HP NetServer AA 4000 User manual

HP NetServer AA
Solution Messages
HP Part Number 5969-5966
Printed in September 2000

Notice
ii
The information contained in this document is subject to change without notice.
Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose.
Hewlett-Packard shall not be liable forerrors contained hereinor forincidental orconsequential
damages in connection with the furnishing, performance, or use of this material.
Hewlett-Packard assumes no responsibility for the use or reliability of its software on
equipment that is not furnished by Hewlett-Packard.
This document contains proprietary information that is protected by copyright. All rights are
reserved. No part of this document may be photocopied, reproduced, or translated to another
language without the prior written consent of Hewlett-Packard Company.
TRADEMARK NOTICE
Assured Availability, ComputeThru, Computing for the long run, Constant Computing,
Endurance, Marathon Assured, MIAL, SplitSite, and the Marathon logo are either registered
trademarks or trademarks of Marathon
Technologies Corporation in the United States and/or other countries.
BackOffice, the BackOffice logo, Microsoft, MS-DOS, Windows, and Windows NT are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries.
All other brands and product names are trademarks of their respective companies or
organizations.
Software Revision
The revision of the Endurance software that this document supports is Revision 3.0.1–SP.EA.

iii
Contents
Preface
Chapter 1 — Introduction
Examining the Windows NT Event Log . . . . . . . . . . . . . . . . . . . . . 3
HP NetServer AA Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Format of HP NetServer AA Messages . . . . . . . . . . . . . . . . . . . 5
HP NetServer AA Message Categories and Conventions. . . . . . . . . . 6
Message Reporting Sources . . . . . . . . . . . . . . . . . . . . . . . . 7
Message Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Message Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 2 — MIC BIOS Messages
Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
MIC BIOS Message Summary. . . . . . . . . . . . . . . . . . . . . . . . . 45
MIC BIOS Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Chapter 3 — Installation and Verification Procedure (IVP) Messages
Types of Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
IVP Message Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
IVP Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Chapter 4 — MtcCEX Messages
MtcCEX Message Summary. . . . . . . . . . . . . . . . . . . . . . . . . . 70
MtcCEX Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Chapter 5 — MtcDgs Messages
IOPn.MtcDgs Status Message Summary . . . . . . . . . . . . . . . . . . . 90
IOPn.MtcDgs Status Messages . . . . . . . . . . . . . . . . . . . . . . . . 91
Chapter 6 — MtcDsl Messages
IOPn.MtcDsl Status Message Summary. . . . . . . . . . . . . . . . . . . . 96

Contents
iv
IOPn.MtcDsl Status Messages. . . . . . . . . . . . . . . . . . . . . . . . . 98
Chapter 7 —MtcEthP and MtcEtx Messages
IOPn.MtcEthP and IOPn.MtcEtx Message Summary . . . . . . . . . . . . . 112
IOPn.MtcEthP Status Messages. . . . . . . . . . . . . . . . . . . . . . . . 115
IOPn.MtcEtx Status Messages. . . . . . . . . . . . . . . . . . . . . . . . . 130
Chapter 8 —MtcEvtP Messages
IOPn.MtcEvtP Status Message Summary . . . . . . . . . . . . . . . . . . . 138
IOPn.MtcEvtP Status Messages . . . . . . . . . . . . . . . . . . . . . . . . 140
Chapter 9 —MtcFLOP and MtcFLOR Messages
IOPn.MtcFLOP and MtcFLOR Status Message Summary. . . . . . . . . . . 146
IOPn.MtcFLOP Status Messages . . . . . . . . . . . . . . . . . . . . . . . 147
MtcFLOR Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Chapter 10 —MtcIopDm Messages
MtcIopDm Status Message Summary . . . . . . . . . . . . . . . . . . . . . 154
IOPn.MtcIopDm Status Messages . . . . . . . . . . . . . . . . . . . . . . . 155
Chapter 11 —Keyboard and Pointer (MtcKmP) Messages
Keyboard and Pointer Message Summary. . . . . . . . . . . . . . . . . . . 158
Keyboard and Pointer Redirector Messages. . . . . . . . . . . . . . . . . . 160
IOPn.MtcKmP Status Messages. . . . . . . . . . . . . . . . . . . . . . . . 163
Chapter 12 —MtcMICX Messages
IOPn.MtcMICX Message Summary . . . . . . . . . . . . . . . . . . . . . . 170
IOPn.MtcMICX Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Chapter 13 —MtcMon Messages
IOPn.MtcMon Message Summary . . . . . . . . . . . . . . . . . . . . . . . 180
IOPn.MtcMon Fault Handler Status Messages . . . . . . . . . . . . . . . . 190
IOPn.MtcMon FRU Messages . . . . . . . . . . . . . . . . . . . . . . . . . 201
IOPn.MtcMon Status Messages . . . . . . . . . . . . . . . . . . . . . . . . 213

