HTC Touch Dual HTC Touch Dual Firmware update

HTC Touch (Bell) Software Installation
Note: Before running the RUU, back up any personal data from the Mobile Device to the
computer first using ActiveSync.
1. On the Welcome Screen, click Next to begin the ROM update installation.

2. On the next screen, follow the listed instructions in the dialog box first. When you are
done, click Next to proceed.
Note: You should read and follow all the instructions listed before clicking Next.
3. The following message will then be displayed, indicating that the utility is verifying
and acquiring information about the device as preparation for the update process.
Wait for this verification process to finish.

4. Current information about the device, such as the model ID, image version and
language will then be displayed. Click Update to proceed.
5. Below the device information, information about the new ROM update will then be
displayed. If you are certain that you want to install the Mobile Device with the new
ROM update, click Next to proceed.

6. A confirmation message then appears and shows the length of time it will take to
copy the necessary files (including radio image) to the device. Click Next to begin the
update.
A progress bar will run through the screen during the update process.
Note: In the middle of the update process, the progress bar may stop running. This is
normal as the RUU is adjusting itself to complete the update process automatically.

7. When you see the screen below, it means update is complete. Click Finish to exit the
utility.