Honeywell HD73 Series User manual

3 - Axis
3 - Axis 3 - Axis
3 - Axis
3 - Axis 3 - Axis
3 - Axis
3 - Axis
3 - Axis 3 - Axis
3 - Axis 3 - Axis
3 - Axis
4
2
5
6 7
8 9
10 11
12 13
3
14 15
16 17
1918
2120
2322
24 25
26 27
28 29
3130
3332
3534
36 37
38 39
Operation Manual
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
COLOR DOME CAMERA COLOR DOME CAMERA
HD73 Series
S
i
m
p
l
e
t
o
i
n
s
t
a
l
l
3
-
A
x
i
s
b
r
a
c
k
e
t
m
a
k
e
s
a
d
j
u
s
t
m
e
n
t
e
a
s
y
.
READ AND KEEP THIS
OPERATION MANUAL www.honeywellvideo.com
P/N:3810-0104C
Rev 0 06/03
Need Help?
Call 1.800.796.CCTV for sales, service and customer support.
www.honeywellvideo.com
Design and specifications are
subject to change without notice.
Vandal-Resistant
Dome Camera
DOWN
UP
RIGHTLEFT
SW1
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
WARNING
The manufacturer could void the user's authority to operate the equipment.
CAUTION - To prevent electric shock and risk of fire hazards:
Do NOT use power sources except for that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should abide to all local codes.
. User Information
1. SAFETY INSTRUCTIONS
2. PRECAUTIONS
3. FEATURES
4. COMPOSITION
5. INSTALLATION
5
6
7
8
9
6. CONNECTIONS
7. NAME AND FUNCTIONS
8. OPERATING CAMERA
9. SPECIFICATIONS
10. TROUBLESHOOTING
...........
..........................
................................
..........................
..........................
10
11
12
34
36
........................
...........
...............
......................
...............
Before using this camera, please read this operation manual carefully to obtain
the best result and keep this manual for future reference.
Thank you for purchasing this COLOR VIDEO CAMERA. If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
. Contents
2. PRECAUTIONS
4. COMPOSITION 5. INSTALLATION
Read Instructions
Read all of the safety and operating instructions
before using the product.
Installation
Do not place this product on an unstable cart, stand,
or table. The product may fall causing serious injury
to a child or adult, and damage to the product.
Use only with a cart or stand recommended by the
manufacturer, or sold with the product.
Mounting should follow the manufacturer's instructions,
and should use a mounting accessory recommended
by manufacturer.
Power source
This product should be operated only from the type
of power source indicated on the marking label.
If you are not sure of the type of power supplied to
your home, consult your dealer or local power
company.
Retain Instructions
Save this instructions for later use.
Cleaning
Unplug this appliance from wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
Water and Moisture.
Do not use this product near water or moisture.
(For example. near a bathtub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool,etc)
1. SAFETY INSTRUCTIONS
3. FEATURES
8. OPERATING CAMERA
10. TROUBLESHOOTING
Menu [FUNCTION] - BLC 3
Main Menu - SETUP
Operation Manual
Guide Pattern
Service Monitor Cable
Mounting Screw
Problem Solutions
Nothing appears on the
screen.
The image on the screen
is dim.
The image on the screen
is dark.
The camera is not working
properly, and the surface
of the camera is hot.
The image on the screen
flickers.
• Check that the power cord and line connection between the camera and monitor
are fixed properly.
• Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
• Is lens stained with dirt? Clean your lens with soft, clean cloth.
• Set the monitor to proper condition.
• If the camera is exposed to too strong light, change the camera position.
• Adjust the lens' focus properly.
• Adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/ Hi-z properly.
• Adjust DC Level, on the OSD menu.
• Check that you have properly connected the camera to an appropriate power source.
• Is the camera facing to direct sunlight or fluoresent lighting?
Change the camera position.
CAUTION!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Explanation of two Symbols The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of un-insulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance-
(servicing) instructions in the literature accompanying the appliance.
