Honeywell DPSL200 User manual


 U.S Registered Trademark
Copyright © 2018 Honeywell Inc.  All Rights Reserved EN1B-0651GE51 R0818
DPSL200, DPSL1000
DIFFERENTIAL PRESSURE SWITCH (LIQUID & GAS)
INSTALLATION INSTRUCTIONS
1
Read these instructions before installing and operating this
product, and retain for future reference.
WARNING! Isolate mains supply before commencing
installation or making adjustments.
Check that the product is free from damage before
installation.
For use only with liquids (neutral or slightly aggressive) and
non-flammable gases.
This product must be installed in accordance with these
instructions and any applicable local or national electrical
and safety regulations. Improper installation or application
of this device can be dangerous.
This product cannot be used for U.S. FDA-controlled
application areas.
Refer to the DPSL200, DPSL1000 Product Data Sheet
(EN0B-0772GE51) for full technical specifications.
2 3
40
113.90
60
7.50
Ø
5.20
±
70°
61
30
4 5
Liquid Gas/Air
-10 to 80°C
(
14 to 176°F
)

DSPL200, DSPL1000DPSL200, DPSL1000 – INSTALLATION INSTRUCTIONS

Manufactured for and on behalf of the Environmental & Energy Solutions Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative:
Home and Building Technologies
Honeywell GmbH
Böblinger Str. 17
71101 Schönaich
Germany
Tel.: [phone]
Fax: [phone]
http://europe.hbc.honeywell.com
Modifications reserved. Printed in Germany
EN1B-0651GE51 R0818
7 8 9
A
AA
A
10 11 12
P1
P2
+
–
+
–
P
322
11
3
+
–
6-8 mm
-10 to 80°C
(
14 to 176°F
)
G1/8”
‘click’