Honeywell HZC-855NX Series User manual

OPERATION MANUAL
HZC-855NX/PXSeries
Built-inx35 ZOOM/ WDR
High ResolutionAUTO FOCUSCAMERA
READ AND KEEPTHIS OPERATIONMANUAL

-2-
Warning:
Thisequipment generatesand usesradiofrequency energy
and if notinstalled andusedproperly, I.e., instrictaccordance
withthe instruction manual, maycauseharmfulinterference
toradiocommunications. It hasbeentestedand found tocomply
withthe limitsforaClass Acomputingdevicepursuant toSubpart
Jof Part 15 of FCC Rules, whicharedesignedtoprovidereasonable
protection against suchinterferencewhenoperated inacommercial
environment.
Warning:
TO PREVENTFIREORSHOCKHAZARD, DO NOTEXPOSETHIS
APPLIANCETO RAINORMOISTURE.
CAUTION
RISKOFELECTRICSHOCK
DO NOTOPEN
CAUTION:
TOREDUCETHERISKOFELECTRIC
SHOCK, DO NOTREMOVECOVER
(ORBACK).NOUSERSERVICEABLE
PARTSINSIDE.
PREFERSERVICINGTOQUALIFIED
SERVICEPERSONNEL.
Indicateapotentiallyhazardoussituation whichifnot avoided,
mayresultinminorormoderateinjury. It mayalsobeusedto
alert against unsafepractices.

-3-
CAUTION FORSAFEOPERATION
1.Waterand Moisture
Toprevent fireorshockhazard,donot exposethiscamera
torainormoisture.
2.Servicing
Donot attempttodisassembleorrepairbyyourself.
Youmaybeexposedtodangerousvoltageorotherhazards.
Notethatallservicingisqualified servicepersonnel.
Modificationsnotapprovedbymanufacturercould
voidtheuser'sauthoritytooperatetheequipment.
3. PowerSources
Topreventelectricshocksand risk of hazards, donotuse
morethanthespecified powersource.
4.Environment
Donotinstalltoowarmortoo cold place.Recommended
operationtemperatureisbetween-5 and60
5.Sunlight
Donot pointthecameraatthesun. CCD canbedamaged.
6.Heavy Shockand Vibration
Donot drop thecameraorsubject ittoheavy shock of
vibration.
7.Installon anUnstablePlace
Donotplaceorinstallthiscameraonanunstableplace,
stand,tripod,bracket ortable.Thatmaycauseseriousinjury
topeopleordamagetoappliance.
8.Whenoperation isincorrectoramalfunction isobserved
Whileoperating, if anyabnormalcondition(strangesound,
smell orsmoke)oramalfunction(nopictures,etc.)is
observed, stopusingthecameraimmediately,turnthe
poweroff,thencontactyoursupplier.
9.Cleaning
Turnthepoweroff and wipeoff thedirtwithadrysoftcloth.
Ifitisextremelydirty,usefurniturecleanertowipeitoff.
Tocleanthelens, useablowerorlenscleaningtissue.
(availablefromanycameradealer)
10.Do notshootanysourceofbrightlight.
Iftheobjectscontainverybrightareas,brightvertical or
horizontal linesmayappearonthescreen.Thisiscalled
"smear", aPhenomenonwhichoftenoccurswithsolid
-statepickups,andisnot amalfunction.
11.DamageRequiringservice
Unplugthecamerafromthepowersourceandrefer
servicingtoqualifiedservicepersonnel underthefollowing
condition:
a.If the power-supplycordorplug is damaged.
b.If the camerahasbeenexposed torainorwater.
c. Ifliquidhasbeen spilled, orobjectshavefallen intothecamera.
d.If the cameradoesnot operatenormallybyfollowing the operating
instructions. Adjust onlythosecontrols thatarecovered bythe
operating instructionsasan improperadjustment ofothercontrols
mayresult indamage andwill often requireextensiveworkbya
qualified technician torestorethecameratoitsnormaloperation.
e.If the camerahasbeendropped orthe cabinethasbeendamaged.
f . Ifthecameraexhibitsadistinct change inperformance.
Warrantyisnotcoveredincaseofnaturaldisasterorwrong
Installation.

-4-
CONTENTS
1. Features ---------------------------------------------------------------5
2. Terms &Functions ------------------------------------------------6
5. OnScreenDisplay --------------------------------------------------10
4. CameraControlMethods -------------------------------------------8
7. Dimensions ------------------------------------------------------------22
6. Specifications ---------------------------------------------------------21
3. Installation------------------------------------------------------------7
Thank youfor usingourAutoFocusZoom Color Camera.Togetthebest
efficiency,readcarefully all instructionsin thismanualbeforeuse,and
keepthismanualfor reference.Ifyou haveany problemswith thiscamera,
contactyoursuppliertoservice.

