HP D9N46A User manual

HP Remote Monitoring Power Distribution Units (PDU) provide rack level power monitoring over the network. With billing grade accuracy
these PDUs are excellent choices for data centers wanting to make the most of circuit capacity or for co-location facilities needing to
precisely track power usage for billing purposes.
The low profile single piece design on these PDU's provides multiple mounting options and ease of access to rear devices for
maintenance. They are designed for HP racks but will also work in a large variety of third party racks as well using standard button and
keyhole mounting. They can be installed on either side of the rack with outlets facing the back of the rack for easy access and improved
clearance. Also for higher power density they can be installed side by side on both sides of the rack with the outlets facing in towards
the center of the rack. HP Remote Monitored PDUs are available in 1U and vertical form factors in single and 3-phase models and are
back by HP's limited 3-year warranty.
Monitored PDU, 1UModels (D9N46A shown) Monitored PDU, Half Height Models (D9N45A shown)
Monitored PDU, Mid Height Models (D9N47A/D9N48A shown) Monitored PDU, Full Height Models (D9N58A/D9N59A shown)
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Overview
DA - 14669 North America — Version 7 — May 9, 2014 Page 1

HP Remote Monitoring
Power Distribution Units
1U Models
HP 3.6kVA 200-240 Volt Detachable C20 Input (12xC13) WW Monitored PDU D9N46A
HP 4.9kVA 208 Volt L6-30 Input (12xC13) NA/JP Monitored PDU D9N44A
Half Height Models
HP 3.6kVA 200-240 Volt Detachable C20 Input (16xC13) WW Monitored PDU D9N45A
Mid Height Models
HP 4.9kVA 208 Volt L6-30 Input (20xC13/4xC19) NA/JP Monitored PDU D9N47A
HP 5.7kVA 208 Volt L21-20 3-Phase Input (18xC13/3xNEMA 5-20R) NA/JP Monitored
PDU
D9N52A
HP 8.6kVA 208 Volt L21-30 3-Phase Input (20xC13/3xC19/3xNEMA 5-20R) NA/JP
Monitored PDU
D9N53A
HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13/3xC19) NA/JP Monitored PDU D9N51A
Full Height Models
HP 8.3kVA 208 Volt CS8265C Input (30xC13/3xC19) NA Monitored PDU D9N49A
HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (30xC13/3xC19) NA Monitored PDU D9N61A
HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (24xC13/3xC19) NA/JP Monitored PDU D9N54A
HP 14.4kVA 208 Volt CS8365C 3-Phase Input (12xC13/12xC19)NA Monitored PDU D9N58A
HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (12xC13/12xC19) NA Monitored PDU D9N62A
HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (12xC13/12xC19) NA/JP Monitored PDU D9N59A
480/277 Volt Models
HP 19.9kVA 480 Volt 3-Phase (30 Outlet) NA Monitored PDU D9N63A
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Models
DA - 14669 North America — Version 7 — May 9, 2014 Page 2

Key Features List Remote power monitoring with billing grade 99% accuracy
Local or LDAP authentication
LCD Display on the PDU for local monitoring
Ultra-thin one piece design does not interfere with rear maintenance
1U and vertical form factors with flexible mounting options
Industry standard button and keyhole mounting of vertical models for easy drop in installation
Color coded load segment designations
Daisy chain up to 2 PDUs on the same IP address
Optional environment sensor measures temperature and humidity
Models range from 2.8kVA to 22kVA
Billing grade accuracy All HP Remote Monitoring PDUs meet IEC 62053-21, Class 1 standards for ±1% or better accuracy in power
monitoring of:
Amperage
Voltage
Wattage
Kilowatts per hour
A LCD screen on the HP Remote Monitored PDU provides local monitoring and local alert indications.
Remote monitoring and management is available via Telnet or a standard web browser.
Flexible Software Easy to use CLI and web interfaces
Local and LDAP security with multiple access levels
HTTP, HTTPS, Telnet/SSH protocols
IPv4 and IPv6 compatible
SNMPv1 and SNMPv3 compatible
Email alert notifications
User settable alert thresholds
Event logs
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Standard Features
DA - 14669 North America — Version 7 — May 9, 2014 Page 3

