Huawei FTK01 User manual

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
Issue
02
Date
2023-05-22
HUAWEI TECHNOLOGIES CO., LTD.

Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
i
Copyright © Huawei Technologies Co., Ltd. 2023. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
https://www.huawei.com
Email:
[email protected]

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
Preface
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
ii
Preface
General Safety Precautions
To ensure human and equipment safety, observe all the safety precautions marked on the
equipment and provided in this document. The WARNING, CAUTION, and NOTE marks in
this document do not cover all the safety precautions that must be followed; they only
supplement general safety precautions as a whole. Huawei is not liable for any consequence
that results from customers' violation of universal operation requirements or equipment design,
manufacturing, and usage safety standards.
Local Laws and Regulations
When operating a device, obey local laws and regulations.
Personnel Requirements
Engineers that are responsible for installing and maintaining Huawei equipment must be
trained, and have a thorough understanding of the proper operation methods and safety
precautions.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Conventions
Symbol
Description
Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
Preface
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
iii
Symbol
Description
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to
personal injury.
Calls attention to important information, best practices
and tips.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.
Human Safety
Do not look into the optical port without eye protection.
When drilling holes, take proper protection measures to avoid inhaling dust and prevent dust
from hurting your eyes.
When working at heights, take proper measures to prevent objects from falling down.
Change History
Issue
Date
Description
02
2022-05-22
Updated the product introduction and
optimized the installation procedure.
01
2022-12-30
This issue is the first official release.

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
Contents
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
iv
Contents
Preface ............................................................................................................................................... ii
1 Product Overview .........................................................................................................................1
2 Installation Preparation ...............................................................................................................2
2.1 Installation Tools and Accessories................................................................................................................................2
2.2 FMC2105-5U Structure................................................................................................................................................4
2.3 Installation Process.......................................................................................................................................................5
3 Stripping the Optical Cable ........................................................................................................6
3.1 1.2 mm x 1.6 mm Transparent Optical Cable ...............................................................................................................6
3.2 2 mm x 1.6 mm Transparent Optical Cable or Terminal Flexible Optical Cable..........................................................8
3.3 2 mm x 3 mm Terminal Flexible Optical Cable..........................................................................................................10
4 Processing the Optical Fiber .....................................................................................................11
5 Installing the Optical Fiber Connector ...................................................................................15
6 Disassembling Optical Fiber Connector (Optional) ............................................................18

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
1 Product Overview
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
1
1 Product Overview
Overview
The FTK01 suite contains FTTR fiber termination tools (optical cable stripper, coating
stripper, and fiber utter), and needs to be used with a dedicated field mountable connector
(FMC2105-SU). This product and solution does not require dedicated crimping tool or live
device, facilitating onsite termination of optical fibers. FTK01 can be used to provide
convenient, reliable, and elegant connection solutions for FTTx home connection, FTTR
indoor optical networking, and ONU onsite installation scenarios.
Features & Benefits
User friendly
Dedicated crimping tools and live devices, such as optical fiber fusion splicers, are not
required.
The one-time assembly success rate of skilled technicians is greater than or equal to 95%.
Optical fibers can be terminated on site within three minutes.
The FTK01 contains complete tools and is easy to carry. It needs to be used with an
FMC2105-SU connector to implement precise fixed-length assembly.
Unique design
An FMC2105-SU connector is white (YB816), same in color as Huawei master and
slave FTTR units and indoor ODN devices.
The FTK01 provides complete tools to ensure precise fixed-length stripping of fibers and
reliable assembly of the FMC2105-SU connector. The FTK01 can be used together with
an FMC2105-SU connector to terminate optical cables of 1.2 mm x 1.6 mm, 1.6 mm x 2
mm, and 2 mm x 3 mm onsite.
An FMC2105-SU connector is compatible with standard SC adapters.
Reliable performance
Reusable:An FMC2105-SU connector can be re-assembled for at least five times.
Long-term reliability:An FMC2105-SU connector passes the 500-hour accelerated aging
test at 75°C/95% RH. The FTK01 has assembly times not less than 1000.
Adaptability in extreme environments: In the real-time monitoring of optical indicators,
the optical fiber connectors (FMC2105-SU) pass the temperature cycle test (12 cycles) at
–40°C to +80°C, as well as the water immersion and salt spray tests.
High security and environment-friendly:An FMC2105-SU connector and the FTK01
comply with RoHS and REACH certification standards.

