Honeywell 32207484 User manual

® U.S. Registered Trademark
Copyright © 2002 Honeywell International Inc.
All Rights Reserved
69-1400-1
Deluxe
Programmable
Thermostat

DELUXE PROGRAMMABLE THERMOSTAT
69-1400—1 2
FEATURES
• Program up to four time periods and temperature setpoints for each daily
schedule.
• Set different schedules for each day of the week.
• Backlit for easy readability of display when a key is pressed.
• Press Information key for present setting information and outdoor
temperature (select models).
• Select fan operation for each period of each day (select models with fan key).
• Temporarily set the temperature warmer or cooler.
• Daylight Time key for easy switching in and out of Daylight Savings Time.
• Program end of Hold (1 to 255 days) for added comfort and energy savings.
• Copy key for easier programming.

DELUXE PROGRAMMABLE THERMOSTAT
3 69-1400—1
PROGRAMMING
The keyboard is located behind the thermostat cover with three frequently used keys
by the display. The thermostat display shows day, time, program period, temperature,
system and fan operation selection.
The thermostat can be set for four times and up to eight temperatures for each day
of the week (28 independent time and 56 temperature settings). The sand tkeys
provide quick temporary temperature changes to increase your comfort. The Hold
Temp key provides energy efficient operation for extended periods of time.
Before starting the programming procedure, you can use the following charts to
organize your program schedule. The factory preprogrammed time, temperature and
fan settings are shown in brackets. If you choose not to program a daytime energy
savings period, press the period key (Leave or Return) until the time is blank. The fan
setting feature is available on select thermostat models

DELUXE PROGRAMMABLE THERMOSTAT
69-1400—1 4
Period Start Time Heat Setpoint Cool Setpoint Fan Setting
Monday
Wake [6:00 AM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Leave [8:00 AM] [62°F (16.5°C)] [85°F (29.5°C)] [Auto]
Return [6:00 PM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Sleep [10:00 PM] [62°F (16.5°C)] [82°F (28°C)] [Auto]
Tuesday
Wake [6:00 AM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Leave [8:00 AM] [62°F (16.5°C)] [85°F (29.5°C)] [Auto]
Return [6:00 PM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Sleep [10:00 PM] [62°F (16.5°C)] [82°F (28°C)] [Auto]
Wednesday
Wake [6:00 AM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Leave [8:00 AM] [62°F (16.5°C)] [85°F (29.5°C)] [Auto]
Return [6:00 PM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Sleep [10:00 PM] [62°F (16.5°C)] [82°F (28°C)] [Auto]
Thursday
Wake [6:00 AM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Leave [8:00 AM] [62°F (16.5°C)] [85°F (29.5°C)] [Auto]
Return [6:00 PM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Sleep [10:00 PM] [62°F (16.5°C)] [82°F (28°C)] [Auto]
Friday
Wake [6:00 AM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Leave [8:00 AM] [62°F (16.5°C)] [85°F (29.5°C)] [Auto]
Return [6:00 PM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Sleep [10:00 PM] [62°F (16.5°C)] [82°F (28°C)] [Auto]
Saturday
Wake [6:00 AM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Leave [8:00 AM] [62°F (16.5°C)] [85°F (29.5°C)] [Auto]
Return [6:00 PM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Sleep [10:00 PM] [62°F (16.5°C)] [82°F (28°C)] [Auto]
Sunday
Wake [6:00 AM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Leave [8:00 AM] [62°F (16.5°C)] [85°F (29.5°C)] [Auto]
Return [6:00 PM] [70°F (21°C)] [78°F (25.5°C)] [Auto]
Sleep [10:00 PM] [62°F (16.5°C)] [82°F (28°C)] [Auto]

DELUXE PROGRAMMABLE THERMOSTAT
5 69-1400—1
Setting the Current Day and Time
IMPORTANT
Always press the keys with your fingertip or similar blunt tool. Sharp instru-
ments like pens and pencil points can damage the keyboard.
1. Press Set Current Day/Time.
NOTE: On initial power up or after an extended power loss, 1:00 pm flashes on
the display until a key is pressed.
2. Press Day until the current day is displayed.
NOTE: Sun = Sunday, Mon = Monday, Tue = Tuesday, Wed = Wednesday,
Thu = Thursday, Fri = Friday, Sat = Saturday.
3. Press Time sor Time tuntil the current time is displayed.
NOTE: Tapping the Set Current Day/Time will change the time in one hour
increments.
NOTE: If the current time is Daylight Savings Time, press Daylight Time until
DST is displayed.
4. Press Run Program.
M14619
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Set Current
Day/Time
Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Set Day/Time
Mon
PM
M14620
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day
Day Heat/Cool
Settings
Daylight
Time Copy
Set Day/Time
PM
Tue
M14621
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day
Time
Heat/Cool
Settings
Daylight
Time Copy
Set Day/Time
AM
Tue
M14622
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time
Daylight
Time
Copy
Set Day/Time
AM
DST
Tue
M14623
Time Set Program
System Fan
Run
Program
Run
Program Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy Wake Room
System
Fan
Heat
Auto
AM
DST
Tue