Multiple models for
flexible installation
The HP Remote Monitoring PDUs are available in four form factors for a variety of racks and environments.
All HP Remote Monitoring PDUs can be mounted to stay completely out of the critical rear maintenance
path needed to service IT equipment in the rack. All vertical models use industry standard button and
keyhole mounting for simple drop in installation in HP 11000 G2 and Intelligent Series racks and many
third party racks.
1U PDUs
Mounts in 1U of space in any EIA standard rack. Available in either a low voltage model with twelve NEMA
5-20 receptacles or high voltage models with twelve IEC C13 outlets.
Vertical PDUs
A variety of sizes meet the needs of many environments
Mounts vertically on either side in the rear of the rack using industry standard button and keyhole
mounting.
Standard mounting faces the outlet towards the rear of the rack. This configuration fully prevents
interference in the maintenance zone between rear RETMA rails.
Using the optional configuration of facing the outlets into the rack, multiple PDUs can be mounted
on one side of the rack for higher power density. *
NOTE: Facing the outlets into the rack will interfere with the lower few rack U spaces of the rear
maintenance zone due to breakers on the PDUs.
Vertical PDU Form Factors Half Height PDU
Designed to fit in 22U and taller racks
Up to 4 Half Height PDUs can be mounted in one side of a 42U or 47U rack using the optional
inward facing configuration.
Mid Height PDUs
Designed to fit in 36U and taller racks
New Three Phase Dual Voltage models provide three NEMA 5-20 convenience outlets for low
voltage equipment in high voltage racks.
Full Height PDUs
Designed for 42U and taller racks.
480V PDUs
Full height form factor for 42U and taller racks
480V three phase 5 wire input provides 277V single phase output.
Unique outlets prevent connection of non-277V compatible equipment.
NOTE: When mounted in the standard rear facing configuration only 1 Mid or Full Height PDU can be
mounted per side of the rack. Up to 2 Half Height PDUs can be mounted per side in the standard rear facing
configuration in a 42U or taller rack.
Environmental
monitoring
An optional environmental sensor attaches to the HP Remote Monitoring PDU and can measure air
temperature and humidity in the front or rear of the rack. The environmental senor will send alerts over
the network based on user defined thresholds.
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Standard Features
DA - 14669 North America — Version 7 — May 9, 2014 Page 4

Easy Installation and
compatibility
Standard button and keyhole mounting provides simple drop in installation in HP 11000 G2 Series racks,
Intelligent Series Racks, and many third party racks.
Warranty Upgrade
Options
HP Remote Monitoring PDUs are backed by a limited 3-year warranty.
HP Remote Monitoring PDUs automatically assume the Care Pack coverage level of any covered ProLiant
server in the same rack.
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Standard Features
DA - 14669 North America — Version 7 — May 9, 2014 Page 5

HP Care Pack Services Care Pack services provide a range of life cycle support options that let you choose the service levels that
meet your business requirements, from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7
days call window with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and
VMWare-based IT solutions helping to deliver high level of application availability. Response times
range from 30 mins for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution
NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or
resellers or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at:
http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Service and Support
DA - 14669 North America — Version 7 — May 9, 2014 Page 6