v
Contents
Chapter 14 —MtcScsiP and MtcScsiR Messages
MtcScsiP and MtcScsiR Status Message Summary. . . . . . . . . . . . . . 294
IOPn.MtcScsiP Status Messages . . . . . . . . . . . . . . . . . . . . . . . 302
IOPn.MtcScsiR Status Message. . . . . . . . . . . . . . . . . . . . . . . . 352
Chapter 15 —MtcSmR Messages
IOPn.MtcSmR Status Message Summary. . . . . . . . . . . . . . . . . . . 354
IOPn.MtcSmR Status Messages. . . . . . . . . . . . . . . . . . . . . . . . 355
Chapter 16 —MtcVidP Messages
MtcVidP Status Message Summary . . . . . . . . . . . . . . . . . . . . . . 358
IOPn.MtcVidP Status Messages. . . . . . . . . . . . . . . . . . . . . . . . 359
Chapter 17 —MtcVnP Messages
IOPn.MtcVnP Status Message Summary . . . . . . . . . . . . . . . . . . . 364
IOPn.MtcVnP Status Messages . . . . . . . . . . . . . . . . . . . . . . . . 365
Chapter 18 —Endurance Manager Messages
Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370
Endurance Manager Message Summary . . . . . . . . . . . . . . . . . . . 370
Endurance Manager Messages . . . . . . . . . . . . . . . . . . . . . . . . 372

Contents
vi

vii
Tables
1-1 Event Log Icons and Severity Levels . . . . . . . . . . . . . . . . . . . . . . . . . 5
1-2 Message Reporting Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1-3 Message Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1-4 HP NetServer AA Message Summary –Unprefixed Messages . . . . . . . . . . . . 9
1-5 HP NetServer AA Message Summary –Prefixed Messages . . . . . . . . . . . . 14
2-1 MIC BIOS Message Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3-1 Message Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
4-1 MtcCEX Message Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
5-1 IOPn.MtcDgs Status Message Summary . . . . . . . . . . . . . . . . . . . . . . 90
6-1 IOPn.MtcDsl Message Summary . . . . . . . . . . . . . . . . . . . . . . . . . . 96
7-1 IOPn.MtcEthP and IOPn.MtcEtx Message Summary . . . . . . . . . . . . . . . . 112
8-1 IOPn.MtcEvtP Status Message Summary . . . . . . . . . . . . . . . . . . . . . . 138
9-1 IOPn.MtcFLOP and IOPn.MtcFLOR Status Message Summary . . . . . . . . . . 146
10-1 MtcIopDm Status Message Summary . . . . . . . . . . . . . . . . . . . . . . . . 154
11-1 Keyboard and Pointer Message Summary . . . . . . . . . . . . . . . . . . . . . . 158
12-1 IOPn.MtcMICX Message Summary. . . . . . . . . . . . . . . . . . . . . . . . . 170
13-1 IOPn.MtcMon Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
14-1 MtcScsiP and MtcScsiR Status Message Summary . . . . . . . . . . . . . . . . . 294
15-1 IOPn.MtcSmR Status Message Summary . . . . . . . . . . . . . . . . . . . . . . 354
16-1 MtcVidP Status Message Summary . . . . . . . . . . . . . . . . . . . . . . . . . 358
17-1 IOPn.MtcVnP Status Message Summary . . . . . . . . . . . . . . . . . . . . . . 364
18-1 Endurance Manager Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . 370

