Huawei AR150 series User manual

Huawei AR150&200 Series Enterprise Routers
Quick Start Guide
Issue 03
Date 2012-06-10
HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i

About This Document
Intended Audience
This document provides an overall description of the AR150/200, details about each chassis and
board, cables available to the device, lists of components and basic configuration.
This document is intended for:
lNetwork planning engineers
lHardware installation engineers
lCommissioning engineers
lOn-site maintenance engineers
lSystem maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
DANGER
Indicates a hazard with a high level of risk, which if not
avoided, will result in death or serious injury.
WARNING
Indicates a hazard with a medium or low level of risk, which
if not avoided, could result in minor or moderate injury.
CAUTION
Indicates a potentially hazardous situation, which if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.
TIP
Indicates a tip that may help you solve a problem or save
time.
NOTE
Provides additional information to emphasize or supplement
important points of the main text.
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide About This Document
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii

Change History
Changes between document issues are cumulative. Therefore, the latest document issue contains
all the changes in previous issues.
Changes in Issue 03 (2012-06-10)
Based on 02 (2012-04-20), this issue has the following updates:
lAR156
lAR158E
Changes in Issue 02 (2012-04-20)
Based on 01 (2011-12-30), this issue has the following updates:
lThe power outage survival description is added to the rear panel of AR207V&AR207V-P.
lAR207G-HSPA+7.
Changes in Issue 01 (2011-12-30)
Initial commercial release.
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide About This Document
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii

Contents
About This Document.....................................................................................................................ii
1 AR150/200 Overview.....................................................................................................................1
1.1 Naming Rule.......................................................................................................................................................2
1.2 Device Structure.................................................................................................................................................3
1.3 Indicator Description..........................................................................................................................................6
1.4 Physical Specifications.....................................................................................................................................11
2 Product Installation.....................................................................................................................13
2.1 Installation Preparations...................................................................................................................................14
2.2 Installing the Device.........................................................................................................................................15
2.3 Connecting the Device......................................................................................................................................20
2.4 Powering on the Device....................................................................................................................................23
3 Logging In to the Router............................................................................................................25
3.1 Logging In to the Router Through the Web Network Management System....................................................26
3.2 Logging In to the Router Through the Console Port........................................................................................27
3.3 Logging In to the Router Using Telnet.............................................................................................................29
4 Connecting to the Internet.........................................................................................................30
4.1 Going Online Using a Static IP Address..........................................................................................................31
4.2 Going Online Using a Dynamic IP Address.....................................................................................................33
5 How to Obtain Documentation and Technical Support......................................................36
6 FAQs...............................................................................................................................................37
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide Contents
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iv

1 AR150/200 Overview
About This Chapter
This section describes the naming rule, appearance and structure, indicators, and physical
specifications of the AR150/200.
1.1 Naming Rule
This section describes the meanings of the AR150/200 names.
1.2 Device Structure
This section describes the structure of the AR150/200.
1.3 Indicator Description
This section describes the indicators on the AR150/200 front panel.
1.4 Physical Specifications
This section describes the physical specifications and system configuration of the AR150/200.
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1

1.1 Naming Rule
This section describes the meanings of the AR150/200 names.
Figure 1-1 shows the AR150/200 naming rule.
Figure 1-1 AR150/200 naming rule
【AR】【B1 B2 B3 B4】【C1】【-D1】
Example:
AR 207 V - P
AR 207 G - HSPA+7
1、
2、
Table 1-1 explains the AR150/200 naming rule.
Table 1-1 AR150/200 naming rule
Field Description
B1 0 (AR150/200): indicates a low-end case-shaped product.
B2 B2: Indicates the hardware difference. Selected from 1 and 2. A larger
value indicates higher performance.
B3 B3: Indicates the product level, ranging from 0 to 5.
lAR150: fixed as 5.
lAR200: fixed as 0.
B4 B4：Indicates the fixed upstream interface.
l1: FE
l6: ADSL-B
l7: ADSL-A
l8: G.SHDSL
C1 C1: Composed of one to four upper-case letters, indicating value-
added functions.
lW: WLAN
lV: Voice
lG: 3G
lE: Enhanced edition
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2