-5-
Ideal DigitalVideo CameraforSecurity
The HZC-855NX/PX Ser. is acompact camerathatofferseasysystem
integration. Coming withthe built-inzoomlens, the usercan monitorthe
scene fromvariableanglewithout theextralens.
Withthe DSP technology,suchintelligent controls asautoiris,
and autowhitebalancearepossibletorealizecleardetailed picture.
Additionally,throughRS-232C,RS422, remoteFocus/Zoomoperations
arealsopossible, along withmanualcontrol. All thesefeaturesincluding
highlysensitive1/4-inchCCD makethe idealdigitalprocessing CCTV
cameraHZC-855NX/PX seriesmoreeffectivesurveillance.
Built-in x35Optical powerzoomlens
The HZC-855NX/PX Ser. withhighlydurablebuilt-inzoomlensoffers
autofocus, autoiris , and opticalzoomfunctionsenabling the user
tomonitorascene withclarityinanydesired angleof view.
Withthe x35opticalzoomlens, the totalzoomcan beup tox90 with
x2.5digitalzoomprocessing.
High Resolution &SensitivitySONYCCD
The chassisfeaturesahighlysensitive1/4-inchCCD pickup with
approximately380,000 effectivepixels minimizing residualimage
and geometric distortion. All imagesarereproduced withahigh
horizontalresolution of 530 TVlinesforfine detail.
High SensitivitywithIntegration and removal ofIRfilter
HZC-855NX/PX Ser. hasthe increased light sensitivityto0.0005lx
(510 fields, IRCut FilterON)through field(frame)integration
technology. WithIntegration and removalofIR cutfiltermakemore
effectivesurveillancethough low light condition.(HZC-855NX/PX : less
than 0.00001lx)
1. Features
PrivacyZoneMasking
HZC-855NX/PX Ser. maskthe unwanted viewforprivacyprotection
up to8zones. PrivacyZone operatewithzoomin/out andit increases
the effect of privacyprotection.
RemoteControl through RS232C,RS422 Interface
Remotecontroloperationsarepossiblethrough RS232C/RS422
interfaceforFocus, Zoomcontroland variousfunctions.
AI / FuzzyControl CircuitwithDSP
AdvancedDSP technologyautomaticallyadjustsoperationssuchas
Iris , WhiteBalanceflexiblyadapting toenvironmentalconditions.
Auto Iris :theiris isadjusted sothatvisualoutput is keptatafixed
level,evenif brightness ofthe surrounding changes.
Auto WhiteBalance :coloradjustment according tothecolor
temperatureofthe light sourceilluminating the subject.
whitebalancecan be obtained even withfluorescent
lights, halogen lampsoroutdoor.
WDR (WideDynamicRange)
This is the technologyusing dualshuttersfrombothdarkand bright
areastobeenhancedand displayed vividvideoimage. Whilea
conventionalimage showswhiteclipcaused bythe bright spot, WDR
overcomesand solvesthe obstacleof thewhiteclipproblem.

-6-
2. Terms&Functions
TELE(UP) BUTTON
NEAR(+)BUTTON
FAR(-) BUTTON
MENU BUTTON
WIDE(DOWN)BUTTON
POWERINPUTTERMINAL
CAMERACONTROL CONNECTOR
VIDEOOUTPUT
S-VIDEOOUTPUT
POWERONLAMP
Thisistheoutputterminal
forcompositevideosignal.
Thisistheoutputterminal
forseparateY/Csignal.
InpowerONstate,
thisLEDisON.
Thisisthe14pinconnectorforexternal
cameracontrols.
(Referto4.CAMERACONTROLMETHODS)
DC 12V
(Pleaseuseaspecifiedadaptor)
SVIDEO
VIDEO

-7-
*CABLEDESCRIPTION
1.KEY1
3.ZOOM
5.MENU
7.GND
9.R+/NC
11.T+/TD
13.EXT_VD
2.KEY2
4.FOCUS
6.COM
8.GND
10.R-/RD
12.T-/GND
14.GND
(RED)
(GREEN)
(WHITE)
(BLACK )
(BROWN)
(VIOLET )
(WHITE)
(YELLOW)
(BLUE)
(ORANGE)
(BLACK )
(PINK)
(GRAY)
(BLACK)
3. Installation
3.1Check allaccessorieswith enclosedpackage.
-HZC-855NX/PXSer.SET
-14PINCONNECTIONCABLE(150mm)
-OPERATIONMANUAL
HZC-855NX/PXSer. 14 PINCABLE* OPERATIONMANUAL

-8-
4.1RemoteControlusingforHardwiredconnection (Connectorpin3,4,5,6)
4. CameraControlMethods
4.2RemoteControlusingforRS-232C connection (Connectorpin 10,11,12 )
ConnecttoSerialPORT
(COM1orCOM2)
14PCable
14PCable
10
11
12
RD(TxD)
TD(RxD)
GND
14PCable
Serial Cable
Serial Cable
(9PinD-Sub )
2
RD
3
TD
5
SG
3
4
5
ZOOM
FOCUS
MENU
14PCableController
6COM
Relay
Relay
Relay
TELE(-)
WIDE(+)
NEAR(+)
FAR (-)
MENU ON