Tables
viii

ix
This guide lists and describes all HP NetServer AAserver messages.
Audience
This guide is written for experienced network administrators and technical personnel
responsible for installing, configuring, administering, and managing network server hardware
and software, including MicrosoftWindows NT, as well as all users of HP NetServer AA
servers.
Documentation Set
The HP NetServer AA documentation set includes:
•HP NetServer AA Solution Installation Guide that describes how to install your HP
NetServer AA server.
•HP NetServer AA Solution Administrator’s Guide that describes the HP NetServer AA
server and its related applications. This guide also includes information about how to
monitor and manage your HP NetServer AA server.
•HP NetServer AA Solution Messages that describes all HP NetServer AA messages.
Endurance Messages is not shipped in printed form. It is only available online using the
HP NetServer AA CD.
•HP NetServer AA 6200 Solution Release Notes (Release 3.0 Service Pack 1) that
describes release-specific information, including installation requirements, operational
information, and known product limitations that are not documented elsewhere in the HP
NetServer AA documentation set. You should read the Release Notes before installing and
using the HP NetServer AA server.
•HP NetServer AA Solution Upgrade/Downgrade Procedures (Release 3.0 Service Pack 1)
that describes the procedures for upgrading and downgrading an operational HP
NetServer AA server. This information is available online using the HP NetServer AA CD
as well as on the Marathon Customer Support Web site.
All the documentation is available online using the HP NetServer AA CD that was shipped with
your HP NetServer AA kit.
Preface

Preface
x
Conventions
The following conventions are used in the HP NetServer AA documentation set:
Unless noted otherwise, all cross-references are to chapters and pages within this book.
For Customer Support and Warranty Information
Refer to the Warranty & Support for Your HP NetServer booklet supplied with your NetServer
for information relating to warranty or customer support.
Convention Description
Italics,
Courier font
Indicates a variable that you replace in a path name or command
Bold, Courier
font
Indicates actions or commands that you must type. For example, type A:\ETX
Courier font Represents examples of screen text. For example, scsiid = 0, 1.
Bold Is used to:
•Emphasize important information.
•Indicate menu, pathname, or button selections.
•Indicate actions you perform.
Italics Is used to:
•Highlight the state of the HP NetServer AA server component.
•Refer to manual, chapter, or section titles.
Blue text (Available only in online documentation.) Indicates a hyperlink (cross-reference to
another section of the HP NetServer AA documentation set). Clicking on the link takes
you to the appropriate place in the documentation set.
Caution Is used to indicate procedures you should not perform or situations you should avoid in
order to avoid personal injury.
Warning Is used to indicate procedures or actions that could cause file or data corruption, loss of
data, or damage to server components.

1
This chapter describes the basics about HP NetServer AA server messages, including:
•Messages that are logged to the Windows NT System Event Log
•Messages that display in a Windows NT blue screen on a monitor attached to the CE
either as the CE operating system is booting or when a CE is being deconfigured
•Messages that display on the BIOS screen or the Windows NT blue screen during the boot
process or CE resynchronization process
•Messages that display in a pop-up window while the HP NetServer AA Manager is in use
•Messages that display in the HP NetServer AA Manager’s GUI display
This chapter assumes that you are familiar with HP NetServer AA terminology and the
Windows NT process of reporting messages in the Event Viewer.
Some proceduresin thismanual refer to maintenanceprocedures, such asshutting down an IOP,
a CE, or the CE operating system. Other procedures refer to hardware maintenance procedures,
such as replacing a hardware component of the HP NetServer AA server.
Warning: To avoid unintentionally removing your HP NetServer AA server
from service or causing damage to any HP NetServer AA
components, follow the detailed maintenance procedures in
Chapter 9 of HP NetServer AA Solution Administrator’s Guide.
1 Introduction