THE GRAPHIC SYMBOLS WITH SUPPLEMENTALMARKING ARE ON THE BOTTOM OF THE SYSTEM.
"WARNING-TOPREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE"
Handling
Do not disassemble the camera and never touch
parts inside the camera.
Be sure the ambient temperature is less than
40℃in installation intended for long term
continuous operation.
Avoid installing in a humid or dusty place.
Avoid installing in places where there are
strong magnetic fields and electric signals.
Avoid installing in places where the camera
would be subject to strong vibrations.
Never expose the camera to rain and water.
Installation and storage
Do not point the camera at the sun. This could
damage the camera whether it is operating or not.
Do not install the camera where the temperature
could exceed the allowable range.
Do not drop the camera or subject it to shocks
and vibrations to avoid possible damage.
When attaching or removing the lens, handle
with care in order to that moisture and dust do
not enter the camera.
High Sensitivity 1/3 Inch Sony Super HAD CCD
Min. Illumination (F1.2, 30 IRE) : 0.3 Lux (Color)
0.0 Lux (IR LED On)
OSD (On Screen Display)
High Performance Menus For Functions
Day & Night (ICR)
• Privacy Zone Selectable (4 Programmable Zone)
• Motion Detection Selectable (64 Programmable Zone)
• Sharpness Enhanced Adjustable
• Flickerless Selectable
• Gamma Enhanced Selectable
• BLC Zone Selectable (64 Programmable Zone)
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
• ON • OFF
• MANUAL • VIDEO • DC
• AUTO • FLK • FIXED • MANUAL
• ATW • AWB • FIXED • MANUAL
• BLC • AGC •PRIVACY
• MIRROR • GAMMA • MOTION
• CONTRAST • SHARPNESS
• CB_GAIN • CR_GAIN
• ENGLISH • KOREAN • CHINESE1 • CHINESE2 •JAPANESE
SETUP MENU
1. Press MENU button, then SETUP mode is activated.
• MAIN SETUP menu is displayed on the monitor.
3. Set details using LEFT, RIGHT button.
2. Select OSD item using UP, DOWN button.
4. Select "Exit" and then press the MENU button
to finish the SETUP (Save and Exit)
SETUP
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
OFF
DC ↙
FIXED ↙
ATW
↙
↙
ENGLISH
↙
Main Menu - CAMERA ID
Menu [SHUTTER] - SHUTTER AUTO Main Menu - LENS
1) CAMERA ID setup (default setting OFF)
①Press MENU key in ON ↙state.
(Access ID setting MODE)
②Press MENU key in CAMERA ID.
2) POSITION setup. Press POSITION ↙.
①Move the character using UP, DOWN, LEFT, RIGHT button.
②Press Menu button to confirm selection of the character.
③Press Return to go to previous screen. ID is displayed by pressing EXIT on MAIN MENU.
③Character is changed each time UP, DOWN is
pressed. (Can select up to 63 letters)
④Press MENU button in ↙to
exit from ID setup mode
⑤Press MENU button in 'C' to correct and erase
the chosen entry.
1) LENS setup
①Press LEFT or RIGHT button in LENS on
Main Menu to select the mode to
MANUAL ◀▶VIDEO ◀▶DC ↙.
2) DC LENS setup
①Press MENU button in DC ↙to display the
screen on the right side.
②Use LEFT, RIGHT button to change
BRIGHTNESS(IRIS LEVEL) value.
③Press MENU button to return to the previous screen.
LENS DC
BRIGHTNESS
↙ :RETURN
056
SHUTTER AUTO
BRIGHTNESS
↙ :RETURN
056
ID SETUP
CAMERA ID
A ↙
_
POSITION
RETURN
C
Menu [FUNCTION] - BLC 1
Menu [SHUTTER] - FIXED Mode Setup Menu [WHITE BAL.] - WHITE BALANCE Mode Setup
Main Menu - FUNCTION
FUNCTION
BLC
AGC
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
OFF
ON ↙
OFF
OFF
0.45
OFF
1) SHUTTER setup (for LENS MANUAL)
①Press LEFT or RIGHT button in SHUTTER
to select the mode to
AUTO ↙◀▶FLK ◀▶FIXED ↙
◀▶MANUAL ↙.
