Huawei eA660 Series User manual

eLTE2.2 Wireless Access Device eA660
Configuration Guide
Issue
V1.2
Date
2013-11-25
HUAWEI TECHNOLOGIES CO., LTD.

Issue (2011¨C6¨C30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without
prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not
be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all
statements, information, and recommendations in this document are provided "AS IS" without warranties,
guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
http://www.huawei.com
Email:
[e-mail]

eLTE2.2 Wireless Access Device eA660
Configuration Guide
Contents
Contents
1 Change History......................................................................................................................1-1
2 Overview ................................................................................................................................2-1
2.1 About This Document............................................................................................................................. 2-1
2.2 Purpose .................................................................................................................................................. 2-1
2.3 Product Features..................................................................................................................................... 2-1
3 Configuration Overview ......................................................................................................3-1
3.1 Device Configurability ........................................................................................................................... 3-1
3.2 Introduction to the CPEs......................................................................................................................... 3-1
3.2.1 Introduction to Wireless Access CPEs ............................................................................................ 3-1
3.3 Configuration Principles and Instructions................................................................................................ 3-2
4 Material Configuration.........................................................................................................4-1
4.1 Configuration Overview ......................................................................................................................... 4-1
4.2 Configuration of Wireless Access CPEs .................................................................................................. 4-1
4.2.1 Configuration of the CPE Host....................................................................................................... 4-1
4.2.2 Configuration of PoE Power Adapters............................................................................................ 4-2
4.2.3 Configuration of CPE Installation Materials................................................................................... 4-4
5 Appendix................................................................................................................................5-1
5.1 Acronyms and Abbreviations .................................................................................................................. 5-1
5.2 PoE Power Adapter Cables for Different Countries.................................................................................. 5-1

eLTE2.2 Wireless Access Device eA660
Configuration Guide
Contents
1 Change History
Date
Version
Change Description
Author
2013/4/19
V1.0
Released the first version.
Zeng Xianqin
2013/5/9
V1.1
Updated the models of auxiliary
materials that can be quoted.
Zeng Xianqin
2013/11/25
V1.2
Updated Configuration of PoE Power
Adapters.
Zeng Xianqin

eLTE2.2 Wireless Access Device eA660
Configuration Guide
Contents
2 Overview
2.1 About This Document
This document provides guidelines for the configuration of eLTE2.2 wireless access products.
It introduces Huawei's current supply capability to marketing and supply chain personnel and
describes the components and configuration principles and instructions of eLTE2.2 wireless
access products.
2.2 Purpose
This document is for internal use only. It provides instructions for actual sales and shipment.
2.3 Product Features
Platformization and serialization
The eLTE2.2 wireless access CPEs are based on the same platform. They support updates,
quick customization, and quick delivery.
The outdoor CPE adopts architecture of router plus modem, the two of which are connected
through a standard mini PCIe interface. By applying modems of different standards and bands
can be selected, we can ensure the quick delivery of product series and update of the wireless
access technology used.

3 Configuration Overview
3.1 Device Configurability
The eLTE2.2 wireless access CPEs are sold by set. Customers can choose CPE hosts with
different standards and bands, as well as different accessories. The CPE hosts cannot be
configured during sales. This guide is used mainly to provide lists of products that can be
quoted and shipped.
3.2 Introduction to the CPEs
3.2.1 Introduction to Wireless Access CPEs
The eA660 series wireless products are LTE outdoor CPEs. They can be deployed outdoors to
convert between LTE wireless data and Ethernet data.
The eA660 series support LTE R8. They provide both wired and wireless Internet access and
the following services:
Data services
Security services
Maintenance and management
Data routing
Figure 3-1 shows the appearance of an eA660 outdoor CPE.