HP Environmental Sensor
for Remote Monitored
PDUs
HP Environmental Sensor for Remote Monitored PDUsThe HP Environmental Sensor
collets temperature and humidity information in the rack and can be monitored via the
local LCD display or remotely using Telnet or a standard web interface. The sensor can
also monitor the status of two user supplied contact devices.
E2D53A
Hot installable and hot swappable
User selectable alarm thresholds
Measure temperature from 32oF to 158oF (0oC to 70oC) with an accuracy of
±3.6oF (±2oC)
Measures relative humidity from 10% to 90% with an accuracy of ±5%
Supports normally open and normally closed contact devices
NOTE: The HP Environmental Sensor comes with a 6 foot RJ45-RJ45 cable and can be
mounted in various locations within the rack using the supplied Velcro strips or
mounting screw. RJ45 cables up to 30 feet (9.1m) long may be used.
NOTE: One environmental sensor may be installed per HP Remote Monitored PDU
HP Country specific C19
PDU Inlet Cords for
D9N45A and D9N46A
(required)
HP C19 - Nema L6-20P NA/JP 250V 20Amp High Voltage 3.6m Power Cord AF593A
HP C19 - NBR-14136 BR 250V 16Amp 2.5m Power Cord AF592A
HP C19 - GB-1002 CN 250V 16Amp 2.5m Power Cord AF584A
HP C19 - IS-1293 IN/PK/BD 250V 16Amp 2.5m Power Cord AF582A
HP C19 - ISI-32 IL 250V 16Amp 2.5m Power Cord AF583A
HP C19 - AS3112-3 AU/NZ 250V 15Amp 3.6m Power Cord AF577A
HP C19 - IEC-309 DK/SE/AR 250V 16Amp 3.6m Power Cord AF581A
HP C19 - CEE-VII EU 250V 16Amp 3.6m Power Cord AF576A
HP C19 - CEI-23-50 IT/CL 250V 16Amp 3.6m Power Cord AF580A
HP C19 - SABS-164 ZA 250V 16Amp 3.6m Power Cord AF579A
HP C19 - BS-1363/A UK/HK/SG 250V 13Amp 3.6m Power Cord 359615-031
HP 240 VAC 4.5M Unterminated End NA Power Cord E7806A
NOTE: Please refer to the Power Cord Matrix for more information on power cords/cable
part numbers, input/output descriptions: http://www.hp.com/go/powercordmatrix .
HP Jumper Cables HP C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord A0K03A
HP C13 - C14 WW 250V 10Amp 0.7m Jumper Cord 142257-B28
HP C13 - C14 WW 250V 10Amp 1.4m Jumper Cord 142257-006
HP C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord A0K04A
HP C13 - C14 WW 250V 10Amp 1.4m 15 pc Jumper Cord 142257-007
HP C13 - C14 WW 250V 10Amp 2.0m Jumper Cord A0K02A
HP C13 - C14 WW 250V 10Amp Flint Gray 2.0m Jumper Cord AF573A
HP C13 - C14 WW 250V 10Amp 2.5m Jumper Cord 142257-002
HP C13 - C14 WW 250V 10Amp 3.0m Jumper Cord 142257-003
HP C13 - C14 WW 250V 10A Gray 3.0m Jumper Cord A0K06A
HP C20 - C13 WW 250V 15Amp 2.0m Jumper Cord AF590A
HP C19 - C20 WW 250V 16Amp Flint Gray 1.20m Jumper Cord AF575A
HP C19 - C20 WW 250V 16Amp Flint Gray 2.0m Jumper Cord AF574A
HP C19 - C20 WW 250V 16Amp 2.5m Jumper Cord 295633-B22
HP 200-250V 10A C15 to C14 .76m Jumper Cable E7807A
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Related Options
DA - 14669 North America — Version 7 — May 9, 2014 Page 7

NOTE: Please refer to the Power Cord Matrix for more information on power cords/cable
part numbers, input/output descriptions: http://www.hp.com/go/powercordmatrix .
HP Mounting Brackets HP Vertical PDU 10K G2 Mounting Kit
NOTE: Allows HP Basic and Remote Monitored PDU vertical models to be mounted in HP
10000 G2 series racks and in the HP V142 rack. This bracket is not needed for mounting
in the HP 11000G2 or Intelligent Series racks. PDUs may interfere with the rear
maintenance zone when using these brackets.
H6L32A
HP 277 Volt options for
D9N63A
HP LS-26 to LS-25 277 Volt 15Amp AC 0.76m Jumper Cord TK801A
HP LS-26 to LS-25 277 Volt 15Amp AC 1.37M Jumper Cord TK802A
HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer H3X09A
NOTE: 720 watt, 2U transformer converts 277V to 230V for up to 4 devices.
NOTE: Cord lengths listed are total length including connectors
NOTE: Please refer to the Power Cord Matrix for more information on power cords/cable
part numbers, input/output descriptions: http://www.hp.com/go/powercordmatrix .
HP LS26 to LS-25 jumper cables are compatible with the following 94% efficient HP
Common Slot power supplies
HP 500W Common Slot 277VAC Hot Plug Power Supply Kit 717362-B21
HP 750W Common Slot 277VAC Hot Plug Power Supply Kit 717364-B21
HP 1200W Common Slot 277VAC Hot Plug Power Supply Kit 717359-B21
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Related Options
DA - 14669 North America — Version 7 — May 9, 2014 Page 8

