NOTE:
NOTE:NOTE:
NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE:
NOTE:NOTE:
NOTE:
HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE:
NOTE:NOTE:
NOTE:
This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE:
NOTE:NOTE:
NOTE:
FIO indicates that this option is available only as a Factory Installable Option.
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade ConfigurationStep 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Models
ModelsModels
Models
HP ProLiant BL685c CTO Blade (North America)
405024-B21
One (1) embedded NC326i Dual Port Gigabit Server Adapter, two (2) embedded
NC373i Multifunction Gigabit Server Adapters, and one (1) additional 10/100
network adapter dedicated to iLO 2 Management
Integrated Smart Array E200i RAID controller
NOTE:
NOTE:NOTE:
NOTE:
Controller cache module selection is required. Select either the standard 64
MB module or the optional 128 MB module in step 2 below.
Two small form factor (SFF) SAS/SATA hot plug hard drive bays
Integrated Lights-Out 2 Standard Blade Edition
Step 2: Choose Required Options (one of the following from each list unless otherwise
Step 2: Choose Required Options (one of the following from each list unless otherwiseStep 2: Choose Required Options (one of the following from each list unless otherwise
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted):
noted):noted):
noted):
Processors
ProcessorsProcessors
Processors
For dual (2) processor configurations choose (one of the following):
For dual (2) processor configurations choose (one of the following):For dual (2) processor configurations choose (one of the following):
For dual (2) processor configurations choose (one of the following):
AMD Opteron™ processor Model 8222 (3.0 GHz, 95W) Option Kit, FIO Base
454907-L21
AMD Opteron processor Model 8220 (2.8 GHz, 95W) Option Kit, FIO Base
438820-L21
AMD Opteron processor Model 8218 (2.6 GHz, 95W) Option Kit, FIO Base
409613-L21
AMD Opteron processor Model 8216 (2.4 GHz, 95W) Option Kit, FIO Base
409612-L21
AMD Opteron processor Model 8214 (2.2 GHz, 95W) Option Kit, FIO Base
409611-L21
Low Power AMD Opteron processor Model 8218 HE (2.6 GHz, 68W), FIO Base
440936-L21
OR
OROR
OR
For quad (4) processor configurations choose (one of the following):
For quad (4) processor configurations choose (one of the following):For quad (4) processor configurations choose (one of the following):
For quad (4) processor configurations choose (one of the following):
AMD Opteron processor Model 8222 (3.0 GHz, 95W) Option Kit, FIO Base
454907-L21
AMD Opteron processor Model 8220 (2.8 GHz, 95W) Option Kit, FIO Base
438820-L21
AMD Opteron processor Model 8218 (2.6 GHz, 95W) Option Kit, FIO Base
409613-L21
AMD Opteron processor Model 8216 (2.4 GHz, 95W) Option Kit, FIO Base
409612-L21
AMD Opteron processor Model 8214 (2.2 GHz, 95W) Option Kit, FIO Base
409611-L21
Low Power AMD Opteron processor Model 8218 HE (2.6 GHz, 68W) Option Kit,
FIO Base
440936-L21
Plus (one of the following):
Plus (one of the following):Plus (one of the following):
Plus (one of the following):
AMD Opteron processor Model 8222 (3.0 GHz, 95W) Option Kit
454907-B21
AMD Opteron processor Model 8220 (2.8 GHz, 95W) Option Kit
438820-B21
AMD Opteron processor Model 8218 (2.6 GHz, 95W) Option Kit
409613-B21
AMD Opteron processor Model 8216 (2.4 GHz, 95W) Option Kit
409612-B21
AMD Opteron processor Model 8214 (2.2 GHz, 95W) Option Kit
409611-B21
QuickSpecs
HP ProLiant BL685c Server Blade
HP ProLiant BL685c Server BladeHP ProLiant BL685c Server Blade
HP ProLiant BL685c Server Blade
Configuration Information - Factory Integrated Models
DA - 12576 Worldwide — Version 23 — December 15, 2008
Page 15