-9-
4.3.RemoteControlusing forRS-422/485connection (Connectorpin9,10,11,12 )--------OPTION
ConnecttoSerialPORT
(COM1orCOM2)
14PCable
Serial Cable
10
11
12
RD(TxD)
TD(RxD)
GND
14PCable
Serial Cable
(9PinD-Sub )
2
RD
3
TD
5
SG
485Converter
9
10
11
R +
R-
T+
14PCable
RS-485Converter
T+
T-
R+
12 T-
R-
422
9
10
11
R +
R-
T+
14PCable
RS-485Converter
TRxD+
TRxD-
12 T-
485

-10-
5. OnScreen Display
<Fig5-1. OperatingOSDdisplayposition>
5.1HowtodisplayOperatingOSD
a.Pressing the MENU keysoftlyconfirmcurrent Operating OSD.
Itis disappeared aboutfivesecondslaterif therearenootherkeyactions.
b.When it zoominorout pressing TELE(up)orWIDE(down)key,
wholeOperating OSD is displayed and then disappeared.
Press NEAR(+),FAR(-) key,onlyupperpartof Operating OSD
(fordisplaying cameramode )is displayedand thendisappeared.
(Itis forchecking current wholecameramode and zoomposition )
c.Eventhough Operating OSD is disappeared,
it keepdisplaying ID inlowerpartof screen.
Inordertodo notdisplayID,one method is tochangeEEPROMdata
of Camera,theotheris touseexternalcommunication through RS-232C.
d.Using RS-232C communication, change displayposition ofID;
BottomRight -> Top Left-> Top Right -> Non display.
*IfdisplayOperating OSD is not needed byspecialpurpose
likeusing externaltext overlayboard, it can beOFF modeatall times
through externalcommunication controlasRS232C. <Table5-1.Operating OSDdescription>
② ③,④⑥
⑦
⑧ ⑧
⑧
⑤
⑥
①
②
④
NTSC:1/60
③
x35
⑦
⑧
Dx90
>> TELE
<< WIDE
⑤
AWB AutoWBmode
TITLE DISPLAY setasTITLE
OSD Format DESCRIPTION FUNCTION
FocusMode Non display
MF
AutoMode
Manual/ OneshotMode
BackLight Backlight OFF
Backlight ON
Non display
Non display
BL
Flickerless FlickerlessOFF
FlickerlessON
Non display
FL
WBMODE
AutoTracking WBmode
IndoorPreset (3200°K)
OutdoorPreset(5400°K)
ManualWBmode
ShutterSpeed 1/ 125
.
.
1/ 50,000 9variablesteps
Non display
IN
OUT
MWB
NightMode NightshotOFF
Non display
NightshotONIR
One PushmodeAWC
OpticalZoom
DigitalZoom
zoomIN
zoomOUT
ZOOM
DISPLAY
CAMERA
ID/TITLE
Non display
ID: 002
IncasethatID is 0
IncasethatID is 1~255

-11-
5.2OSDSETUPMENUStructure
SETUP
MENU LENSMODE
AEMODE
WBMODE
NIGHTSHOT
MODE
BLC/WDR
MODE
PZM
SETTING
CAMERA ID
SETTING
SPECIAL
FUNCTION
FACTORY
DEFAULT
ZOOMSPEED
STARTZOOM
END ZOOM
E-ZOOM
AFMODE
O.RESET
O.AFTIME
AFSENS.
MIN. DIST.
1~ 10
x1~ x34
X35 ~ x90
ON/OFF
ONESHOT/MANUAL..
ON/OFF
1~ 10
HIGH/ LOW/AFSENS
1cm~ INF. MODE
LOWSHUTTER
HIGH SHUTTER
IRIS
GAIN
BRIGHTNESS
MAXGAIN
MAXFIELDS
AUTO/SHTFIX/IRIS...
2FLDS~ 510 FIELDS
1/60 ~1/50000
CLOSE ~ F1.6
8dB ~ 38dB
0~ 99
8dB ~ 38dB
OFF ~ 510FIELDS
MODE
CONTROL
RED GAIN
BLUEGAIN
ATW/AWC/MWB/
AUTO/LOCK/
0~ 255
0~ 255 MODE
DETECTTIME
DETECTMODE
D->N LEVEL
N->D LEVEL
NIGHTCOLOR
OFF/AUTO/ON
1sec ~ 10 sec
BRT/CDS/BRT+CDS
0.1lx~ 100 lx
10 lx~ 1000lx
COLOR/ BW
MODE
LEVEL BLC/H.BLC/WDR/ 0~ 15
ZONENUM.
CONTROL
H START
H END
VSTART
VEND
PZMMASKING
1~ 8
ON/OFF
6~ 658
106 ~ 758
6~ 407
86 ~ 487
BLUE/RED/CYAN/
CAMERAID
DISPLAY
POSITION
0~ 255
CAMID/TITLE
R.BOT/L.TOP/L.BOT
MIRROR
SHARPNESS
NEGATIVE
COLOR
FREEZE
BAUDRATE
PROTOCOL
F.OSD DISP.
OFF/H MIRROR/
0~ 15
ON/OFF
ON/OFF
ON/OFF
4800bps~ 512kbps
DEFAULT/VCL/KD6..
ALL/NONE/TOP/