Field Description
D1 D1: Indicates the function differences.
lA: AC power supply (Default configurations can be omitted)
lD: DC power supply
lHSPA+7: WCDMA
lP: PoE
1.2 Device Structure
This section describes the structure of the AR150/200.
Figure 1-2 and Figure 1-3 show the AR150/200 models.
Figure 1-2 AR150 models
1245
3
7
6
8
1
2
45
3
7
6
8
1
2
45
7
6
38
1
2
45
7
6
38
AR150
Series
Product
Series Model WAN
Port
LAN
Port Appearance Remark
AR
151 1 FE 4 FE
AR
157 4 FE
1AD
SL2+
Anne
xA/M
4 FE
4 FE
AR
156
AR
158E
1AD
SL2+
Anne
xB
1G.S
HDSL
ATM and
EFM
modes
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3

Figure 1-3 AR200 non-3G models
Product
Series Model WAN
Port
LAN
Port Appearance Remark
AR
201 1 FE 8 FE
AR
206
AR
207 8 FE
AR
207V 8 FE
AR
207
V-P
8 FE
AR
208E 8 FE
AR200
Series
1245
3
7
6
1
2
45
3
7
6
1
2
4 53
76
1
2
4 53
76
9 10
1
2
4 53
76
9 10 11
1
2
45
3
7
6
8 FE
1G.S
HDSL
ATM and
EFM
modes
1AD
SL2+
Anne
xA/M
1AD
SL2+
Anne
xA/M
Voice
ports:
4FXS+1FX
OSurvivabl
e remote
site
telephony
(SRST)
Voice
ports:
4FXS+1FX
PoE
Survivable
remote
site
telephony
(SRST)
1AD
SL2+
Anne
xB
1AD
SL2+
Anne
xA/M
8
8
8
8
8
8
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4

Figure 1-4 AR200 3G models
13
14 5
3
26 7
12
13
AR200
Series
Product
Series Model WAN
Port
LAN
Port Appearance Remark
1AD
SL2+
Anne
xA/M
AR
207G
-
HSP
A+7
8 FE
1: CON/AUX port 2: WAN port
lAR151, AR201: FE
lAR156, AR157, AR206,
AR207, AR207V,
AR207V-P, AR207G-
HSPA+7: ADSL
lAR158E, AR208E:
G.SHDSL
3: LAN FE port
lAR151, AR156, AR157,
AR158E: 4 FE ports
lAR201. AR206, AR207,
AR207V, AR207V-P,
AR208E, AR207G-HSPA
+7: 8 FE ports
NOTE
FE0 can be used as a WAN port
so that double WAN ports can be
provided.
4: RESET
CAUTION
The Reset button is used for
resetting the device manually.
lPress and hold down:
Restore the Factory
Settings.
lPress: Reset the system.
Resetting the device will cause
service interruption; therefore,
confirm the action before you
reset the device.
5: DC power jack
NOTE
The AR150/200 is powered by a
12 V external power adapter .
6: Silkscreen
7: Ground screw 8: cable retention clip 9: Four FXS ports
10: FXO port 11: PoE port 12: SIM card slot
13: 3G antenna
Table 1-2 describes the attributes of G.SHDSL interfaces.
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5

Table 1-2 Attributes of G.SHDSL interfaces
Attribute Description
Standards compliance G.991.2 Annex A and Annex B
Transmission rate 5.696 Mbit/s per pair
Transmission distance 3 km
1.3 Indicator Description
This section describes the indicators on the AR150/200 front panel.
Indicators
The indicators on the AR150/200 front panels vary according to the product models. Table
1-3 lists the indicator differences.
Table 1-3 Indicator differences
Difference Description
WAN port silkscreen lAR151 and AR201: WAN FE
lAR156, AR157, AR206, AR207, AR207V, AR207V-P, and
AR207G-HSPA+7: ADSL
lAR158E, AR208E: G.SHDSL
LAN ports lAR151,AR156, AR157 and AR158E: Four, numbered LAN0
to LAN3
lAR201, AR206, AR207, AR207V, AR207V-P, AR208E, and
AR207G-HSPA+7: Eight, numbered LAN0 to LAN7
Voice port indicator lAR207V and AR207V-P: Five, numbered FXS0 to FXS3,
FXO
lOther models: None
3G port indicator lAn AR207G-HSPA+7 provides three indicators that
indicating 3G, 2G, and WWAN.
lOther models of the AR150/200 provide no 3G port indicator.
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6

