HP ProCurve Secure Router 7203dl J8753A J8753A Assembly instructions

Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
Procurve Secure Router 7203dl (J8753A)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA) With a surface greater than 10 sq cm 1
Batteries All types including standard alkaline and lithium coin
or button style batteries 0
Mercury-containing components For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries 0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm Includes background illuminated displays with gas discharge lamps 0
Cathode Ray Tubes (CRT) 0
Capacitors / condensers (Containing PCB/PCT) 0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height 1
External electrical cables and cords 0
Gas Discharge Lamps 0
Plastics containing Brominated Flame Retardants 0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations. 0
Components and waste containing asbestos 0
Components, parts and materials containing
refractory ceramic fibers 0
Components, parts and materials containing
radioactive substances 0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
EL-MF877-00 Page 1
Template Revision A

Tool Description Tool Size (if
applicable)
Flat Head Screw Driver 3/16"
Phillips Head Screw Drive P1
Nutdriver P6 - 3/16"
Torx Screwdriver T9
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove "Encryption Module" labeled rear plate using Flat head screwdrive
2. Remove screws securing top cover using Phillips Screwdriver
3. Remove top cover
4. Remove screws securing the "Console" RS-232 connector using Nutdriver
5. Disconnect cables attaching fans to PCA
6. Remove screws securing PCA to sheet metal using Phillips Screwdriver
7. Separate the PCB and screws
8. Remove screws attaching fans to sheet metal using Torx T9 screwdriver
9. Remove fans from sheet metal
10. Unscrew and remove front metal covers marked "Slot 1", "Slot 2" and "Slot 3" (if installed)
11. Using flat screwdriver pry-off plastic "Power/Fault" from front left sheet metal
12.
13.
14.
15.
16.
17.
18.
19.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Page 2
Template Revision A