1) WHITE BALANCE setup
①In WHITE BAL., press LEFT, RIGHT button
to select the mode you wish to operate
ATW ◀▶AWB ◀▶FIXED ↙
◀▶MANUAL ↙.
2) FIXED ↙setup
①Can set from MODE 1 to MODE 4.
3) MANUAL ↙setup
①As shown on the lower right picture,
set Red and Blue color value temperature.
②Press MENU button in RETURN
to exit from setup mode.
2) BLC AREA ↙setup
①Use UP, DOWN, LEFT, RIGHT button
to move the AREA setup position.
②Set or release BLC AREA
using MENU button.
③Press MENU button for more than 1 second
to move to BLC AREA MODE.
1) FUNCTION ↙setup
①Press MENU button in FUNTION
to show the OSD display on the right.
2) Select item using UP, DOWN button.
1) BLC SETUP MODE
①Press MENU button in BLC ON ↙,
to display the screen on the right side.
3) Set details using LEFT, RIGHT button.
4) Click "Return" to go to MAIN SETUP
1) FIXED ↙setup (MANUAL,DC,VIDEO LENS)
①Press MENU button in FIXED ↙
to display the screen on the right side.
②Press LEFT or RIGHT button in SHUTTER.
Can be set in ([NTSC: 1/60 ~ 1/100,000]
[PAL: 1/50 ~ 1/100,000]) range.
SHUTTER FIXED
SHUTTER M : 1/60
↙ :RETURN
AWB FIXED
AWB FIXED : MODE 1
↙ :RETURN
AWB MANUAL
RED
BLUE
↙ :RETURN
113
255
BLC SETUP
BLC AREA ↙
BLC RATIO
RETURN
16
Main Menu - RESET
Menu [FUNCTION] - AGC
Menu [FUNCTION] - BLC 2
Menu [FUNCTION] - MIRROR Menu [FUNCTION] - GAMMA
Main Menu - ADJUST
Menu [FUNCTION] - PRIVACY
Menu [FUNCTION] - MOTION
Menu [FUNCTION] - MOTION AREA 1
Menu [FUNCTION] - MOTION AREA 2
OFF ON
!Setting value can be adjusted
using LEFT or RIGHT button.
!Setting Mode : DC ↙!Setting Mode : FIXED ↙
!Push the Joy stick for one second, and the OSD
appears on the screen. Move the Joy Stick up, down,
left & right to control the OSD functions.
1) BLC RATIO setup (BLC LEVEL value setup)
①Use UP,DOWN button
to move to BLC RATIO.
②Use LEFT, RIGHT button
to change BLC LEVEL value (0~63)
0:MIN , 63:MAX
③Press MENU button in RETURN
to move to FUNCTION MODE.
BLC SETUP
BLC AREA ↙
BLC RATIO
RETURN
16
1) AGC setup
①AGC default setting ON ↙
②Press MENU button in ON ↙
to display the screen on the right side.
③Use LEFT, RIGHT button
to adjust AGC GAIN value (0~255)
0:MIN , 255:MAX
④Press MENU button to return
to the previous screen.
AGC CONTROL
AGC GAIN
↙ :RETURN
095
2) MOTION AREA MODE
①You will return to MOTION AREA MODE
after "Exit" from MOTION AREA MODE.
1) MOTION AREA setup
①Use UP, DOWN, LEFT, RIGHT button
to move AREA setting position.
③Press MENU button for more than 1 second
to move to MOTION AREA MODE
②Use MENU button to set and release AREA.
2) PRIVACY details setup
①Select AREA SEL - PRIVACY 0~3.
