Huawei E510 User manual

Huawei Industrial Base, Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: www.huawei.com
Quick Start
HUAWEI E510 HSPA/DVB-T USB Modem
Huawei Technologies Co., Ltd.

Copyright © 2008 Huawei Technologies Co., Ltd.
All Rights Reserved
No part of this document may be reproduced or transmitted in any form or by any means without
prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their
respective holders.
Notice
The information in this document is subject to change without notice. Every effort has been made in
the preparation of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute the warranty of any kind,
express or implied.

i
Table of Contents
Getting to Know the E510.................................................................................................. 1
Requirements for the PC..................................................................................................... 4
Preparing the E510............................................................................................................. 5
Installation Guide ............................................................................................................... 7
Safety Information..............................................................................................................9

1
Thank you for purchasing Huawei E510 HSPA/DVB-T USB
Modem.
Note:
This manual briefly the preparation, the process for installing/uninstalling, and safety
precautions for using Huawei E510 HSPA/DVB-T USB Modem (hereinafter referred to as the
E510).
You are recommended to read the manual before using the E510.
Getting to Know the E510
The following figures show the appearance of the E510. The actual product may differ.
12
4
3
5

2
Internal Antenna
You can pull out the internal antenna as shown in the following figure. To receive stronger signals,
you can adjust the direction of the internal antenna.
1
2
Mini-USB interface
You can connect the mini-USB connector of the USB extension cable to the mini-USB interface.
USIM/SIM card slot
Holds the USIM/SIM card.

3
External antenna interface
Connects an external antenna. You can pull out the external antenna as shown in the following
figure. To receive stronger signals, you can adjust the direction of the rotatable external antenna.
Note:
The internal and the external antennas cannot be used at the same time. When the external
antenna is connected to the E510, you are not recommended to pull out the internal antenna.
It is recommended to use the external antenna at the site with weak signals.
When you want to watch TV programs of VHF, the external antenna should be connected to
the E510.

4
5
Indicator
Indicates the status of the E510.
Green, blinking twice every 3s: The E510 is powered on.
Green, blinking once every 3s: The E510 is registered to the GSM/GPRS/EDGE network.
Blue, blinking once every 3s: The E510 is registered to the WCDMA/HSDPA/HSUPA network.
Green, always on: The GPRS/EDGE connection is set up.
Blue, always on: The WCDMA connection is set up.
Cyan, always on: The HSDPA/HSUPA connection is set up.
Off: The E510 is removed from the PC.
Requirements for the PC
To use the E510, the PC must meet the following requirements:
Windows 2000 SP4, Windows XP SP2, Windows Vista
DirectX 9.0C or above
Windows Media Player 9 or above
Intel Pentium 4 2.0 GHz CPU or above
200 MB free disk space for software installation (2.5 GB free disk space is required for running
time-shifting recording function)
256 MB RAM (512 MB DDR RAM recommended, 1 GB DDR RAM recommended for Windows
Vista)
16-bit color display at 800 x 600 (32 MB video memory with supporting DirectX 3D
recommended)
Standard USB 2.0 interface

5
Preparing the E510
Install the USIM/SIM card
Insert the USIM/SIM card into the card slot. Make sure that the USIM/SIM card is properly inserted.
Connecting the E510 with a PC
Note: Power on your PC before connecting the E510 with the PC. Otherwise, the normal installation
of the E510 may be affected.
The following figure is sketches of the USB extension cables.
12
USB connector
Mini-USB connector

6
123
Auxiliary USB power cable
Main-USB extension cable
Mini-USB connector
1. Connect the Mini-USB connector to the E510.
2. Connect the USB connector(s) to the USB interface(s) of the PC.
Note: When you enjoy the data service and the TV service simultaneously, connect the USB
extension cable with two USB connectors to the PC, for sufficient power.

7
Installation Guide
The procedure for installing the management program depends on the operating system installed
on your PC. The following section takes Windows XP as an example.
Installing the E510
1. Connect the E510 and the PC with the USB cable.
2. The OS automatically detects and recognizes new hardware and starts the installation wizard.
If the auto-run program does not respond, find the AutoRun.exe file in the driver path. Then
double-click AutoRun.exe to run the program.
3. Follow the prompts of the installation wizard.
4. When the main management program is installed, the system automatically runs the TV Player
setup.
5. Follow the prompts to install the TV Player.
Note: Click Cancel to stop the installation of the TV Player, and the main management responds
normally. Then, you can click the TV icon on the interface of the management program to
install it.
Launching the Management Program
After the E510 is installed, the management program is launched automatically. Then every time the
E510 is connected to the PC, the management program is launched automatically.
You can also double-click the shortcut icon on the desktop to launch the management program.
To enjoy the TV service, you can click the TV icon on the interface of the management program to
open the TV Player.