-12-
5.2DisplaySETUPMENU
a.Press MENU keyabove2secondssothatSETUPMENU 1is
displayedon the screen.
b.Select itemof SETUPMENU using TELE(up)/ WIDE(down)key.
c. NEAR(+)/ FAR(-) keyis used toincrease/ decreasedataof
selected item.
5.4QuitSETUPMENU
a.Press the MENU keyagain. SETUPMENU is disappeared,
SAVE?”or QUIT?”is displayedatcenterof screen.
If thereis no change of adjustment stateof Camera,
QUIT?”is showed, else SAVE?”is showed.
①QUIT?”: quit SETUPMENU without saving changed value.
②SAVE?”: quitSETUPMENU withsaving changed value.
b.Press NEAR /FAR keytochoose,and press theMENU keyagain.
wholeSETUPMENU is quitted.
(If MENU keyis notpressed and TELE/WIDEkeyis pressed,
SETUPMENU is appeared again. )
5.5LENSMODE
①ZOOMSpeed Control
:Setzoomspeed1to10, 10 steps.
ZOOMSPEED 1 →2→→10
②Start ZoomRatio
:Setboundaryvalue ofWIDEzooming.
STARTZOOMx1~ x34 (inopticalzoomregion )
③EndZoomratio
:Setboundaryvalue ofTELEzooming.Itcan beset uptox90
including electroniczoom. (incasethe digitalzoomlimit is 2.5
times)SinceStart Zoomand End Zoomratioareset,
simultaneouslyCameramovestosetting zoomtimes. Soit can be
enabletoadjust inmoving todesired position.
END ZOOM x35 ~ x90 (indigitalzoomregion )
5.3MovebetweenSETUPMENU 1and SETUPMENU 2
a.Inordertochange fromSETUPMENU1toSETUPMENU 2,
select NEXTMENU using TELE/ WIDEkey, andpress
NEAR/ FARkey.
b.Inordertochange fromSETUPMENU 2toSETUPMENU1,
select RETURN MENU using TELE/ WIDEkey,andpress
NEAR/ FARkey.
<<LENSMODE>>
ZOOMSPEED10
STARTZOOMx1
ENDZOOMx35
E-ZOOMOFF
AFMODEONESHOT
O.RESET OFF
O.AFTIME5sec.
AFSENS.HIGH
MIN.DIST.50cm
RETURN
<<SETUP MENU>>
LENSMODE
AEMODE
WBMODE
NIGHTSHOTMODE
BLC/WDR MODE
PZMSETTING
CAMERAIDSETTING
SPECIALFUNCTION
FACTORYDEFAULT
<<LENSMODE>>
ZOOMSPEED10
STARTZOOMx1
ENDZOOMx90
E-ZOOMON
AFMODEONESHOT
O.RESET OFF
O.AFTIME5sec.
AFSENS.HIGH
MIN.DIST.50cm
RETURN
<Fig5-2.SETUPMENU change>
Setupmenu1
Setupmenu2