Chapter 1 Introduction
2
This chapter contains the following sections:
Examining the Windows NT Event Log . . . . . . . . . . . . . . . . 3
HP NetServer AA Messages . . . . . . . . . . . . . . . . . . . . . . 4
Format of HP NetServer AA Messages . . . . . . . . . . . . . . . . 5
HP NetServer AA Message Categories and Conventions . . . . . . . 6
Message Reporting Sources . . . . . . . . . . . . . . . . . . . . . . 7
Message Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Message Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3
Chapter 1 Introduction
Examining the Windows NT Event Log
To open the Windows NT Event Log, from the Task bar, select Start Programs
Administrative Tools (Common) Event Viewer. When the application launches, from the
Log menu, select System, since nearly all HP NetServer AA events are written to this log.
Use the Event Viewer’s menus to select various parameters that control how you will view
events.
•From the Log menu, select the computer for which to view logs, to save logs, or to open
previously saved logs.
•From the View menu, you can choose to view all events, or you can choose various filters.
You can also perform searches, select the order in which events are displayed, and view
details about events.
After selecting these log setting parameters, use the Event Viewer to examine HP NetServer AA
system events, just as you would view any other system events.
For detailed information about the Windows NT Event Viewer, refer to the Windows NT
documentation.

Chapter 1 Introduction
4
HP NetServer AA Messages
When it is operational, HP NetServer AA software continuously monitors the HP NetServer AA
server. It reports all status and error messages in a variety of ways:
•By logging them to the Windows NT Event log
•By displaying them on a monitor attached to the CE either as the CE operating system is
booting or synchronizing, or when a CE is being removed
•By displaying them in a pop-up window while the HP NetServer AA Manager is in use
•By displaying them in the HP NetServer AA Manager’s GUI display
You can view messages logged in the Windows NT event log using either:
•Windows NT Event Viewer, that displays the messages reported to the Windows NT
operating system, including the HP NetServer AA messages that are logged
•MTCLOG, an HP NetServer AA event log utility, that displays HP NetServer AA
messages that are logged as they are being written
Logged HP NetServer AA messages are written to the Windows NT event log as follows:
•Each IOP’s Windows NT Event log contains the messages that were generated by that
IOP. For example, IOP1 contains any messages generated by IOP1.
•The CE’s Windows NT Event log contains both CE messages and the messages that are
logged by each IOP. The IOP messages are logged to the CE’s Event log as follows:
- If a CE is not active (for example, has not completely booted), the IOP messages are
stored in a buffer on the IOP and sent to the CE when it becomes available. An IOP
message buffer can store up to 75 messages.
- When any CE becomes active, the CE uploads the messages from the IOP message
buffers, and writes those messages into the CE’s Event log.

5
Chapter 1 Introduction
Because of this message logging process, in the CE Event Viewer, the timestamp
information for messages logged by the IOPs is the time that the CE received the message;
it does not necessarily indicate the time that the message occurred on the IOP. To confirm
the time that the message occurred, check the event logs on the IOPs.
In the CEEvent Viewer,the messageIOPn.MtcMon status: The boot process has
completed for CE1 indicates the CE started uploading any IOP events. Any subsequent
messages were received from the IOPs without delay.
Format of HP NetServer AA Messages
HP NetServer AA messages use the standard Windows NT message format. HP NetServer AA
messages are reported using the icons and severity levels described in Table 1-1.
Table 1-1Event Log Icons and Severity Levels
Severity Level Description
Informational Informational messages are the least severe and do not require action.
Examples of informational messages include:
•Reporting benign state changes
•Reporting commands as they are issued
•Reporting completion status of user-initiated processes
Warning Warning messages may require attention. A continued series of warning
messages merits review to see if corrective action is required.
Examples of warning messages include:
•Packet transfer errors
•Potential resource allocation issues
•Issuing invalid commands
Error Error messages are the most severe and require immediate attention. In
some cases an error message reports a serious state change or transition
that may have resulted in the HP NetServer AA server being in a
vulnerable state or possibly out of service.
Examples of error messages include:
•Serious hardware and software failures, such as unavailable disks
•Power supply failures
•Windows NT operating system failures
•HP NetServer AA server interconnect path failures