Figure 3-1 eA660 outdoor CPE
The eA660 mainly features the following:
Support for LTE and band customization
Dynamic Host Configuration Protocol (DHCP) and NetworkAddress Translation (NAT)
IEEE 802.11 b/g/n WLAN(unavailable when LTE works at B40)
Routing behind MS
Firewall functions
Support for Windows XP, Windows Vista, Linux, and MAC
Compatible with IE, Firefox, Chrome, and Safari
Management over the web UI
Device management using TR-069
Built-in LTE high-gain antennas for great portability
External antennas ports
LED indicators that show device status
Exposed antenna ports
3.3 Configuration Principles and Instructions
The CPE hosts themselves do not have configuration items. This document is used to help
realize the quotation and shipment of wireless access CPEs though the configurator
(CFG) without site survey.
The CFG lists the CPE host standards and bands, as well as accessory types and
quantities, which provides reference for quotation and shipment. The accessories selection
should be based on market demands.
Promptly and accurately convey product customization requirements to the headquarters
through an RM workflow (http://rm.huawei.com) and communicate with the headquarters to

determine the customization fees. The customization fees are manually added to the
configurator.
The configurator shows the sales parts and their unique list prices. For different projects, the
discount may vary. Refer to the supply chain opinions during contract review to
confirm whether the order quantity meets the order condition.

4 Material Configuration
The part numbers are for your reference only. They need further confirmation and update.
4.1 Configuration Overview
The top layer for eLTE2.2 wireless access CPEs' part numbers is 01060602. The BOM list is
structured as follows:
Part Number
Description
01060602
Wireless Access Unit
02230QKP
eA660,Wireless Access Unit Main Equipment
02230QKQ
eA660,POE Power
02230QKR
eA660 Site Materials
4.2 Configuration of Wireless Access CPEs
4.2.1 Configuration of the CPE Host
Part number: 02230QKP
Description: eA660,Wireless Access Unit Main Equipment

External
Model
No.
B-Part
Number
Description
Quantity
(Piece)
Configuration Principle
eA660-
160
51070DN
Y
Wireless user
Equipment,eA660-
160,TDD LTE Band 38
Band 40,Gray,Customer
Premises
Equipment,External
antenna
1
Mandatory, built-in antenna
LTE TDD:
2300 MHz to 2400 MHz
2570 MHz to 2620 MHz
The product works with a SIM card, which is
sold separately in principle. To meet different
customer demands, the CFG provides blank
SIM cards, card burners, and the card-burning
service. For details, see the configuration
principles and instructions of the external CFG.
Sales part; this part number can be used
for quotation and shipment.
eA660-
135
51070DG
B
Wireless user
Equipment,eA660-
135,TDD LTE Band 42
Band43,Gray,Customer
Premises
Equipment,External
antenna
1
Mandatory, built-in antenna
LTE TDD:
3400 MHz to 3600 MHz
3600 MHz to 3800 MHz
The product works with a SIM card, which is
sold separately in principle. To meet different
customer demands, the CFG provides blank
SIM cards, card burners, and the card-burning
service. For details, see the configuration
principles and instructions of the external CFG.
Sales part; this part number can be used
for quotation and shipment.
4.2.2 Configuration of PoE Power Adapters
Part number: 02230QKQ
Description: eA660,POE Power
External
Model No.
B-Part
Number
Description
Quantity
(Piece)
Configuration Principle
W0ACPSE
00
02220015
Adapter,-10degC-
45degC,90V-
264V,54V/650mA,A
C 2pin/RJ45
8pin,CE/CCC,
Terminal Dedicated
1
Optional
If this PoE power adapter is required, a 2 m
external power cable is required for each
piece. The external power cable varies by
country.
Sales part; this part number can be used for
quotation and shipment.