-13-
⑥ONESHOTAFRESET
:Useincaseof focusdeviation due toimpact, vibration etc.
AutoFocusing is operated during set time.
O.RESETOFF →ON →.
☞caution
1. Ithappensfocusdeviation according tocircumstancecondition
(brightness,facilitytofocusthe object,etc).
⑦ONESHOTAFTIME
:SetOneshotAFoperating time.When AFis completed, Focusmode
willbe Manual. Though AFis not completed, it stopswhen timeis
up.(unit:sec)
O.AFTIME1 →2 →→10
⑧AFSensitivity
: HIGH :Reaction ofAutoFocusis fast. It can be used when it shoot
objectsmoving fast.
LOW : AutoFocusis morestable. Infastmoving scene, AFdoesn’t
workeven thoughthescene is changed.It is forstabilizing
the scene.
AFSENS.HIGH →LOW →.
⑨MinimumDistance
:Settheminimumdistancewhichcan be focalized.
MIN. DIST.1cm →10cm →50cm →1m →3m →
10m →INF.
④E-ZoomControl
:ON meansup tox230,OFF meansonlyopticalzoomregion.
E-ZOOMOFF →ON →. . ..
Set FocusMode
:It is composed of three modes.
AUTO
:Usetofocusautomaticallyall the time.
MANUAL
: Usetofocusmanuallybypushing NEAR(+)/ FAR(-)key.
Even though MANUALmode, it will be focused inabout 5seconds
afterzoomin(TELE)/ out(WIDE), and returnto MANUALmode
automatically.
Thisis forfocusing accuratelyafterzooming.
ONESHOT
:It is similartoMANUALmode. But therearesomedifference.
Incasethe focusmode is ONESHOT,it is focused whenever
ONESHOT(AUTO/MANUALkey)keyis pushed.Itwillbe returned
toMANUALmode
afterseconds(SpecialMenu: O.S.AFTIME)even thoughcan not
be foundbestfocus.Inthis casepushONESHOT(AUTO/MANUAL
key)keyagain, it will be inbest focus.
PUSHAUTO(option)
: Whilepushing key,Focusmode willbe AUTO.
☞caution
1.According toModel, orderis Auto->Manual-> Oneshot,orAuto>
Manual->Pushauto.
<<LENSMODE>>
ZOOMSPEED10
STARTZOOMx1
ENDZOOMx90
E-ZOOMON
AFMODEMANUAL
O.RESET OFF
O.AFTIME5sec.
AFSENS.HIGH
MIN.DIST.50cm
RETURN
<<LENSMODE>>
ZOOMSPEED10
STARTZOOMx1
ENDZOOMx90
E-ZOOMON
AFMODEMANUAL
O.RESET OFF
O.AFTIME5sec.
AFSENS.HIGH
MIN.DIST.10cm
RETURN
<Fig5-4.MinimumFocusDistanceMODE>
<Fig5-3.LENSMODE>

-14-
5.6AEMODE
①ExposureMode
: Itis composed of fivemodesaccording tocircumstantialilluminance.
AUTO
: Exposureis controlled byShutterSpeed,Iris,Gaintomeet the
Brightenss.
SHUTTER FIX
: Low/High shutterspeedis fixed, Exposureis controlled byIris and
Gain.
IRISFIX
:Iris is fixed,Exposureis controlled byShutterSpeed and Gain.
(ShutterSpeed,GAINis notadjustand operateautomatically.)
GAIN FIX
: Gainis fixed, Exposureis controlled byShutterSpeedandiris.
MANUAL
: ShutterSpeed,Iris,Gainis fixed assetvalue regardless of
illuminance.
☞caution
1.Therearemenuitemsnot toadjust andtoskipaccording to
mode.
2.FieldIntegration is not operatedinShutterFix, GainFix, Manual.
MODEAUTO →SHTFIX →IRISFIX →
GAINFIX →MANUAL
②LOWSHUTTER Speed
: InShutterFix,ManualMode, range is from1/30 sec(2fields)
to2sec(128 fields).
LOWSHUTTER OFF →2FLDS~ 128FLDS
(FLDS meanshowmanytimesintegratedof CCD signal.)
③HIGHSHUTTER Speed
: InShutterFix,ManualMode, range is from1/60 secto
1/10,000sec.
HIGH SHUTTER 1/60 →1/100 →. . .. →1/10000
④IRIS
: InIris Fix,ManualMode, range is 17 phasesfromF1.6
(full Open)toCLOSE.
IRISCLOSE →F22 →F19 →. . . . →F1.6
⑤GAIN
: InGainFix,ManualMode,rangeis 17 phasesfrom8to38dB.
GAINOFF →8dB →10dB →. . . . →38dB
⑥Brightness
:Adjust levelofAutoIris. The smallerbrightness value is, the darker
it is, becauseirisisclosed more. Onthecontrarythebigger
brightness value is, the brighterit is, becauseirisisopened more.
BRIGHTNESS0~ 99
⑦MAXAGC
:AdjustMaxAGC level.
MAXGAINOFF→8dB →10dB →. . . . →38dB
☞caution
MaxGainis lessthan 14dB, and FieldIntegration doesnot work.
<<AEMODE>>
MODEIRISFIX
LOW SHUTTER NOTUSE
HIGHSHUTTER 1/60
IRISF5.6
GAINAUTO
BRIGHTNESS 40
MAXGAIN34dB
MAXFIELDS20FLDS
RETURN
<Fig5-6.BrightnessinAEMode>
<<SETUP MENU>>
LENSMODE
AEMODE
WBMODE
NIGHTSHOTMODE
BLC/WDR MODE
PZMSETTING
CAMERAIDSETTING
SPECIALFUNCTION
FACTORYDEFAULT
<Fig5-5.AEMODE>