Chapter 1 Introduction
6
When troubleshooting an HP NetServer AA server, check the event logs for HP NetServer AA
messages that start with or .
Because the HP NetServer AA server uses standard event reporting, you can integrate standard
notification applications (for example, paging devices and third-party software) to notify you
when a fault occurs.
For a detailed listing of HP NetServer AA messages, refer to subsequent chapters in this manual.
HP NetServer AA Message Categories and Conventions
The documentation for the HP NetServer AA server messages is presented as follows:
•Commands are referenced by the syntax that the HP NetServer AA Manager GUI
displays.
•Within chapters and categories, messages are listed alphabetically.
•When applicable, a message is documented using the following:
-MessageText
- Variables (including their descriptions)
- Severity (either Informational, Error, or Warning)
- Description
- Related Messages
- Hardware/Software
- Action
•The Action section highlights corrective steps. While these steps appear as bulleted lists,
they are procedural steps and should be completed in the order that they are documented.
If the corrective steps do not resolve the condition (or if an Action section is not included
for a message), contact your service provider for assistance.
•In addition to the standard document convention, italics are used in message text to
indicate variables. For example, when a message reports IOP1 or IOP2, the variable IOPn
is used.

7
Chapter 1 Introduction
Message Reporting Sources
Table 1-2 lists the sources that report the HP NetServer AA messages.
Table 1-2Message Reporting Source
Reporting Source Message Prefix Reports . . . Refer to
FloR MtcFloR status Floppy Redirector messages Chapter 9
MtcBIOS None MIC BIOS messages, displayed during the
Windows NT boot and synchronization
process
Note: These messages are not written to the
Windows NT Event Log.
Chapter 2
MtcCEX IOPn.MtcCEX CE transport driver messages, occurring
during the CE boot process or when a CE is
being removed.
Note: These messages are not written to the
Windows NT Event Log.
Chapter 4
MtcDgs IOPn.MtcDgs status Datagram Service messages Chapter 5
MtcDsl IOPn.MtcDsl status Device Synchronization Layer messages Chapter 6
MtcEthP IOPn.MtcEthP status IOP Ethernet subsystem messages that
occur between the IOP and the public
Ethernet
Chapter 7
MtcEtx IOPn.MtcEtx status Ethernet transmit subsystem messages that
relate to the IL (the IOP Link) Chapter 7
MtcEvtP IOPn.MtcEvtP status IOP Event subsystem messages Chapter 8
MtcFloP IOPn.MtcFloP status Floppy Provider messages Chapter 9
MtcIopDm IOPn.MtcIopDm status Disk Monitor messages Chapter 10
MtcIVP None Installation and verification messages
displayed during Windows NT boot Chapter 3
MtcKmP IOPn.MtcKmP status Keyboard/Pointer Provider messages Chapter 11
MtcKMR None Keyboard/Mouse Redirector messages Chapter 11
MtcMICX IOPn.MtcMICX status Marathon Interface Card Transport driver
(MICX) messages Chapter 12

Chapter 1 Introduction
8
Message Variables
If you cannot locate a message as it is reported, try referencing the message using a variable.
You can also search for a string within the message using Acrobat Reader. Message variables
include:
MtcMon IOPn.MtcMon Fault
Handler status
IOPn.MtcMon FRU
IOPn.MtcMon status
HP NetServer AA system control messages Chapter 13
MtcScsiP IOPn.MtcScsiP status SCSI Provider messages Chapter 14
MtcScsiR None SCSI Redirector message that is logged
only in the CE event log Chapter 14
MtcSmR IOPn.MtcSmR status HP NetServer AA Manager messages Chapter 15
MtcVidP IOPn.MtcVidP status Video Provider messages Chapter 16
MtcVnP IOPn.MtcVnP status Virtual Network Provider messages Chapter 17
MtcCons, MtcMgr None HP NetServer AA Manager messages Chapter 18
Table 1-3Message Variables
Variable Description
CEx
CEy
A CE identifier. Either CE1 or CE2.
destIOP The IOP that is the destination of a mirror set copy. Either IOP1 or IOP2.
driver_name The name of a driver. See specific message for more information.
ESIx
ESIy
An ESI (HP NetServer AA System Interconnect) identifier. Either ESI 11, ESI 12,
ESI 21, or ESI 22.
IOPn
IOPxThe IOP that reported the message. Either IOP1 or IOP2.
Table 1-2Message Reporting Source (Continued)
Reporting Source Message Prefix Reports . . . Refer to

