Hoover 5650 Heritage User manual

Heritage
Chemical Free Cleaning
Accessories Included
Compact
5650
HERITAGE
Large Capacity
Multi Purpose
Steam Cleaner
11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 1 25/08/11 4:49 PM

1
9
11
10
12
13
20 21 22 23
15
10
24 25
16
19
17
18
14
6
7
8
2
3
5
4
11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 2 25/08/11 4:49 PM

5650 Heritage
Congratulations on the purchase of your new HOOVER steam cleaner. There are many useful features
built into your cleaner and we recommend that you carefully read this instruction manual so that you
may take best advantage of them.
Features:
1. Accessory storage cover
2. Park position
3. Filler cap
4. Carry handle
5. On/off button
6. Power light
7. Thermostat indicator light
8. Steam adjustment knob
9. Hose inlet and cover
10. User handle
11. Trigger lock button
12. Steam trigger
13. Hose
14. Extension tubes x 3
15. Window squeegee
16. Steam pad (to be fixed
to squeegee)
17. Elbow attachment
18. Steam mop head
19. Mop pad
20. Small wire brush
21. Large wire brush
22. Wallpaper scraper
23. Jet nozzle
24. Measuring Jug
25. Funnel
Specifi ations:
Power Cable Length: 6m
Water Capacity: 1500mL
Wattage: 1350W
Run Time: 30-40mins
Heat Time: 7-9mins
Features
11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 3 25/08/11 4:49 PM

11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 4 25/08/11 4:49 PM

Before you Begin
Before you begin
This cleaner must be operated in accordance with these instructions and used only for domestic
household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics.
This cleaner is not fit to be used as an industrial cleaner hence will void the manufacturer’s warranty
if used inappropriately.
Please read these instructions thoroughly
This will ensure you obtain full benefit from your new cleaner. Keep this Instruction Manual
in a handy place for future reference.
Important
Always switch the cleaner off and remove the plug from the electricity supply before cleaning
your appliance, when not in use, or attempting any maintenance task. The cleaner must only be
connected to an AC supply at the voltage shown on the rating plate. This cleaner should only
be used for its intended purpose as described in these instructions.
11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 5 25/08/11 4:49 PM

Warning
Warning: the power and heat of the steam may have adverse consequences for
certain materials.
Always check, before putting the device into operation, whether a surface or material
is actually suitable for treatment with steam. Do this by executing a test on a hidden
surface of the material you wish to treat.
1. The force and heat of the steam may damage certain materials. Some fabrics may react to the temperature
of the steam. For example: unpainted wood or leather can be bleached by the action of steam; glossy
plastic can be dulled by steam; acrylic fibre, velvet and linen react very sensitively to the temperature
of steam.
2. Do not hold the steam in the direction of one spot for long periods! This can cause damage to materials!
3. Exposure to hot steam can cause scalding!
4. Burns can occur from touching hot parts, hot water or steam. Use caution when draining the appliance
after use as there may be hot water in the unit.
5. The filler cap must not be open during use, ensure it if firmly sealed before commencing use.
6. Always open the filler cap slowly when opening the water tank, this will allow any remaining steam to
escape gradually.
7. To reduce the risk of contact with hot water emitting from the steam nozzle, hold the nozzle away from
the body and check for signs of condensation or leakage.
8. Nozzle and attachments become hot during use. To avoid injuries, do not touch nozzle while using this
appliance. Do not attempt to change attachments while unit is emitting steam.
9. The hose may become hot during use. Use caution when handling to avoid burns or other injury.
10. Never directly steam towards people, animals or plants.
11. Never attempt to steam clean clothes which are still being worn.
11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 6 25/08/11 4:49 PM

Warning
12. Do not handle or operate the steamer with wet hands and follow electrical safety precautions
at all times, i.e., never operate without shoes.
13. Ensure that the cleaner does not operate on an empty tank.
14. Do not fill the steam water tank with more than 1,5 litres of water. Overfilling may result in a
possible electrical shock.
15. Only water should be used in this unit. Other cleaning agents will damage the unit and can
cause injuries.
16. Do not add cleaning solutions, scented perfumes, oils or any other chemicals to the water
used in this appliance, as this may damage the unit or make it unsafe for use.
17. Use tap water or distilled/purified water if the tap water in your area is very hard.
18. Do not apply steam directly to very cold glass surfaces.
19. The steam should not be aimed directly at parts containing electrical components such
as the electrical components inside an oven.
20. Damage caused by improper use of steam on objects, materials, persons and/or animals
or by not observing the instructions in this manual will void the warranty.
11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 7 25/08/11 4:49 PM

Instructions for Use
Always switch the appliance off efore you attach or remove the hose and/or
accessories, and make sure the attachments and inserts are cooled down
completely before connecting or disconnecting.
Connecting the hose
1. Pull the hose inlet flap down at the front
of the cleaner.
2. Line up the locating keyway on the plug
with the socket.
3. Push the hose connector firmly and fully
into the cleaner socket.
Assembling the
extension tubes
1. Connect the extension tubes to the user
handle. Push the extension tubes onto
the handle connection nozzle or to the
previous extension tube as far as they will
go until a click is heard.
2. Repeat step 1 for the next extension
tube, connecting it to the end of the first
extension tube and the same for the
third extension tube if required.
11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 8 25/08/11 4:49 PM

Instructions for Use
Connecting the
steam mop head
The steam mop head is used for cleaning
large, washable walls and floor areas.
The steam mop head can be used with
or without the mop pad. Sensitive
surfaces should be used with the mop
pad attached.
1. Fit the elbow attachment to the steam
mop head and twist half a turn.
2. Fit the steam mop head to
the handle or to the extension tube.
3. To fit the mop pad to
the steam mop head, pull the mop
pad under the clips on both sides.
4. The cleaning power of the
mop pad can be optimized by
turning and changing the mop
pad regularly.
11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 9 25/08/11 4:49 PM

Instructions for Use (continued)
Connecting the accessories
to the user handle or
extension tube
1. Select the desired accessory,
most of the accessories are stored in
the accessories storage compartment
in the front part of the cleaner.
2. Attach the required accessory. Before
attaching the accessory, the jet nozzle
must be attached to the handle or to the
extension tube. Slide the jet nozzle into
the accessory head until it locks in place.
3. Push the jet nozzle directly onto the
handle connection nozzle or onto the
extension tube as far as they will go until
a click can be heard.The jet nozzle can be
used with various fittings.
Always switch the appliance off efore you attach or remove the hose and/or
accessories, and make sure the attachments and inserts are cooled down
completely before connecting or disconnecting.
11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 10 25/08/11 4:49 PM