-15-
⑧MAX FIELDS(option)
:Useforcompensating thelow illumination condition.Incasethat use
this function becauseoflow illumination condition, adjust maximum
integration fieldstogetbrighteranddynamicalimage. But thescene
becomesslowerthan OFF mode. The largermaxfieldsis,
simultaneouslythe noiseofimage is larger. This isphenomenon
becausetoosmall video output is integrated onmanyfieldsmemory.
Toget moredynamicalimage, adjust maximumintegration fields
and set maximumAGC gainasHIGH,thenmakebetterthe
standardofdynamic image.
MAXFLDSOFF →2FLDS →3FLDS →4FLDS →5FLDS
→6FLDS →7FLDS →8FLDS →. →
→80FLDS→160FLDS→320FLDS
→510FLDS
☞caution
1.InFieldsIntegration mode, noisesaswellasvideo information are
increased. When an ambienttemperaturekeepshigh, CCD pixel
defecthappenstobelargerandwhite. This is not due tofailure.
5.7WhiteBalanceMode
①WhiteBalanceMode
:Outerillumination condition is expressed byColortemperature,
Kelvin(°K).It is WhiteBalancethatshowswhiteaswhiteinany
illumination conditions. Itis composed of fivemodes..
ATW(Auto Trace Whitebalance )
: Traceautomaticallyunderanycondition inrange 2,800°K~ 8,000°K
(It can be adjustablered and blue pointofdesired whiteposition. )
AWB
: Considercurrent illumination condition, do whitebalancebyforce
and lockasmanual
INDOOR
: Usetoset the presetillumination condition as3200°K
OUTDOOR
: Usetosetthe preset illumination condition as5400°K
MANUAL
:Usetoadjust todesired RED, BLUEgainmanually.
AWC
:Considercurrent illumination condition, do whitebalanceby
forceand lockasmanual
②WhiteBalanceMode Control
: Itdisplaysand changesWhiteBalanceModeControlstatusof
Camera. (According to Mode, it just displaythe stateandnotto
adjust.)
ATWAUTO
INDOOR 3200°K
OUTDOOR 5400°K
MANUALR/BCONT
AWCLOCK →PUSH →. . . .
AWBAUTO
(LOCKmeansManualwhitebalancestatus. Press NEAR(+)/
FAR(-) keycontinuously, LOCKmode becomesPUSHmodeand
whitebalanceactsautomatically, and thenwhitebalancemode is
locked asmanual.)
<<WBMODE>>
MODEATW
CONTROLFRAME
REDGAINNOTUSE
BLUEGAINNOTUSE
RETURN
<Fig5-7.WBMODE>
<<SETUP MENU>>
LENSMODE
AEMODE
WBMODE
NIGHTSHOTMODE
BLC/WDR MODE
PZMSETTING
CAMERAIDSETTING
SPECIALFUNCTION
FACTORYDEFAULT

-16-
③RED GAIN(Range is differenton eachMode.)
:Adjust RED Gain, andtune thesensitivityof whitepoint.
MANUAL0 →1 →. →254 →255
④BLUEGAIN (Rangeis different oneachMode.)
:Adjust BLUEGain, and tunethesensitivityofwhitepoint.
MANUAL0 →1 →. →254 →255
④TurnoverLEVELfromDAY TONIGHT
:SettheLEVELtoturnoverfromDaytoNight.
D→N LEVEL0.1lx →1lx →10 lx→.
⑤TurnoverLEVELfromNIGHTTODAY
:SettheLEVELtoturnoverfromNight toDay.
N→D LEVEL10lx →100 lx →1000 lx→.
⑥Coloron NightshotMode
:SetColorModeon NightMode.
NIGHTCOLORB/W →COLOR →.
<<SETUP MENU>>
LENSMODE
AEMODE
WBMODE
NIGHTSHOTMODE
BLC/WDR MODE
PZMSETTING
CAMERAIDSETTING
SPECIALFUNCTION
FACTORYDEFAULT
<<NIGHTSHOTMODE>>
MODEAUTO
DETECTTIME5sec
DETECTMODEBRT
D->NLEVEL 1lx
N->D LEVEL 100lx
NIGHT COLOR B/W
RETURN
<Fig5-8.NIGHTSHOTMODE>
5.8NIGHTSHOTMODE
①NIGHTSHOTMODE
: Itis used inlow illumination condition. ON is Night mode, OFF is
normalstate.Sensitivityof camerabecomesmorehigherlevellike
BWcamera.
It can beavailableexternalIR illuminator.IncaseofAUTOmode is
converted ON/ OFF automaticallyaccording toilluminancechange.
MODEOFF →AUTO →ON →.
②NIGHTSHOTMODEDETECTTIME
:Settimetoprotect susceptibleconversion of ON/OFF according to
illuminancechange on Auto.When illuminacekeepsthe stateduring
detecttime, convertON/OFF.
DETECTTIME1sec. →2sec. →. →10 sec.
③NIGHTSHOTDETECTMODE
: Itis good tousewithexternalIR illuminatoron Auto. Select CDS
sensorON/OFF todetect the illuminancestatemoreeffectively.
DETECTMODEBRT →CDS →BRT+CDS →.
☞caution
BRTmeansshooting scene brightness, CDSsensorsoperation
dependson circumstantialbrightness. Select tomatchwithinstallation
circumstance.
<<SETUP MENU>>
LENSMODE
AEMODE
WBMODE
NIGHTSHOTMODE
BLC/WDR MODE
PZMSETTING
CAMERAIDSETTING
SPECIALFUNCTION
FACTORYDEFAULT
<Fig5-9.BLC/BMBMode>