Indicator Description
NOTE
lThe front panels of AR151, AR156, AR157 and AR158E are the same except for the WAN port
indicator silkscreen. Figure 1-5 shows the AR158E appearance.
lCompared with AR207V, AR207V-P has a PoE port indicator. Figure 1-6 shows the AR207V-P
appearance.
lThe front panels of AR201, AR206, AR207, and AR208E are the same except for the WAN port
indicator silkscreen. Figure 1-7 shows the AR208E appearance.
Figure 1-5 AR158E front panel
23 4 5 6 7 8
10
Figure 1-6 AR207V-P front panel
2 3 4 5 6 7 8
10
9
1
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7

Figure 1-7 AR208E front panel
2 3 4 5 6 7 8
10
Figure 1-8 describes indicators on the AR207G-HSPA+7 front panel.
Figure 1-8 Indicators on the AR207G-HSPA+7 front panel
2 3 4 5 678
10
111213
Table 1-4 Indicator description
Numbe
r
Indicator Color Description
1PoE Green If the indicator is steady on, the PoE power supply
is normal.
If the indicator is off, no PoE power supply is
available.
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8

Numbe
r
Indicator Color Description
2PWR Green If the indicator is steady on, the system power
supply is normal.
If the indicator is off, no system power supply is
available.
3 SYS Red and
green
If the indicator blinks green once every 2s (0.5
Hz), the system is running properly.
If the indicator blinks green once every 0.25s (4
Hz), the system is powering on or restarting.
If the indicator is red, a fault that affects services
has occurred and cannot be rectified
automatically. The fault needs to be rectified
manually.
If the indicator is off, the software is not running
or is being reset.
4 USB Red and
green
If the indicator is green, devices have been
deployed by using the USB disk.
If the indicator blinks green, the router is being
deployed using the USB disk.
If the indicator is red, the router is failed to be
deployed using the USB disk.
If the indicator is off, the USB disk is not inserted,
the USB interface fails, or the indicator fails.
5 PPP Green If the indicator is steady on, a PPP connection is
set up.
If the indicator is off, no PPP connection is set up.
6 VPN Green If the indicator is steady on, the VPN service is
available.
If the indicator is off, the VPN service is
unavailable.
7 LINK Green If the indicator is steady on, a link is connected to
the WAN port.
If the indicator is off, no link is connected to the
WAN port.
ACT Green If the indicator blinks green, the WAN port is
transmitting or receiving data.
If the indicator is off, the WAN port is not
transmitting or receiving data.
8 LAN green If the indicator is steady on, a link is connected to
the LAN port.
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9

Numbe
r
Indicator Color Description
If the indicator blinks green, the LAN port is
transmitting or receiving data.
If the indicator is off, no link is connected to the
LAN port.
9 FXS0-FXS3 Green If the indicator is steady on, the FXS channel is
being occupied by a call.
If the indicator is off, the FXS channel is idle.
FXO Green If the indicator is steady on, the FXO channel is
being occupied by a call.
If the indicator is off, the FXO channel is idle.
10 USB port N/A
11 3G Green If the indicator is steady on, the 3G signal strength
is high.
If the indicator blinks once every 2s, the 3G signal
strength is poor.
If the indicator blinks once every 0.25s, the 3G
signal strength is medium.
12 2G Green If the indicator is steady on, the 2G signal strength
is high.
If the indicator blinks once every 2s, the 2G signal
strength is poor.
If the indicator blinks once every 0.25s, the 2G
signal strength is medium.
13 WWAN Green If the indicator is steady on, the 3G or 2G service
has been connected or activated.
If the indicator is blinking, 3G or 2G service data
is being transmitted or received on the port.
If the indicator is off, the 3G or 2G service has
not been connected or activated.
NOTE
lNumber 1: Only AR207V-P has this indicator.
lNumber 7: The WAN port indicators have different silkscreens (such as WAN FE, ADSL, and
G.SHDSL).
lNumber 8: FE0 can be used as a WAN port so that double WAN ports can be provided.
lNumber 9: Only the AR207V and AR207V-P provide this indicator.
lNumbers 11, 12 and 13: Only the AR207G-HSPA+7 provides these indicators.
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10

