HP MSR93x Series User manual

HP MSR93X routers include：
Device Description
JG511A HP MSR930 Router
JG512A HP MSR930 Wireless Router
J G 513 A HP MSR930 3G Router
J G 514 A HP MSR931 Router
JG515A HP MSR931 3G Router
JG531A HP MSR931 Dual 3G Router
JG516A HP MSR933 Router
JG517A HP MSR933 3G Router
Device Description
JG518A HP MSR935 Router
JG519A HP MSR935 Wireless Router
JG520A HP MSR935 3G Router
JG596A HP MSR930 4G LTE/3G CDMA Router
JG665A HP MSR930 4G LTE/3G WCDMA Global Router
JG597A HP MSR936 Wireless Router
For more information about the installation, see HP MSR93X Routers Installation Guide.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.

Figure 2 Basic configuration wizard page
Figure 3 Setting WAN interface parameters
2

3. Click Next.
On the page as shown in Figure 4, you can perform the following
configurations:
Modify the IP address of VLAN-interface 1. Make sure VLAN-interface 1
and the interface of the hosts or devices that connect to the GE LAN
interface are on the same subnet.
Enable DHCP to assign IP addresses, gateway address, and DNS server
addresses to hosts or devices that connect to the GE LAN interface.
Figure 4 Setting LAN interface parameters
4. Click Next.
The page that displays basic configuration summary appears.
3