-17-
5.9BLC/ WDR Mode
①Backlight Compensation Mode
: Itis forpreventing thecenterobject too darkenwhen the excessive
light is behind the centerobject. SetBACKLIGHTON, then brighten
thecenterobject inthe contrasttothe backgroundlight. Press
NEAR/FAR keyin2sec, Backlight mode becomeAUTO.
MODEOFF→BLC →H.BLC →WDR →.
H.BLC[HistogramBLC] isenhancedBLC function.
H.BLC makesthecenter objectbrighter toclear image
wherethebehindsceneistoo brighter thanthecenter object.
②Backlight Compensation Level
BLC LEVEL7(0~15 )
③Histogram BLC Level(H.BLC LEVEL)
H.BLC LEVEL10 (0~15 )
5.10 PRIVACYZONE
①SetPrivacyZONE
:PZM(PrivacyZone Mask)is tohide theunwanted viewtoprotect
privacyinvasion.ItworkswithZoom/PAN/TILToperation. Select
PZMzone upto8zones.
ZONENUM. ZONE1 →ZONE2 →.→ZONE8
②PZMcontrol
: Set ON/OFF foreachPZMZone.
CONTROLOFF →ON →.
③PZMHorizontalcenterstartingpoint
: SetPZMforthestartingpoint of Horizontalcenter.
HSTART332
④PZMHorizontalcenterendingpoint
: SetPZMfortheendingpoint of Horizontalcenter.
HEND 432
⑤PZMVerticalcenterstartingpoint
: SetPZMforthestartingpoint of verticalcenter.
VSTART206
⑥PZMVerticalcenterendingpoint
: SetPZMfortheendingpoint of verticalcenter.
VEND 286
⑦PZMMasking
: Choose theColortomask thePZMzone.8color
(Black,Gray,Light Gray,White,Red,Blue,Green,Yellow)is
available.
PZMMASKING BLUE →RED →.→GREEN
WDR [WideDynamicRange]
WDRismostlyuseful functiontotakeimagefromindoor to
window. WDRisthenewtechnology toreducethe
differentiationsbetweendarkandbrightareas.
④WDRLevel
WDRLEVEL5(0~15 )
☞Cautions
1. WhileusingWDRmodetowardfluorescentlampor bright
light, youmayfindoutunwantedcolor. However, thisis
normal conditionfor WDRfunction.
2. WhileusingWDRmode, thedigital zoomdoesnotwork.
<<BLC/WDR MODE>>
MODEWDR
WDR LEVEL 5
RETURN
<<SETUP MENU>>
LENSMODE
AEMODE
WBMODE
NIGHTSHOTMODE
BLC/WDR MODE
PZMSETTING
CAMERAIDSETTING
SPECIALFUNCTION
FACTORYDEFAULT
<Fig 5-10. Privacy Zone Setting >

-18-
5.11 CameraID SET
①IDSET
:CameraID is indicating numberassigned eachCameraincaseof
controlling manyCameras.It is from0to255.Butincaseof 0,
that is notdisplayed onscreen.It is alwaysdisplayedeven though
wholeOperating OSD is disappeared on thescreen. But it is
possibletomakenondisplayand tochoosedisplayposition
(BOTTOMRIGHT, TOPRIGHT,TOPLEFT)byRS-232C
communication.
CAMERAID0~ 255
☞caution
1. Incaseof CameraIDFIXmodel, it cannot beselected..
2. ID is not changed byMENU controlthrough communication.
②DISPLAYMODE
:Choosewhichis todisplayCameraID orTitle.
DISPLAYCAMID →TITLE →.
③DISPLAYPOSITION
:Choosewhereis todisplayCameraIDorTitleon Right Bottom,
Left Top, Right Top ornottodisplay.
POSITIONR.BOT →L.TOP →R.TOP →NONE
QuicksettingmethodforPrivacyZoneMasking
1. Zoominwide aspossibleasyou can.
2. Select Zone Numberin ZONENUM.”.
3. Select On”bypushthe rightbutton.
4. PushMenubutton onthe CONTROL”tobe abletomoveto
wanted position spot and pushagaintogo back tomainMenu.
5. Set theH andVvalue onthe Menu.
6. Select acolor.
7. PushMenubutton tosavethesetting.
<<PRIVACYZONE>>
ZONENUM.ZONE1
CONTROLON
HSTART332
HEND432
VSTART206
VEND286
PZMMASKINGBLUE
RETURN
PRESSMENUTOMOVE
TELE: ↑, WIDE: ↓
NEAR: →,FAR: ←
RETURNMENU
<Fig 5-11. Privacy Zone Setting >
<<SETUP MENU>>
LENSMODE
AEMODE
WBMODE
NIGHTSHOTMODE
BLC/WDR MODE
PZMSETTING
CAMERAIDSETTING
SPECIALFUNCTION
FACTORYDEFAULT
<<CAMERAIDSET >>
CAMERAID001
DISPLAY CAMID
POSITION R.BOT
ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmn
opqrstuvwxyz12345678
9!?#$%&<>*,.:;/+-=~ ■
TITLE :HONEYWELL
RETURN
<Fig 5-12. CAMERAIDSetting>