Model Selection Matrix - HP Remote Monitored PDUs
HP Remote Monitoring PDUs 1U models
Model Part Number Input Circuit Current
Maximum
Load capacity Input
Connection
Output circuit
breakers
Outlet
Connections
2.8kVA PDU D9N43A 100-120V
30A
24A 2880VA
@120V
8ft(2.4m) cord
with attached
NEMA L5-30P
2 x 20A 12 x NEMA 5-
20R
3.6kVA PDU D9N46A 200-240V
16-20A
16A 3680VA
@230V
Detachable
input power
cord with an IEC
320-C20 inlet
on PDU *
n/a 12 x IEC C13
4.9kVA PDU D9N44A 200-240V
30A
24A 4992VA @208V 8ft(2.4m) cord
with attached
NEMA L6-30P
2 x 20A 12 x IEC C13
Half Height vertical models
Model Part Number Input Voltage Current
Maximum
Load capacity Input
Connection
Output circuit
breaker
Outlet
Connections
3.6kVA PDU D9N45A 200-240V
16-20A
16A 3680VA
@230V
Detachable
input power
cord with an IEC
320-C20 inlet
on PDU *
n/a 16 x IEC C13
Mid Height vertical models
Model Part Number Input Voltage Current
Maximum
Load capacity Input
Connection
Output circuit
breaker
Outlet
Connections
4.9kVA PDU D9N47A 200-240V
30A
24A 4992VA @208V 8ft(2.4m) cord
with attached
NEMA L6-30P
2 x 20A 20 x IEC C13
4 x IEC C19
7.3kVA PDU D9N48A 200-240V
32A
32A 7360VA @230V 8ft(2.4m) cord
with attached
IEC 332P6
Splashproof
2 x 16A 20 x IEC C13
4 x IEC C19
5.7kVA Dual
Voltage PDU
D9N52A 200-208V
20A
3 Phase WYE
27.7A 5764VA @208V
3 Phase
8ft(2.4m) cord
with attached
NEMA L21-20P
n/a 18 x IEC C13
3 x NEMA 5-20R
8.6kVA Dual
Voltage PDU
D9N53A 200-208V
30A
3 Phase WYE
41.5A 8646VA @208V
3 Phase
8ft(2.4m) cord
with attached
NEMA L21-30P
3 x 20A 18 x IEC C13
3 x IEC C19
3 x NEMA 5-20R
8.6kVA PDU D9N51A 200-208V
30A
3 Phase Delta
41.5A 8646VA @208V
3 Phase
8ft(2.4m) cord
with attached
NEMA 15-30P
3 x 20A 18 x IEC C13
3 x IEC C19
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Remote Monitoring PDU Family Information
DA - 14669 North America — Version 7 — May 9, 2014 Page 9