External
Model No.
B-Part
Number
Description
Quantity
(Piece)
Configuration Principle
C0C7EU20
0
04044216
Power
Cable,European AC
Power Cable
250V2.5A,2.0m,PCS
M,H03VVH2-F-
0.5mm^2(2C),C7SF,
Black
1
Optional
Used with 02220015; select the correct style
based on the country
One power cable for each 02220015.
Sales part; this part number can be used for
quotation and shipment.
C0C7NA20
0
04044497
Power
Cable,America AC
Power Cable
125V7A,2.0m,PAS
M,18NISPT-
1(2C),C7SF,Black
C0C7AU20
0
04044577
Power
Cable,America AC
Power Cable
125V7A,2.0m,PAS
M,18NISPT2(2C),C
7SF,Black
C0C7UK20
0
04044533
Power Cable, Britain
AC Power Cable
250V2.5A,2.0m,PG
AM,H05VVH2-F-
0.75mm^2(2C),C7S
F,Black
C0C7JP200
04044496
Power Cable,Japan
AC Power Cable
125V7A,2.0m,PAS
M,VCTFK-
0.75mm^2(2C),C7S
F,Black
CPC7SF201
04043491
Power Cable,China
AC Power Cable
250V2.5A,2.0m,PA
SM,227IEC53(RVV
)0.75mm^2(2C),C7S
F,Black
0405G025
Power Cords
Cable,South Africa
AC Power
250V2.5A,2m,PDA
M,H03VVH2-F-
0.75^2(2C),C7SF

External
Model No.
B-Part
Number
Description
Quantity
(Piece)
Configuration Principle
04050956
Power Cord
Cable,Brazil AC
Power
Cable,250V2.5A,2m
,PCSM,H05VVH2-F
2*0.75^2(2C),C7SF
04050956
Power Cord
Cable,Brazil AC
Power
Cable,250V2.5A,2m
,PCSM,H05VVH2-F
2*0.75^2(2C),C7SF
04045094
Power Cords
Cable,India AC
Power
250V2.5A,2.0m,PCS
M-I,IS 694-
0.75^2(2C),C7S,Bla
ck
4.2.3 Configuration of CPE Installation Materials
Part number: 02230QKR
Description: eA660 Site Materials
Part Number
Description
02230QKR
eA660 Site Materials
02230UXF
eA660 Cable and site installation
accessories materials
No sales part indication; middle-layer
part number
02230UXK
eA660 Electric power cable
No sales part indication; middle-layer
part number
02230UXM
eA660 Installation parts
No sales part indication; middle-layer
part number
Configuration of Network Cables and Site Installation Accessories
Part number: 02230UXF
Description: eA660 Cable and site installation accessories materials

External
Model
No.
B-Part
Number
Description
Quan
tity
Configuration Principle
STWICAB
SFTP5
25050238
Symmetry Twist
Cable,100ohm,SFTP
CAT5E,0.53mm,24
AWG,4Pairs,Black,
Outdoor Cable
10 m
Used with 51079289, 51079286, or 51079282;
optional
By default, the cables for the PoE and Ethernet
ports are 10 m in total.
Frontline personnel can change the cable length
based on the project requirement.
Deployed outdoors; for countries with Low
Smoke Zero Halogen (LSZH) requirements,
purchased locally. If the cable cannot be
purchased locally, report using the OR workflow.
Shipped in rolls
Sales part; this part number can be used for
quotation and shipment.
EDSABA
G00
14080232
Network Interface
Connector,8PIN,8bit
,Shielded,Crystal
Model
Connector,23-
24AWG Single
Solid Wire,CAT6
5 pcs
Shielded network port connector
Used with the network cable 25050238
By default, five pieces are provided for the PoE
and Ethernet ports in total.
When only applied on the PoE or Ethernet port,
provide three pieces.
The frontline personnel determine what to apply
based on customer requirements.
Sales part; this part number can be used for
quotation and shipment.
E000CMC
00
30040055
Plastic
Bag,Q/DKBA88400
070,Dual-Layer
Squeezing Antistatic
Self-Sealing Bag
1 pc
Applicable to all countries
Used with the cable tie 21101259, naked
crimping terminal 14170023, or network port
connector 14080232
Sales part; this part number can be used for
quotation and shipment.
CBLTIEG
T00
21101259
DKBA0.480.0457,C
able
Tie,300*3.6mm,Blac
k,PA66,Anti-
Ultraviolet And
Anti-Freeze,(GT-
300IUV)
50 pcs
Deployed outdoors
Used with the network cable 25050238
Sales part; this part number can be used for
quotation and shipment.
XELECB
W07
14170023
Naked Crimping
Terminal,OT,6mm^2
,M6,Tin
Plating,Insulated
Ring
Terminal,12~10AW
G,yellow
3 pcs
Ground OT terminal
Used with the CPE host
Sales part; this part number can be used for
quotation and shipment.