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
2 Installation Preparation
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
2
2 Installation Preparation
2.1 Installation Tools and Accessories
No.
Item
Qty.
1
Diagonal pliers
1 PCS
2
Alcohol
1 PCS
3
Lint-free tissue
2 PCS
4
2 mm x 3 mm optical cable stripper
1 PCS
5
2 mm x 1.6 mm optical cable stripper
1 PCS
6
Coating stripper
2 PCS
7
Optical fiber cutter
1 PCS

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
2 Installation Preparation
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
3
The FTK01 contains tools 5, 6, and 7.
Tools 1 (diagonal pliers) and 4 (2 mm x 3 mm optical cable stripper) are available in the open
market and need to be prepared by the customer.
Stripping the sheath of a 1.2 mm x 1.6 mm self-adhesive transparent optical cable: Use the diagonal
pliers to cut off the sheath in the middle, split the sheath by hand, and then cut off the sheath.
Stripping the sheath of a 2 mm x 3 mm flat drop cable: Use the 2 mm x 3 mm flat drop cable stripper
(available in the common market and needs to be prepared by the customer) to strip the sheath.
The structure of the coating stripper is as follows:

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
2 Installation Preparation
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
4
2.2 FMC2105-5U Structure
The FMC2105-SU is not included in the FTK01, and needs to be purchased separately and
used together with the FTK01.

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
2 Installation Preparation
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
5
2.3 Installation Process

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
3 Stripping the Optical Cable
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
6
3 Stripping the Optical Cable
3.1 1.2 mm x 1.6 mm Transparent Optical Cable
Step 1 Insert the optical cable into the boot.
Route the optical cable in from the smaller hole and out from the larger hole of the boot. Do
not install the optical cable in the wrong direction.
Step 2 Use diagonal pliers to cut the optical cable from the middle, remove the sheath, and expose
the bare fiber by 45–50 mm.

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
3 Stripping the Optical Cable
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
7
1. Stripping a 1.2 mm x 1.6 mm transparent optical cable: Use diagonal pliers to cut the sheath in the
middle and, split the sheath by hand, and then cut off the sheath. Do not use the 2 mm x 1.6 mm
optical cable stripper in the FTK01 to strip the sheath.
2. If no bare fiber is exposed after the sheath is removed, bend the sheath at the initial stripping point
by about 180 degrees until the optical fiber is broken and the bare fiber is exposed, as shown in the
following figure.
Step 3 Cut off the extra sheath of the optical fiber and ensure that the end faces of the sheath on both
sides are flush.
Do not use the tip of the diagonal pliers to cut the sheath. Otherwise, the optical fiber may be
damaged.
----End

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
3 Stripping the Optical Cable
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
8
3.2 2 mm x 1.6 mm Transparent Optical Cable or Terminal
Flexible Optical Cable
The method of stripping 2 mm x 1.6 mm transparent optical cables or terminal flexible optical cables is
the same.
Step 1 Insert the optical cable into the boot.
Route the optical cable in from the smaller hole and out from the larger hole of the boot. Do
not install the optical cable in the wrong direction.
Step 2 Use the optical cable stripper in the toolkit to strip the sheath of the optical cable and expose
the bare fiber by 45–50 mm.
Transparent optical cable

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
3 Stripping the Optical Cable
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
9
The fiber coating of a 2 mm x 1.6 mm transparent optical cable is tightly clung on the cable
sheath. Therefore, when using the 2 mm x 1.6 mm optical cable strippers to strip the cable,
you can apply a little more force or strip the cable in two sections.
Terminal flexible optical cable
----End