②AREA STATE- 0~3 AREA ON/OFF
③LEFT - Change left portion of each AREA size.
④RIGHT - Change right portion of each AREA size.
⑤TOP - Change top portion of each AREA size.
⑥
BOTTOM - Change bottom portion of each AREA size.
⑦
COLOR - Change entire color of the AREA (16 COLOR)
1) PRIVACY setup
①Default setting OFF - Use LEFT,RIGHT button.
Change setup to ON ↙mode.
②After ON ↙mode setup, 4 AREA groups are
configured as displayed on the right-side picture.
③Press MENU button.
Details of each area is dsplayed.
2) BLC OSD description
①ALL CLEAR - Clear all set AREA
②ALL SET - Set all 64 BLC AREA
③RETURN - Return to BLC AREA setup mode.
④EXIT - Save AREA and return to
BLC SETUP MODE.
1) BLC AREA MODE
①Exit from BLC AREA MODE
to move to BLC SETUP MODE screen.
BLC AREA
ALL CLEAR
ALL SET
RETURN
EXET
MOTION
AREA ↙
MOTION TH.
MOTION TRACE
RETURN
037
OFF
FUNCTION
BLC
AGC
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
OFF
ON ↙
OFF
OFF
0.45
OFF
FUNCTION
BLC
AGC
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
OFF
ON ↙
OFF
OFF
0.45
OFF
FUNCTION
BLC
AGC
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
ON ↙
ON ↙
ON ↙
OFF
0.45
OFF
PRIVACY
AREA SEL
AREA STATE
LEFT
RIGHT
TOP
BOTTOM
COLOR
RETURN
AREA 0
ON
017
058
020
055
001
1) MIRROR setup
①MIRROR default setting OFF
ON setting - Use LEFT, RIGHT button.
②Left and Right side is switched
as shown on the picture.
Main Menu - LANGUAGE
1) MOTION DETECTION setup
①DEFAULT value OFF
2) AREA ↙setup
①In AREA ↙, press MENU button. (see p.29)
3) MOTION TH. Setup
①Set motion sensitivity 0(MAX)~255(MIN)
4) MOTION TRACE setup
①ON : Display motion detection AREA.
②In ON ↙, press MENU button.
③Display MOTION details.
FUNCTION
BLC
AGC
PRIVACY
MIRROR
GAMMA
MOTION
RETURN
OFF
ON ↙
OFF
OFF
0.45
OFF
1) GAMMA setup (DEFAULT 0.45)
①In FUNCTION MODE,
use UP, DOWN button to select GAMMA.
②Use LEFT, RIGHT button
to adjust GAMMA value.
(USER ◀▶0.05 ◀▶0.10 ◀▶0.15 ~ 1.0)
MOTION AREA
ALL CLEAR
ALL SET
RETURN
EXET
!Each LEVEL value can be
adjusted using LEFT, RIGHT button.
!ENGLISH ◀▶Korean ◀▶Chinese1 ◀▶ Chinese 2 ◀▶Japanese
SETUP
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
OFF
DC ↙
FIXED ↙
ATW
↙
↙
ENGLISH
↙
1) MOTION OSD description
①ALL CLEAR - Release all set AREA
②ALL SET - Set all 64 MOTION AREA.
③RETURN - Return to MOTION AREA Setup Mode.
④EXIT - Save AREA and return to MOTION SETUP MODE.
1) LANGUAGE setup
①DEFAULT value - ENGLISH
②After selecting LANGUAGE,
change setting using LEFT or RIGHT button.
③Choose the language mode you
wish to operate in.
1) RESET
①Select RESET.
Press MENU button.
The screen on the bottom appears.
②Select YES or NO.
③Select YES to reset your camera
to default factory condition
1) ADJUST setup
①Press MENU button in ADJUST.
2) CONTRAST setup
①Adjust Y-gain value (0~255)
3) SHARPNESS setup
①Adjust aperture value (0~31)
4) CB_GAIN setup
①Adjust COLOR CB_GAIN value (0~255)
5) CR_GAIN setup
①Adjust COLOR CR_GAIN value (0~255)
②Move to screen on the right side.
