or
1
2
3
IMPORTANT: When the computer starts, the system
automatically converts the file system on your hard
drive. The conversion may take several minutes. Do not
stop the process. When the conversion is completed the
computer will restart.
When prompted, begin your product registration
process. Online instructions will guide you through the
registration and preinstalled software setup process.The
setup time varies by computer configuration.
Presario 4000 Series
Quick Setup
©2002 ompaq Information Technologies Group, L.P. OMPAQ. ompaq, the ompaq logo and Presario are trademarks of ompaq Information Technologies Group, L.P. in
the United States and other countries. All other product names mentioned herein may be trademarks of their respective companies. Nothing herein should be construed
as constituting an additional warranty. First Edition March 2002.
compaq.com/athome
Start Up
>Accessories - add performance and personalization to your new Presario
computer with ompaq quality tested and certified options like printers,
personal audio players, gaming products and more! Go to
compaq.com/athome/accessories (for US only).
>Help and support - whether you are a novice or technical expect, knowledge,
information and assistance are available when and where you need it. For the
quickest and accurate solutions go to compaq.com/consumersupport
>Let us hear from you - participate in product discussions, review commonly
asked questions and answers or post new questions to a community of users.
compaq.com/communities
>Compaq Documentation Library CD - learn more about your computer from the
information contained on your documentation D, such as identifying
components, installing upgrades, connecting to the Internet, troubleshooting
tips, and setting up a safe and comfortable environment.
Compaq features
http://compaq.com/athome
Power
and Voltage
NOTE: Voltage is preset to the correct rating.
If in doubt, contact your local power utility.
The rating label on the device shows which F class (A or B) the equipment falls into. lass B devices have an F logo or F ID on the label. lass A
devices do not have an F ID or logo on the label. Once the class of the device is determined, refer to the corresponding statement. For complete
details, read the Safety and Regulatory Information guide contained on the Documentation Library D. 274893-001