1.4 Physical Specifications
This section describes the physical specifications and system configuration of the AR150/200.
Table 1-5 Physical specifications
Item Description
Dimensions (width x depth x height) Without rack-mounting ears installed: 300.0 mm x
216.4 mm x 44.0 mm
With rack-mounting ears installed: 482.6 mm x
216.4 mm x 44.0 mm
Maximum power consumption lAR151: 11.6W
lAR156: 16.1W
lAR157: 15.2W
lAR158E: 14.7W
lAR201: 12.3W
lAR206: 16.1W
lAR207: 16.1W
lAR207V: 22.8W
lAR207V-P: 22.6W
lAR208E: 14.7W
lAR207G-HSPA+7: 17.1W
Weight 2.2 kg
Operating temperature 0°C-40°C
Relative humidity 5% RH to 90% RH, non-condensing
Altitude 0 m-3000 m
AC input
voltage
Rated voltage 100 V AC-240 V AC, 50/60 Hz
Maximum voltage
range
90 V AC-264 V AC, 47/63 Hz
Table 1-6 System configuration
Model Processor Memory Flash Memory
AR151 2-core: 533 MHz 512 MB 512 MB
AR156 2-core: 533 MHz 512 MB 512 MB
AR157 2-core: 533 MHz 512 MB 512 MB
AR158E 2-core: 533 MHz 512 MB 512 MB
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11

Model Processor Memory Flash Memory
AR201 2-core: 533 MHz 512 MB 512 MB
AR206 2-core: 533 MHz 512 MB 512 MB
AR207 2-core: 533 MHz 512 MB 512 MB
AR207V 2-core: 533 MHz 512 MB 512 MB
AR207V-P 2-core: 533 MHz 512 MB 512 MB
AR208E 2-core: 533 MHz 512 MB 512 MB
AR207G-HSPA+7 2-core: 533 MHz 512 MB 512 MB
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 1 AR150/200 Overview
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12

2 Product Installation
About This Chapter
This section describes the method of installing and connectingAR150/200 series products.
2.1 Installation Preparations
This section lists the tools and accessories for installing the AR150/200.
2.2 Installing the Device
This section describes AR150/200 installation scenarios and installation methods.
2.3 Connecting the Device
This section describes how to connect AR150/200 series products.
2.4 Powering on the Device
This section provides the checklist used to check the AR150/200 before powering on it.
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 2 Product Installation
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13

2.1 Installation Preparations
This section lists the tools and accessories for installing the AR150/200.
Tools
Claw hammer Utility knife COAX crimping tool
Diagonal pliers RJ45 crimping tool Wire stripper
Network cable tester Multimeter Measuring tape
Ladder Hammer drill Vacuum cleaner
ESD wrist strap Level Floating nut mounting bar
Flat-head screwdriverPhilips screwdriverMarker pen
Accessories
Rubber pad Floating nut M4 screw: fixes brackets to
chassis
M6 screw: fixes chassis into
cabinet Bracket Ground cable
Remote Antenna
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 2 Product Installation
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14

2.2 Installing the Device
This section describes AR150/200 installation scenarios and installation methods.
NOTE
The installation scenarios and installation methods of all AR150/200 series products are the same. This
section uses AR207G-HSPA+7 as an example.
The antenna interfaces on a AR207G-HSPA+7 can connect to whip antennas and remote antennas.
lWhip antennas are directly installed on an AR router and are recommended when a router is desk
installed or wall mounted.
lIndoor remote antennas have a 3 m long feed line. Indoor remote antennas are recommended when
an AR router is installed in a cabinet or rack, Indoor remote antennas need to be ordered separately
if needed.
Placing Chassis on the Desk
1. Before placing the AR150/200 on the desk, attach rubber pads onto each of the four recessed
corner areas on the bottom of the chassis.
2. AR207G-HSPA+7 needs two whip antennas, which must be vertical to the desktop. (Only
applies to 3G models).
Huawei AR150&200 Series Enterprise Routers
Quick Start Guide 2 Product Installation
Issue 03 (2012-06-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15