Configuration of Electric Power Cables
Part number: 02230UXK
Description: eA660 Electric power cable
External
Model
No.
B-Part
Number
Description
Quantity
Configuration Principle
C1006YG0
0
25030191
Wire,450/750V,6022
7 IEC 02(RV)
6mm^2,Yellow/Gree
n,44A
1 m
The 25030191 is a ground cable deployed
outdoors in markets adopting non-American
standards; one cable for each eA660
The 25030576 is a power cable deployed
outdoors in markets adopting the American
standards; one cable for each eA660
By default, the ground cable is 1 m long and
used with the eA660 (51079289, 51079286,
or 51079282).
Shipped in rolls
Sales part; this part number can be used for
quotation and shipment.
C10006G0
0
25030576
Power
Cable,600V,UL1015
,5.261mm^2,10AW
G,Green,42.5A
P-6mm^2-
YellowGre
en-LSZH
25030699
Power
Cable,450V/750V,H
07Z-
K&UL3386,6mm^2,
10AWG,Yellow/Gre
en,58A,Low Smoke
Zero Halogen Cable
1 m
Applicable to all countries except China;
meets LSZH requirements.
Shipped in rolls
One cable for each eA660 (51079289,
51079286, or 51079282)
Sales part; this part number can be used for
quotation and shipment.
Configuration of the Installation Parts
Part number: 02230UXM
Description: eA660 Installation parts

External
Model No.
B-Part
Number
Description
Quantity
Configuration Principle
E00DKBA00
21150800
Engineering
Installation
Kit,DKBA0480280
0_48_140,quick-
lock hoop,Suitable
for installing the
pole(diameter 48 ~
114mm),pole
mounting,Hexagon
fastening
2 pcs
Installation part for pole-mounted
installation. Selected based on the
diameter of the pole, For details, see the
"Description" column.
Used with the pole-mounted and wall-
mounted installation parts. Two pieces of
21150800, 21150804, or 21150810 for
one 21150905.
By default, the 21150800 is provided.
Sales part; this part number can be used
for quotation and shipment.
E00DKBA04
21150804
Engineering
Installation
Kit,DKBA0480280
0_114_400,quick-
lock hoop,Suitable
for installing the
pole(diameter 114
~ 381mm),pole
mounting,Hexagon
fastening
E00DKBA10
21150810
Engineering
Installation
Kit,DKBA0480280
0_114_220,quick-
lock hoop,Suitable
for installing the
pole(diameter 114
~ 220mm),pole
mounting,Hexagon
fastening
ESCACSS00
21150905
Engineering
Installation
Kit,DKBA4070384
5.ASM,Small Cell
Al Casting
Support
Solid ,Small
Cell,Multifunctiona
l
Installation,Wedge
connection
1 pc
Optional
One 21150905 for each eA660.
Sales part; this part number can be used
for quotation and shipment.

External
Model No.
B-Part
Number
Description
Quantity
Configuration Principle
ESCACAS0
0
21150903
Engineering
Installation
Kit,DKBA4070392
3.ASM,Small cell
Al Casting
Adjustable-degree
solid,Small
cell,Multifunctional
Installation,Wedge
connection.
1 pc
Angle-adjusting installation part.
Optional.
The 21150903 must be used with the
21150905.
One 21150903 for each eA660.
Sales part; this part number can be used
for quotation and shipment.