Huawei H122-372 User manual

Quick Start
Démarrage rapide
Installationsanleitung
Avvio rapido
Snelstartgids
Início rápido
Inicio rápido

Contents
English.......................................................................................................................................................1
Français................................................................................................................................................... 12
Deutsch....................................................................................................................................................24
Italiano..................................................................................................................................................... 36
Nederlands.............................................................................................................................................. 47
Português................................................................................................................................................ 58
Español....................................................................................................................................................69
i

Product overview
5 7
6
8
9
10
11
12
1
2
3
4
1
Landline phone port(Optional.
The actual product appearance
and functions prevail.)
2
LAN port
3
LAN/WAN port
4
Power input
5
SIM card slot
6
Reset button
7
Power button
8
Ambient light strip
9
H button
10
Wi-Fi® indicator
11
4G signal indicator
12
5G signal indicator
English
1

Setup
1Make sure you use the correct SIM card.
mini-SIM (2FF) micro-SIM (3FF) nano-SIM (4FF)
2Open the SIM card cover.
3Insert the SIM card gently into the SIM card slot in the direction shown in the figure below until it
clicks. Then close the SIM card cover.
•To remove the SIM card, gently press the SIM card in until it clicks. The card will
automatically pop out.
•Do not insert or remove a SIM card when the router is running, as this may affect
performance or damage the SIM card.
4Connect the power adapter to the router.
2

The indicators will turn on when the router has successfully connected to a network.
5G signal indicator
Green: Strong.
Yellow: Moderate.
Red: Weak.
4G signal indicator
Green: Strong.
Yellow: Moderate.
Red: Weak.
If both the 5G signal indicator and 4G signal indicator are off, it indicates there is no network
connection. Please refer to the FAQs in this guide.
3

Connecting to your router's Wi-Fi network
Wi-Fi Password:
Wi-Fi Password:
Wi-Fi Name:XXXXXXXX
Wi-Fi Name(5GHz):XXXXX
Wi-Fi Password:YYYYYYYY
Once the router has connected to a mobile data network, you can connect your computer or mobile
phone to the router's Wi-Fi network to access the Internet. Please refer to the label on the bottom of the
router for the default Wi-Fi network name (Wi-Fi Name) and password (Wi-Fi Password).
•When the Wi-Fi indicator is steady on, Wi-Fi is enabled. To enable or disable Wi-Fi, refer to
the router's web-based management page.
•Ensure that you promptly change the Wi-Fi network name and password on the web-based
management page to prevent unauthorized access to your Wi-Fi network. Once you have
changed the password, you will need to reconnect to the router's Wi-Fi network.
•If you accidentally pressed the H button and the Wi-Fi indicator starts to flash, wait for it to
stop flashing. This may take about two minutes.
4

Managing your router
Password:
zzz
XXX.XXX.X.X
XXX.XXX.X.X
IP:XXX.XXX.X.X
Password:zzz
Password:
zzz
You can manage the router using the web-based management page. Please refer to the label on the
bottom of the router for the default IP address, password and so on.
More information can be found in the web-based management page.
•Ensure that you promptly change the default login password for the web-based management
page to prevent unauthorized users from changing the router's settings.
•You can also manage your router using the HUAWEI AI Life app. Scan the QR code below to
download.
5

Optional configurations
The features described in this section are for reference purposes only. Your router may not support all of
these features.
Connecting computer
You can connect a computer to the router to access the Internet.
Accessing the Internet through an Ethernet port
You can connect the router to a wall-mounted Ethernet port using an Ethernet cable to connect to the
Internet.
Configure the relevant settings on the web-based management page before connecting to the Internet
through an Ethernet port. For details, please contact your carrier.
6