LOAD DEFAULT
YES
NO
ADJUST
CONTRAST
SHARPNESS
CB_GAIN
CB_GAIN
RETURN
083
12
190
205
SETUP
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
OFF
DC ↙
FIXED ↙
ATW
↙
↙
ENGLISH
↙
NTSC PAL
2:1 Interlace Transfer 1/3 Inch Super HAD CCD
768(H) x 494(V) 752(H) x 582(V)
Composite: 1.0Vp-p, 75Ω, Unbalanced
Internal Sync
More than 50dB (AGC OFF)
530 TV Lines
0.3 Lux(30IRE, AGC ON), 0 Lux(IR LED)
DC Auto IRIS Vari-focal (f=3.8~9.5mm)
Manual
1/60~1/100,000 1/50~100,000
ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual
ON / OFF
English / Korean / Chinese 1 / Chinese 2 / Japanese
Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens
Focus
Electronic Shutter
White Balance
Camera ID
Language
HD73 HD73XMODEL
9. SPECIFICATIONS
ON / OFF (Level Adjustable)
Auto (ICR)
ON / OFF (4 Programmable Zone)
ON / OFF (Horizontal)
User / 0.5 ~ 1.0 Adjustable
ON / OFF (64 Programmable Zone)
0 ~ 255 (Level Adjustable)
0 ~ 31 (Level Adjustable)
DC Iris
12VDC (10V~15V)
Max. 4.5W / 360mA
-10℃~+50℃ (Recommendation: -5℃~+40℃)
-20℃~+60℃
100 mm
Approx. 844g
BLC, AGC
Day & Night
Privacy
Mirror
Gamma
Motion Detection
Contrast
Sharpness
Applicable Lens
Supply Voltage
Power Consumption
Operating Temperature
Storage Temperature
Dome Size (Ø)
Weight
J613
J611
J604
J102
J601
J603
DOWN
UP
RIGHTLEFT
SW1
SETUP
- Push and hold MENU button 1 second
to access the setup mode.
• Select the status using the
joystick. (up, down, left, right)
Setting up the Menu
Service Monitor Connecter:
Use service monitor
connector to set camera angle
& focus when installing.
SETUP
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT
OFF
DC ↙
FIXED ↙
ATW
↙
↙
ENGLISH
↙
MENU(SET):
SET BY JOY STICK
UTP1
7. NAME AND FUNCTIONS
Tilt rotation: Adjusting the vertical angle.
Pan rotation: Adjusting the horizontal angle.
Horizontal rotation: Adjusting the horizontal position of the screen.
IR LED(3.8mm~9.5mm):850nm/ 30°(20EA), Power Consumption(4.5W)
Sensor
1
2
3
6
7
Focus handle: Focus (Far or Near)
Zoom handle: Zoom (Tele or Wide)
4
5
Camera Lay-out
5
4
3
1
2
7
6
6. CONNECTION
# 1
# 2
Video
(Yellow)
Power-12VDC
(Red)
Video Output
GND
No.
#1
#2
Function
Video Output
Power Input
Remark
1.0 Vp-p
12VDC (10V~15V), 360mA (Max)
Terminal Color
Yellow
Red
• The wire is polarized. • Use 12V DC power source.
L-Wrench
Stick the guide pattern on the wall or ceiling.
1
Adjust desired focus and scene by turning and
moving the 3-axis camera bracket by hand.
5
Drill four holes according to the guide pattern
then insert anchors into the drilled holes.
2
Draw out power / video wires to the
connecting places.
3
Put the dome cover over the base.
6
Fix the dome cover on the base by L-Wrench.
7
Fixed the camera to a celling using four screws.
4
L-Wrench
Guide Pattern
Dome Base
Dome Cover
Mounting
Screw
Ceiling
. Memo