DELUXE PROGRAMMABLE THERMOSTAT
69-1400—1 6
Programming the First Day
Start by programming the Wake time and temperature (and fan operation on select
models) for any one day:
1. Press Wake.
2. Press Day until the desired day is displayed.
3. Press Time sor Time tuntil the desired Wake time is displayed.
NOTE: The program times are in fifteen minute intervals.
(Example: 8:00, 8:15, 8:30).
4. Press increase sor decrease tkey until the desired Wake temperature is dis-
played.
NOTE: The setpoint temperature range is 40 to 90°F (7 to 31°C) for heating
and 45 to 99°F (9 to 37°C) for cooling.
NOTE: Press Fan to modify fan operation. Auto means the fan will run only
when the heating or cooling equipment is operating. On means the fan
will run continuously for the entire period.
M14635
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake
Wake
Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Set Program
Wake
System
Fan
Heat
Auto
AM
Heat
Tue
Setting
M14636
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day
Day Heat/Cool
Settings
Daylight
Time Copy
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Heat
Setting
M14637
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Time
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Heat
Setting
M14638
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Heat
Setting

DELUXE PROGRAMMABLE THERMOSTAT
7 69-1400—1
5. Press Heat/Cool Settings to switch to other system temperature setpoint.
NOTE: The program times are the same for both heating and cooling.
6. Press increase sor decrease tkey until the desired temperature setpoint is dis-
played.
7. Press Leave, Return or Sleep and repeat steps 3, 4, 5and 6for programming the
rest of the day. The first day is now programmed.
IMPORTANT
Repeat steps 1 through 7 for each day of the week that has a different pro-
gram than the first day. Refer to Copying a Day section to copy any program
day to another.
8. Press Run Program when all days are programmed.
M14639
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Heat/Cool
Settings
Daylight
Time Copy
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Cool
Setting
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
M14640
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Cool
Setting
M14641
Time Set Program
System Fan
Run
Program
Run
Program Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy Wake Room
System
Fan
Heat
Auto
AM
DST
Tue

DELUXE PROGRAMMABLE THERMOSTAT
69-1400—1 8
Copying a Day
NOTE: The thermostat must be in the program mode to use the copy feature. Go to
step 2if the thermostat is already in the program mode.
1. Press Wake.
2. Press Day to select the day to be copied if different from the day displayed.
3. Press Copy.
4. Press Day until the day to be copied to is displayed.
5. Press Copy.
NOTE: donE will be displayed for two seconds and then the normal program
display will be shown.
6. Repeat steps 2through 5for all the days desired.
7. Press Run Program.
M14642
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake
Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Set Program
Mon
Wake
System
Fan
Em Heat
Auto
AM
Heat
Tue
Setting
M14643
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day
Day Heat/Cool
Settings
Daylight
Time Copy
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Heat
Setting
M14644
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Copy
Mon
M14645
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day
Day Heat/Cool
Settings
Daylight
Time Copy
Mon Wed
M14646
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Copy

DELUXE PROGRAMMABLE THERMOSTAT
9 69-1400—1
Clearing Program Period
NOTE: The thermostat must be in the program mode to use the clear feature. Go to
step 2if the thermostat is already in the program mode.
1. Press Wake, Leave, Return or Sleep.
2. Press Day until the desired day is displayed.
3. Press Leave, Return or Sleep until the start time and temperature setting are
cleared (approximately 3 seconds)
NOTE: Wake cannot be cleared..
4. Repeat steps 2and 3for all the periods to be cleared.
5. Press Run Program.
M14647
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave
Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Set Program
Mon Leave
System
Fan
Heat
On
AM
Heat
Setting
M14648
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day
Day Heat/Cool
Settings
Daylight
Time Copy
Set Program
Leave
System
Fan
Heat
On
AM
Heat
Sat
Setting
M14649
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Leave
Set Program
Leave Heat
Sat
Setting

DELUXE PROGRAMMABLE THERMOSTAT
69-1400—1 10
OPERATING THE DELUXE
PROGRAMMABLE THERMOSTAT
Setting Temporary Temperatures
Changing Temperature Setting Until the Next Program Period
Press increase sor decrease tkey until the desired temperature setpoint is displayed.
NOTE: If sor tappear under the temperature display, it means that both the heating
and cooling setpoints are being adjusted. Tapping the key will change both
the heat and cool setpoints by one degree. Press after the desired set-
point is reached to check the setpoints.
NOTE: The temporary temperature setting is displayed for approximately 3 seconds.
The setting is cancelled when the next period starts or when Run Program is
pressed.
Changing Temperature Setting Indefinitely
1. Press Hold Temp.
2. Press increase sor decrease tkey to change the setting, if desired.
3. Press Heat/Cool Settings to change between heat and cool settings.
M14650
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
Heat
Setting
M14651
Time Set Program
System Fan
Run
Program
Hold Temp
Hold Temp Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
System
Fan
Heat
Auto
Heat
Setting
M14652
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Daylight
Time Copy
System
Fan
Heat
Auto
Heat
Setting
M14653
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time Wake Leave Return Sleep
Day Heat/Cool
Settings
Heat/Cool
Settings
Daylight
Time Copy Cool
Setting