HP MSR930 Series Assembly instructions

EL-MF877-00 Page 1
Template Revision B
Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model)
[List multiple models if applicable.]
HP MSR930 Wireless Router (JG512A)
HP MSR930 RTUZ2930WN Router (JH012A)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
1
Batteries
All types including standard alkaline and lithium
coin or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
2
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0

EL-MF877-00 Page 2
Template Revision B
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screw driver
2#
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Unscrew the screws on part 1, and then remove part 1.
2. Unscrew the screws on part 2, and then remove part 2.
3. Unscrew the screws on part 3, and then remove part 3 and part 5.
4. Unscrew the screws on part 3, and then remove part 3 and part 5.
5. Unscrew the screws on part 6, and then remove part 6.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00 Page 3
Template Revision B
3 Material of the facility built
Facility
Components
Material
Weight(g)
Weight
percentage
Selective treatment for
materials and components
Details
1
Fe
600
21.40%
Fe
recycling
2
Cu
28.6
1.02%
Cu
recycling
3
Fe
560
19.97%
Fe
recycling
4
Complex
PWB
11
0.39%
5
Fe
4.7
0.17%
.
Fe
recycling
6
Complex
PWB
1600
57.06%
4. Revised record
Date
Version
Author
Modify content
Figure 1 Remove part 1 Figure 2 Remove part 2
Figure 3 Treatments to the product

EL-MF877-00 Page 4
Template Revision B
2013.05.09
V0
Jiang Xuchao
Initial version
2014.07.01
V1
Liu Binghui
Add the module JH012A