Huawei E960 HSDPA User manual

HUAWEI E960 HSDPAWireless Gateway Quick Start
The HUAWEI E960 supports HSDPA/WCDMA 2100, GSM/GPRS/EDGE 1900/1800/900/850,
and network auto-switch. With the E960, you can experience wireless gateway and USB modem
at any time and any place.
E960 Appearance
Mode
Reset
Power
Interface Ethernet Phone
Power
WLAN Signal
ON/OFF
yPower Interface: When connected with the power adapter, the E960 functions as a wireless
gateway.When connected to the PC with a USB data cable, the E960 functions as a USB
modem.
yEthernet: Insert a Ethernet cable connected to the PC or other network equipments.
yPhone: Insert a phone cable connected with a telephone to realize the voice service.
yPower: Power indicator. When it is in yellow, the charge is finished.
yWLAN: WLAN indicator. If it is steady on and in yellow, the WLAN is enabled. If it is
blinking, data is transmitting.
yON/ OFF: Press and hold to power on or off the E960.
ySignal: Signal strength indicator. The following table shows the status of the signal strength
indicator:
Status Description Status Description
Fast blinking in
red No SIM card or unverified PIN code Steady on in yellow Signal strength in level two or three (middle)
Steady on in red Signal strength in level
one (weak) Steady on in green Signal strength in level four or five (strong)
yMode: The network mode indicator. The following table shows the status of the network mode
indicator:
Status Description Status Description Step 5: Log in to the Wireless Gateway Web Management
1. Open the Internet Explorer, and then enter the default web address (192.168.1.1) of the E960
in the address bar.
Double blinkin
in green g GESearching the network or no network Blinking in blue Normal GPRS/ED network 2. In the WIRELESS GATEWAY LOGIN page, select the user type, enter the password, and
then click
Steady on and
in green GPRS/EDGE data service connected Fast blinking in green Downloading the upgrade mode .
2Admin: Have the rights the view and modify
the configurations, and the default password
is admin;
Blinking in blue Normal WCDMA network Indicator off Off
Steady on in
blue WCDMA data service connected Steady on in cyan HSDPA data service connected User: Only view the basic information, and
the default password is user.
3
yReset: Reset n the side of the E960. Press and hold it for more than five seconds tobutton. O
restore the factory defaults. Only one user can log in to the E960
management page at one time, which is to
prevent the configuration conflict.
PC Configuration Requirements
The recommended PC configurations for using the E960 are as follows:
LCD resolution: 800*600 or above, recommended 1024*768.
0 or above, Firefox 1.5 or above, Netscape 8.0 or above
Note: If the configurations of the PC are lower than the recommended, the performance of the
ed.
yCPU: Pentium 500 MHz or above 43. If you are prompted to enter the PIN code, you need to enter the correct PIN code, and then
click
yMemory: 128 MB RAM or above .
yHard disk: 50 MB available space
yOperating System: Windows 2000, Windows XP, or Windows Vista
Note: yyIf the correct PIN code or PUK code is invalid, you cannot use the network-related
services.
yInterface: standard USB interface
yInternet Explorer: IE6. yPlease consult your service provider about whether to use SIM/USIM card.
Plug in the USB end of the power adapter to the power interface
of the E960, and plug in the power plug to the power socket.
Please use the E960 compatible power adapter; otherwise, the
E960 can be damaged.
Step 2: Install the
yYour service provider provides the SIM/USIM card. For more information about
SIM/USIM card, please consult your service provider.
Power Adapter
E960 may be weaken
1
Step 3: Connect The Ethernet cable cannot be longer than 100 meters. For better
effect, please use the shielded cable.
Step 1: Insert the SIM Card to the PC
Insert the SIM card into the socket with
the golden contact facing upward. Insert
the card socket into the E960.
Step 4: Connect The telephone cable cannot be longer than three meters, and the
telephone can be connected with three extensions.
to the Telephone Step 6: Making the First Call

When the PIN code is verified, you can use the telephone to make a voice call by lifting the
handset and dialing the number. Using the User Guide of the E960
3. If the PPP Connection is Manual, you need to click to connect the network.
Otherwise, the system automatically connects the network. The electrical version of the E960 User Guide is compressed in the installation program of the
Mobile Partner.
4. If the mode indicator of the E960 blinks, the connection is successful and you are online.
Step 7: Connect to the Internet Using the USB Modem Function Quickly You can view the E960 Wireless Gateway User Guide and Mobile Partner User Guide through
the Online Help of the Mobile Partner, or in the optical drive path of the E960.
1. Click , select , and then click . Enter the parameters and click In USB modem mode, you can perform wireless online, SMS, and phone book. However, the
gateway functions cannot be used, such as voice service and dial-up through the Ethernet.
. The system automatically configures the new parameters.
1. Double-click to enter the main interface.
2. Choose Help > Online Help, you can use the E960 user guide, as shown in the following
figure.
1. Press and hold to power off the E960.
2. Unplug the USB end of the power adapter from the E960.
3. Connect the E960 and PC with a compatible USB data cable. The sketch map for the data
cable is shown in the following picture:
Auxiliary USB
data cable
USB connector
Mini-USB data cable
2. Click , select the value in Profile Setting and PPP Connection, and then click
. Note: The auxiliary USB data cable is for additional power supply. Ensure that all connectors of
the USB data cable are plugged in the corresponding interfaces. Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China
Tel: [phone] Global Hotline: [phone] E-mail: [email protected]
4. The system automatically recognizes the new hardware, and displays on the lower
right of the desktop. The E960 and the PC are connected successfully. Website: www.huawei.com
Copyright © 2007 Huawei Technologies Co., Ltd.
5. After connecting the E960 and the PC, the Mobile Partner installation program of the E960
starts automatically.You can follow the installation wizard to operate. , HUAWEI are trademarks of Huawei Technologies Co., Ltd.
The figure is for your reference only
Note: If the program is not started, you can enter the optical drive path of the E960, double-click
the disk icon or right-click it, and then select open. Double-click the AutoRun.exe file, the
installation program starts. Do not plug or unplug the E960 in the installation process.
The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure
accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind,
express or implied.
6. After successful installation, the management program starts automatically, and the shortcut
icon is displayed on the desktop.
7. Enter the Mobile Partner, and you can perform the applications such as wireless accessing
the Internet, SMS, email, and phone book.