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
3 Stripping the Optical Cable
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
10
3.3 2 mm x 3 mm Terminal Flexible Optical Cable
Step 1 Insert the optical cable into the boot.
Route the optical cable in from the smaller hole and out from the larger hole of the boot. Do
not install the optical cable in the wrong direction.
Step 2 Use a 2 mm x 3 mm optical cable stripper to strip the sheath of the optical cable and expose
the bare fiber by 45–50 mm.
----End

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
4 Processing the Optical Fiber
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
11
4 Processing the Optical Fiber
The operations for processing optical fibers are the same for different types of optical cables. The
following uses a 1.2 mm x 1.6 mm transparent optical cable as an example.
Step 1 Open the coating stripper. On the side marked with "Remove fixed length coating", route the
bare fiber through the hole near the shaft until the optical cable is clamped into the coating
stripper.
Clean the tool before stripping the optical fiber. Otherwise, the residual coating may cause
incomplete stripping of the optical fiber.
Do not leave a gap between the optical cable and the stripper.

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
4 Processing the Optical Fiber
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
12
Step 2 Rotate the shaft to close the coating stripper. Hold the shaft end (edge side) of the coating
stripper with one hand and horizontally pull out the optical cable with the other hand to strip
off the coating.
Do not exert excessive force when holding the shaft end (edge side) of the stripper.
Step 3 After confirming that the fiber is intact, clean the stripped fiber using alcohol.
Gently press the upper and lower, left and right sides with your fingers to 60 degrees, three times in each
direction to confirm that there are no fiber cracks.
Step 4 Rotate the optical cable fastener. For 1.2 mm x 1.6 mm optical cables, select the 1.2 mm
channel. For 2 mm x 1.6 mm and 2 mm x 3 mm optical cables, select the 2.0 mm channel.
The narrow channel of the optical cable fixing piece is applicable to 1.2 mm x 1.6 mm optical
cables, and the wide channel is applicable to 2 mm x 1.6 mm and 2 mm x 3 mm optical
cables.

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
4 Processing the Optical Fiber
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
13
Step 5 Insert the optical cable whose coating is stripped into the slot on the side marked with
"Remove fixed length coating". Do not leave a gap between the optical cable and the
fixed-length limiting surface.
When inserting the optical cable into the slot, pay attention to the direction of the optical
cable.
1.2 mm x 1.6 mm transparent optical cable, horizontally placed
2 mm x 1.6 mm transparent optical cable, horizontally placed
2 mm x 1.6 mm terminal flexible optical cable, horizontally placed
2 mm x 3 mm terminal flexible optical cable, vertically placed
Step 6 Unlock the fiber cutter, push out the knife edge through the slider at the bottom of the fiber
cutter, and open the case for storing the cut fiber.

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
4 Processing the Optical Fiber
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
14
Step 7 Insert the optical cable whose coating is stripped into the slot on the side marked with
"Remove fixed length coating". Do not leave a gap between the optical cable and the
fixed-length limiting surface.
----End

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
5 Installing the Optical Fiber Connector
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
15
5 Installing the Optical Fiber Connector
The procedures for installing fiber connectors for different types of optical cables are similar. The
following uses a 1.2 mm x 1.6 mm transparent optical cable as an example.
Step 1 Install the matching piece for the 1.2 mm x 1.6 mm transparent optical cable at the optical
cable stripping point. Ensure that the top end face of the matching piece is flush with the
stripped end face of the optical cable.
Perform this step only for 1.2 mm x 1.6 mm transparent optical cables. For other types of optical
cables, skip this step.
When clamping the optical cable into the matching piece, ensure that the optical cable is completely
clamped.
Step 2 Ensure that the lock of the optical fiber connector is in the ON position. Push the optical cable
into the main body of the optical fiber connector until it reaches the end. In this case, the bare
fiber is slightly bent. Pay attention to the direction of the optical cable when pushing it into
the connector.