11kVA PDU D9N55A 380-415V
16A
3 Phase WYE
16A/phase 11040VA
@ 400V 3 Phase
8ft(2.4m) cord
with attached
IEC 516P6
Splashproof
n/a 18 x IEC C13
3 x IEC C19
Full Height vertical models
Model Part Number Input Voltage Current
Maximum
Load capacity Input
Connection
Output circuit
breaker
Outlet
Connections
7.3kVA PDU D9N50A 200-240V
32A
32A 7360VA @230V 8ft(2.4m) cord
with attached
IEC 332P6
Splashproof
2 x 16A 32 x IEC C13
4 x IEC C19
8.3kVA PDU D9N49A 200-240V
50A
40A 8320VA @208V 8ft(2.4m) cord
with attached
CS8265C
3 x 20A 30 x IEC C13
3 x IEC C19
11kVA PDU D9N57A 380-415V
16A
3 Phase WYE
16A/phase 11040VA
@ 400V 3 Phase
8ft(2.4m) cord
with attached
IEC 516P6
Splashproof
n/a 30 x IEC C13
3 x IEC C19
16.6kVA PDU D9N61A 380-415V
30A
3 Phase WYE
24A/phase 16560VA @
400V 3 Phase
8ft(2.4m) cord
with attached
IEC 532P6
Splashproof
6 x 20A 30 x IEC C13
3 x IEC C19
17.3kVA PDU D9N54A 200-208V
60A
3 Phase Delta
83.04A 17292VA @
208V 3 Phase
8ft(2.4m) cord
with attached
IEC 460P9
Splashproof
6 x 20A 24 x IEC C13
3 x IEC C19
22kVA PDU D9N56A 380-415V
32A
3 Phase WYE
32A/phase 22080VA @
400V 3 Phase
8ft(2.4m) cord
with attached
IEC 532P6
Splashproof
6 x16A 30 x IEC C13
3 x IEC C19
14.4kVA PDU D9N58A 200-208V
50A
3 Phase Delta
69.28A 14410VA @
208V 3 Phase
8ft(2.4m) cord
with attached
CS8365C
6 x 20A 12 x IEC C13
12 x IEC C19
16.6kVA PDU D9N62A 380-415V
30A
3 Phase WYE
24A/phase 16560VA @
400V 3 Phase
8ft(2.4m) cord
with attached
IEC 532P6
Splashproof
6 x 20A 12 x IEC C13
12 x IEC C19
17.3kVA PDU D9N59A 200-208V
60A
3 Phase Delta
83.04A 17292VA @
208V 3 Phase
8ft(2.4m) cord
with attached
IEC 460P9
Splashproof
6 x 20A 12 x IEC C13
12 x IEC C19
22kVA PDU D9N60A 380-415V
32A
3 Phase WYE
32A/phase 22080VA @
400V 3 Phase
8ft(2.4m) cord
with attached
IEC 532P6
Splashproof
6 x16A 12 x IEC C13
12 x IEC C19
480/277 Volt model
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Remote Monitoring PDU Family Information
DA - 14669 North America — Version 7 — May 9, 2014 Page 10

19.9kVA PDU D9N63A 480V 30A 3
Phase WYE
24A /phase 19944VA
@480V 3 Phase
8ft(2.4M) cord
with attached
NEMA L22-30P
6 x 20A 30 x RF203P-
HP
(LS-26)
* HP Remote Monitored PDU models D9N45A and D9N46A require an IEC 320-C19 to country specific plug inlet cord which is sold
separately.
NOTE: Please refer to the Power Cord Matrix for more information on power cords/cable part numbers, input/output descriptions.
http://www.hp.com/go/powercordmatrix .
Disclaimer: HP makes no recommendations regarding power connector manufactures. Please consult a licensed professional to
determine the best connector or receptacle for your specific needs.
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Remote Monitoring PDU Family Information
DA - 14669 North America — Version 7 — May 9, 2014 Page 11

All PDUs
Operational Temperature 50° to 140° F (10° to 60° C)
Operating Relative Humidity (%) 10% to 90%
Operating Elevation 0 to 10,000 ft (0 to 3048 m)
Storage Temperature -4° to 140° F (-20° to 60° C)
Storage Relative Humidity (%) 5% to 95%
Storage Elevation 0 to 30,000 ft (0 to 9144 m)
Input Plug Length (attached cord units) 96 inches (243.8 cm)
Conformance Standards UL, CUL, VCCI - NA/JPN models
CE, TUV, KC, EAC, KCC, ACMA - INTL models
UL, CUL, CE, TUV, KC, EAC, KCC, VCCI, ACMA - WW models
Mechanical Dimensions (WxHxD) - 1U models 17.25 x 1.71 x 6.16 in (43.8 x 4.34 x 15.65 cm)
Mechanical Dimensions (WxHxD) - Half Height
models
2.05 x 30 x 2.05 (5.2 x 76.2 x 5.2 cm)
Mechanical Dimensions (WxHxD) - Mid Height models 2.05 x 56.12 x 2.05in (5.2 x 142.54 x 5.2 cm)
Mechanical Dimensions (WxHxD) - Full Height models 2.05 x 66.59 x2.05 in (5.2 x 169.14 x5.2)
Kit Contents - All Remote Monitored PDUs All models ship with:
Mounting buttons or hardware
Tie wraps for cable retention
Shipping bracket (vertical models only)
6ft RJ45-RJ45 communications cable
6ft RJ45-DB9 Serial cable
Read me first card
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green . To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green . These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Technical Specifications
DA - 14669 North America — Version 7 — May 9, 2014 Page 12

© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
QuickSpecs
HP Remote Monitored Power Distribution Units (mPDU)
Technical Specifications
DA - 14669 North America — Version 7 — May 9, 2014 Page 13