HP Compaq Presario Manual

Filename: s3admca.doc Title: Addendum [3-column 1 or 2 pages]
Template: HP-Print2K.dot Author: davidg Last Saved By: AnnSchmidt
Revision #: 10 Page: 1 of 1 Printed: 10/25/02 11:45 AM
Using
Multi-Channel
Audio Speakers
If your PC has multi-channel audio
speakers, you can connect 4
channels for 4 speakers output or
6 channels for 5.1 speakers
output.
Connecting and
configuring a multi-
channel speaker system
1 Turn off the PC.
2 Connect the three audio cable
plugs from the speaker system to
the connectors on the back of
the PC.
Speaker
plugs
Back of PC
connectors
Front speakers Audio (line)
Out (lime-green)
Rear speakers Audio (line)
In (blue)
Center/sub-
woofer speakers Mic-1 (pink)
3 Turn on the PC.
4 Turn on the speaker system.
5 Click Start on the taskbar.
6 Choose All Programs.
7 Double-click Multi-channel
Sound Manager.
8 Click the Speaker
Configuration tab.
9 Select the option for the number
of speakers in your system, for
example, 6 channels mode
for 5.1 speakers output.
10 Click OK.
Configuring multi-
channel audio output
for the DVD player
1 Insert a DVD or start InterVideo
WinDVD.
2 Right-click in the WinDVD
window, and then click
Properties.
3 Click the Audio tab.
4 Click the option for the number
of speakers matching your multi-
channel speaker system.
5 Click OK.
Note: If you want to play a stereo DVD,
repeat steps 1 through 5 and
change the audio properties for
WinDVD to match the DVD
output.