9
Chapter 1 Introduction
Message Summary
Table 1-4 and Table 1-5 list all HP NetServer AA messages in alphabetical order. The
unprefixed messages appear in Table 1-4, and the prefixed messages appear in Table 1-5. Use
the hot links to jump to the message documentation, with complete information about a
message.
logDevName A logical device name. A logical device name is an abstract representation of the
mirrored drives that comprise a mirrored disk set.
For example, for two physical disks that comprise a mirror set at physical SCSI
settings 0-0-1-0 (IOP1 disk at SCSI settings (0-0-1-0) and IOP2 disk at SCSI settings
(0-0-1-0)), the logical device name is Disk0; the next mirror set would have a logical
device name of Disk1.
MICxA Marathon Interface Card (MIC) identifier.
offendingValue The offending value. This field displays the invalid value that was detected. See the
message description for details.
phyDevName A physical device name. A physical device comprises one half of a mirror set. A
mirror set requires two SCSI devices, one on each IOP. An example of a physical
device name is: Disk (0-0-1-0).
provName The provider name. A provider is a software entity that provides some service. For
example, a SCSI provider provides access to SCSI devices, and an Ethernet provider
provides access to Ethernet devices.
sourceIOP The source IOP. The IOP that is the source of a mirror set copy. Either IOP1 or IOP2.
TuplexA tuple identifier. Either Tuple 1 or Tuple 2.
xSee Variable description for details.
ySee Variable description for details.
Table 1-4HP NetServer AA Message Summary –Unprefixed Messages
Message Page
A critical error occurred initializing the Keyboard Pointer Redirector. page 160
A datatype entry in the MTCSMAPI.DLL contains incorrect data. page 373
Table 1-3Message Variables (Continued)
Variable Description

Chapter 1 Introduction
10
A field entry in the MTCSMAPI.DLL contains incorrect data. page 373
A function entry in the MTCSMAPI.DLL contains incorrect data. page 373
A non-critical error occurred initializing the Keyboard Pointer Redirector. page 161
A provider entry in the MTCSMAPI.DLL contains incorrect data. page 373
A provider entry in the MTCSMAPI.DLL contains incorrect target data. page 374
A required parameter is missing. page 374
An action entry in the MTCSMAPI.DLL contains incorrect data. page 374
An enumeration entry in the MTCSMAPI.DLL contains incorrect data. page 374
An internal error has occurred in the Retrieval library. page 372
An invalid parameter was provided by the caller. page 372
Automatic reboot in x seconds. page 47
Beginning boot process with IOPx. . . page 47
Beginning synchronization with CEy via IOPx. . . page 47
Confirm: Changes made to MIC settings have not been saved. Press <Esc> to return to
setup; press <Enter> to exit. page 48
Confirm: The selected test mode will run on exit in place of system startup. Press <Esc> to
return to setup; press <Enter> to continue with exit. page 48
Could not connect to the Endurance System Management Redirector. page 374
Could not perform request. An invalid action, target, or operation was specified. page 374
Could not perform request. An invalid action was specified. page 375
Could not perform request. An invalid CE was specified. page 375
Could not perform request. An invalid device or element was specified. page 375
Could not perform request. An invalid IOP was specified. page 375
Could not perform request. An invalid operation was specified. page 375
Could not perform request. An invalid option was specified. page 375
Could not perform request. The IOP or CE element number is required. page 375
Table 1-4HP NetServer AA Message Summary –Unprefixed Messages (Continued)
Message Page