensitivity of the camera and extends its usable
range.
The HCD92534 is easy to install and set up. Externally accessible screw gears
adjust the field of view and the focus of the 2.8-10 mm lens. A bottom mounted
porthole provides access to the onscreen display menu and IR power adjustment.
The screw-tightened mounting bracket makes it difficult to knock the camera out of
place. Adjust the camera position, then lock it down with the hexagonal bolts. The
HCD92534 has concealed wiring so the wires cannot be cut or the camera
disconnected or tampered with.
For easy installation, indoors or out, the HCD92534 mounts in minutes to a wall or
ceiling. A mounting plate provides ease of installation onto electrical boxes.
Market Opportunities
The HCD92534 is a surveillance solution designed for object recognition that is
required in locations where low light and variable light conditions exist. Setup is
quick and easy and can be customized with on-screen displays and preset modes.
This provides optimum performance for both indoor and outdoor applications
including lobbies, atriums, vestibules, gated entrances, foyers, loading docks, and
driveways.
Features
www.honeywellvideo.com
HCD92534
• Discreet, bullet-style camera with
switchable IR cut filter and 49
IR LEDs
• 2.8 – 10 mm, F1.3 Vari-focal Auto Iris
IR corrected lens with external
adjustments for zoom and focus
• High Resolution Color: 530 TVL -
1/3” Sony Super HAD CCD
• Digital Noise Reduction technology
for noise free images
• On Screen Display menu for quick
setup of camera
• Four position day/night threshold
setting to accommodate the
switching on of the IR LEDs under
different ambient lighting conditions
• One power connection self-
configures to 12 VDC or 24 VAC with
transient surge protection
• Privacy Image Masking - Four
programmable zones
IR BULLET CAMERA

HCD92534
L/HCD92534/D
May 2007
© 2007 Honeywell International Inc.
Honeywell Security
Honeywell Video Systems
2700 Blankenbaker Pkwy, Suite 150
Louisville, KY 40299
1.800.796.CCTV
www.honeywell.com
www.honeywellvideo.com
SPECIFICATIONS
Ordering
HCD92534 1/3” CCD IR Bullet Camera, TDN, 530 TVL, 2.8-10 mm, 49 IR LED, NTSC
HCD92534X 1/3” CCD IR Bullet Camera, TDN, 530 TVL, 2.8-10 mm, 49 IR LED, PAL
NOTE: Honeywell reserves the right, without notification, to make changes in product design or specifications.
Video
Video Standard NTSC or PAL
Scanning System 525/60 lines (NTSC)
625/50 lines (PAL)
Image Sensor 1/3” Sony Interline CCD sensor
Number of Pixels
(H x V)
HCD92534: 768 x 494 (NTSC)
HCD92534X: 752 x 582 (PAL)
Minimum Illumination 0 lux, operates in complete darkness
Horizontal Resolution >530 TVL
Video Output 1.0 Vp-p @ 75 Ohms
Sync System 12 VDC: Internal
24 VAC: (Internal or Line lock)
S/N Ratio 50 dB or more (AGC off)
Auto Gain Control Off/On, selectable
ALC Adjustable level control
Automatic Electronic
Shutter
1/60–1/100,000 sec (NTSC)
1/50–1/100,000 sec (PAL)
Lens Type 2.8 – 10.0 mm Vari-focal Auto Iris, IR corrected
F1.3
Horizontal Field of
View 99°–27°
White Balance ATW/AWC/Manual
Line Lock Phase
Adjustment +/- 180 º adjustable line lock vertical phase
BLC Off/On, selectable
Gamma 0.45
IR LEDs 850 nm, 49 LEDs
IR Illumination
Distance
75 ft (24 m) – 100 ft (30 m), depending on scene
reflectivity
DNR High/Medium/Low
DSS 2X~128X
Electrical
Input Voltage 12 VDC/24 VAC
Input Range 11–16 VDC, 17–28 VAC
Surge Suppression 1.5 kW transient
Power Consumption 15 W (max) with IR LEDs on
Environmental
Temperature Operating: -13°F to 122°F (-25°C to 50°C)
Storage: -35°F to 140°F (-35°C to 60°C)
Relative Humidity 0% to 85%, non-condensing
Rating IP66
Mechanical
Dimensions See Diagram
Weight 2.8 lb (1.27 kg)
Construction
Housing: Brushed and anodized aluminum with
sunshield
Finish: Brushed and anodized aluminum
Mounting Plate Connection to 4S junction box
Connector
Main Video Output: BNC connector
Aux Video Output: 2-pin connector for video test
cable
Power Input: Tinned leads
Accessories
Transformers
HPT2420 24 VAC, 20 VA Class 2 plug-in with thermal
cut-out
HPT2440 24 VAC, 40 VA Class 2 plug-in with thermal
cut-out
Regulatory
Emissions FCC: Part 15, Class B
CE: EN 55013
Immunity CE: EN50130-4
Safety EU: 73/23/EEC LVD
Power Supplies
UL Listed Fused Smart Fused Description
HPTV2404UL HPTV2404 HPTV2404CB 4 A, 4 Output
HPTV2408UL HPTV2408 HPTV2408CB 4 A, 8 Output
HPTV2416UL HPTV2416 HPTV2416CB 8 A, 16 Output