-19-
5.12 SPECIALFUNCTION
①MirrorMode
: ModeON is MirrorMode,OFF is generalscreen state.
MIRROR OFF →HMIRROR →
VMIRROR →FLIP....
②Sharpness
:Usetochange the contourofScene.
SHARPNESS 0~15
③Negative Mode
:UseforPositiveandNegativemode. ONis Negativemode, OFF is
Positivemode namelygeneralscreen state.
NEGATIVEOFF →ON →.
④ColorMode
:Useforchanging colorand monochrome(black&white)mode .
ON is Colormode, OFF is black&whitemode.
COLOR ON →OFF →.
LetsentertheTitleas “R1”, example
-. Select theposition of titlecharacterbyusing NearorFarkey.
The chosen position is blinking.
(Only chosenCursorwillbe blink as ■”,restofthem
willbe shownasablank ”.)
TITLE: □
-. Select the character “R”among ⓐ~ ⓓbyusing UP,DOWN,
(+),(-) key. Thechosen character “R”is blinking.
ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmn
opqrstuvwxyz12345678
9!?#$%&<>*,.:;/+-=~■
-. Press MENU key, the character “R”is entered intheTitle.
(Automaticallythe position willbe forwardtonextposition.)
TITLE: R □
-.If youwanttoeditspecifiedcharacter,youshalluse
TELE/Wide tomove onthe positionandNEAR/FARto
selectonthe character.ByusingTELE/WIDE toposition
the charactertocontinue toedit.
-.Selectcharacter 1”usingTELE,WIDE,NEAR,FAR
buttonanditwillblink the cursoronthecharacter 1”
ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmn
opqrstuvwxyz12345678
9!?#$%&<>*,.:;/+-=~
-. PushMENUtoenterthecharacter 1”.
TITLE: R1 □
▣Howto EntertheTitle ▣
④Title
: Itis the nameof Camera.It enters10 charactersincluding blank..
TITLE: ■■■■■■■■■■
<<SETUP MENU>>
LENSMODE
AEMODE
WBMODE
NIGHTSHOTMODE
BLC/WDR MODE
PZMSETTING
CAMERAIDSETTING
SPECIALFUNCTION
FACTORYDEFAULT
<< SPECIALFUNCTION >>
MIRROR OFF
SHARPNESS 8
NEGATIVEOFF
COLOR ON
FREEZEOFF
BAUDRATE 9600bps
PROTOCOLDEFAULT
F.OSD DISPALL
RETURN
<Fig 5-13. SPECIALFUNCTION>

-20-
⑤Freeze Mode
: Itpausecurrentimage. ON is tostop, OFF is toreturntonormal
state.
FREEZEON →OFF →.
☞caution
1. Freeze imagedoesnotsavewhenyouresetthe system.
Thissystemdoesn thave its ownmemory.
⑥BAUDRATE
: Use tocommunicatethroughRS232C,RS485,RS232TTL.
BAUDRATE4800bps →9600bps →.
→312kbps
☞caution
1. Ifthe BaudRatedoesnotmatchbetween Cameraandexternal
system, it mayoccurthe communication failure. Pleasemake
sureaproperBaud Rate.
⑦PROTOCOL Setting
:SettingthePROTOCOLwith communicationdevice.
PROTOCOL DEFAULT →VCL →KD6 →P/D →.
⑧FunctionOSDDisplay
OSD DISPALL →NONE →TOP →
BOTTOM →....
ALL : Whole FunctionOSDdisplay
(FocusMode,Keystate,Zoom Ratio, ID)
TOP: Only UpperOSDdisplay ( FocusMode,key
state )
BOTTOM : Only LowerOSDdisplay ( Zoom Ratio, ID)
NONE: Allthe OSDwillnotdisplay exceptMENU
OSD.
Caution
1. The displayof ID and TITLEcan be only set inCAMERAID
SETTING.
5.13InitialSet
: Set the INITIALSETMode ON sothatall changed dataare
returnedtoshipping condition. ForInitialization, select YES?”by
usingNEAR,FAR keyandpushMENUkey.Select NO?”
andpushMENU,noinitializationandreturn toMainMenu.
☞caution
1.Makesurewhen Initialization set as “YES?”, all changed dataare
returntoshipping condition.
2.Somemenu asID,TITLE,etcarenot initialized.