Honeywell IS2535T User manual

•Range: 11 x 12 m
•Global compliance: meets many of
the world motion sensor standards
including the European TS 50131-2-2
Grade 2, Class II
•Selectable Pet immunity: 0, 18 or
36 Kg
•Easy installation: 45oterminal blocks,
EOL terminals and an automatic
walktest
•Selectable sensitivity: 4 settings to
adapt to the environment
•Patented look-down mirror provides
optimum detection directly beneath
the sensor
•Tamper switch: Is activated before
access is possible
•White Light Immunity of minimum
6500 Lux reduces the chance of false
activation
•Bug guard prevents insects to access
the sensor optics which reduces the
chance of false activation
•Silent ray allows it to be used in quiet
environments
•Flexible mountings: wall and
cornermount breakout holes available.
Or use the SMB-10 bracket range
(swivel, ceiling, tampered)
•False alarm immunity: designed to
meet tough false alarm standards. A
microprocessor helps to separate
false alarms from real alarms
•Advanced Dual slope temperature
compensation
•Large wiring channel on back to allow
surface wiring
•Sabotage-resistant lens design
Features:
IS2535T
Microcontroller Based PIR Pet Immune Sensor
A reliable PIR for home and office.
Honeywell's new IS2500 series consists of a complete range of
easy-to-install motion sensors featuring reliable detection. The
design of the entire IS2500 series is sleek and attractive, all
sensors share the same family look.
To suit your application, a selection can be made from different
levels of pet immunity or for the high security setting using the
high security fresnel lens.
The IS2535T sensor has an improved detection performance
and false alarm immunity to maximise reliability.
And last but not least: This sensor conforms to European
standards EN 50131-1 and TS 50131-2-2 Grade 2,
Environmental Class II.

HSCE-IS2535T-01-EN(11/05)DS-A
November 2005
© 2005 Honeywell International Inc.
Honeywell Security & Custom Electronics
Newhouse Industrial Estate
Motherwell
Lanarkshire
ML1 5SB
Tel: [phone]
Fax: [phone]
www.honeywell.com/security/uk
IS2535T
Microcontroller Based PIR Pet Immune Sensor
Detection method: Dual element passive infrared
Range: 11 x 12 m
PIR sensitivity: Lowest (3-5 steps), Low (2-4 steps),
Medium (1-3 Steps) and High (1-2 steps)
Pet immunity: 0, 18 or 36 Kg
Mounting height: 2.3 m to 2.7 m
Power requirements: 8.5 - 15.4 Vdc, 17 mA @ 12 Vdc
Alarm relay: Form A / 30 mA@24 Vdc;
Max. 40 Ohm protective resistor
Cover tamper switch: 30 mA@24 Vdc
Operating temperature: -10oto +55oC
Temperature compensation: Advanced dual slope
Relative humidity: 5% - 95% non condensing
RF Immunity: 30 V/m from 10 to 1000 MHz
WLI: More than 6500 Lux
Dimensions: 112 x 60 x 40 mm (HxWxD)
Weight: 87 gram
Includes: Mounting hardware
Lens masking
Look down mask
High security / Pet immune lenses
IS2535T 11 m PIR motion sensor with Pet Immunity
Specifications: Detection Patterns:
Ordering:
SMB-10: White swivel mount bracket (5 pack)
SMB-10C: White ceiling mount bracket (5 pack)
SMB-10T: Tampered white swivel mount bracket (5 pack)
Accessories:
•EN50131-1 & TS 50131-2-2 Grade 2, Class II
•CE
Agency Listings:
IS2535T
•Top View
•Side View High security lens
•Side View Pet immune lens
Honeywell reserves the right to alter the specification of products without prior notice.