Huawei AP3010DN-AGN Instruction Manual

Huawei
AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and
Maintenance Guide
Issue 11
Date 2015-05-18
HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://enterprise.huawei.com
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i

About This Document
Intended Audience
This document describes hardware features of AP3x10xN, 5x10xN, 5x30xN, 6x10xN and
7x10xN, and provides basic installation methods.
This document is intended for:
lNetwork planning engineers
lHardware installation engineers
lCommissioning engineers
lOnsite maintenance engineers
lSystem maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
Indicates a potentially hazardous situation
which, if not avoided, could result in
equipment damage, data loss, performance
deterioration, or unanticipated results.
NOTICE is used to address practices not
related to personal injury.
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide About This Document
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii

Symbol Description
NOTE
Calls attention to important information, best
practices and tips.
NOTE is used to address information not
related to personal injury, equipment damage,
and environment deterioration.
Change History
Changes between document issues are cumulative. The latest document issue contains all
changes made in previous issues.
Issue 11 (2015-05-18)
This version has the following updates:
The following information is modified:
lAdded the command to check AP running status in V200R006C00.
lAdded descriptions about PoE fault troubleshooting.
Issue 10 (2014-12-05)
This version has the following updates:
The following information is added:
l1.4 Ordering Information.
Issue 09 (2014-07-30)
This version has the following updates:
The following information is modified:
lOptimized the installation steps.
The following information is added:
lLogging in to the AP using STelnet.
Issue 08 (2013-04-10)
This version has the following updates:
The following information is added:
lAP5030DN and AP5130DN installation guide
lNote: The network cable cannot exceed 100 meters.
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide About This Document
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii

Issue 07 (2014-01-15)
This version has the following updates:
Optimized the manual.
Issue 06 (2013-09-30)
This version has the following updates:
The following information is modified:
lAP's default IP address and login password
Issue 05 (2013-06-29)
This version has the following updates:
The following information is modified:
lFigure for converting SMA connectors to type—N connectors
Issue 04 (2013-04-30)
This version has the following updates:
The following information is modified:
lFigure of the sheet metal mounting brackets delivered with APs
Issue 03 (2013-01-30)
This version has the following updates:
The following information is added:
lDescriptions about power adapters delivered with APs
lSection: Removing an AP
Issue 02 (2012-12-31)
This version has the following updates:
The following information is added:
lPower adapter cable connection figure
Issue 01 (2012-10-31)
Initial commercial release
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide About This Document
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iv

Contents
About This Document.....................................................................................................................ii
1 Indoor AP Overview.....................................................................................................................1
1.1 Device Structure.............................................................................................................................................................1
1.2 Indicator Description......................................................................................................................................................4
1.3 Basic Specifications........................................................................................................................................................7
1.4 Ordering Information....................................................................................................................................................10
2 AP Installation.............................................................................................................................14
2.1 Preparing for Installation..............................................................................................................................................14
2.2 Installation Flowchart...................................................................................................................................................15
2.3 Unpacking the Equipment............................................................................................................................................17
2.4 Determining the Installation Position...........................................................................................................................18
2.5 Installing the AP...........................................................................................................................................................19
2.5.1 Wall Mounting...........................................................................................................................................................20
2.5.2 Ceiling Mounting.......................................................................................................................................................22
2.5.3 T-rail Mounting.........................................................................................................................................................23
2.5.4 Removing an AP........................................................................................................................................................24
2.6 Connecting Cables........................................................................................................................................................25
2.7 Installing the Security Lock..........................................................................................................................................29
2.8 Checking the AP After Installation..............................................................................................................................29
2.9 Powering on the AP......................................................................................................................................................30
3 Logging In to the AP...................................................................................................................31
3.1 Logging In to the AP Through the Console Port..........................................................................................................31
3.2 Logging In to the AP Using STelnet............................................................................................................................31
3.3 Logging In to the AP Using Telnet..............................................................................................................................33
3.4 Logging In to the AP Using a Web Client....................................................................................................................34
4 Hardware Failures.......................................................................................................................35
4.1 A Device Fails to Be Powered On................................................................................................................................35
4.2 An Optical Interface Cannot Turn Up..........................................................................................................................36
5 Appendix.......................................................................................................................................38
5.1 On-site Cable Assembly and Installation.....................................................................................................................38
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide Contents
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
v

5.1.1 Cable Assembly Precautions.....................................................................................................................................38
5.1.2 Assembling Power Cables.........................................................................................................................................39
5.1.3 Assembling Ethernet Cables......................................................................................................................................48
5.1.4 Installing Cable Accessories......................................................................................................................................62
5.1.5 Replacing the Mold of the Crimping Pliers...............................................................................................................77
5.2 Environmental Requirements for Device Operation....................................................................................................81
5.2.1 Environmental Requirements for an Equipment Room............................................................................................81
5.2.2 Requirements for Power Supply................................................................................................................................88
5.3 Equipment Grounding Specifications...........................................................................................................................91
5.3.1 General Grounding Specifications.............................................................................................................................91
5.3.2 Grounding Specifications for an Equipment Room..................................................................................................92
5.3.3 Grounding Specifications for Devices.......................................................................................................................92
5.3.4 Grounding Specifications for Communications Power Supply.................................................................................93
5.3.5 Grounding Specifications for Signal Cables.............................................................................................................93
5.3.6 Specifications for Laying Out Grounding Cables.....................................................................................................94
5.4 Engineering Labels for Cables.....................................................................................................................................94
5.4.1 Introduction to Labels................................................................................................................................................95
5.4.2 Engineering Labels for Optical Fibers.....................................................................................................................103
5.4.3 Engineering Labels for Network Cables.................................................................................................................106
5.4.4 Engineering Labels for User Cables........................................................................................................................107
5.4.5 Engineering Labels for Power Cables.....................................................................................................................108
5.5 Guide to Using Optical Modules................................................................................................................................111
5.6 Fault Tag.....................................................................................................................................................................114
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide Contents
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
vi

1 Indoor AP Overview
1.1 Device Structure
Figures in Table 1-1 show the appearance of indoor APs.
CAUTION
There is a scald warning label attached on the device, warning you not to touch the device after
the device has been operating for a long time.
Table 1-1 Appearance of indoor APs
Product Model Appearance
AP3010DN-AGN
AP5010DN-AGN
AP5010SN-GN
AP6010DN-AGN
AP6010SN-GN
12367
ConsoleETH/PoEDefaultDC 12V
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1

Product Model Appearance
AP5030DN
265 74 1
Console GE1 GE0/PoE DC 12V
AP5130DN
265 7
10
4 1
Console GE1 GE0/PoE DC 12V
AP6310SN-GN
2.4G Console ETH/PoE Default DC 12V
8 3 1116 2
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2

Product Model Appearance
AP7110DN-AGN
9 3 1 8211 6 7
Console ETH/PoE Default DC 12V
AP7110SN-GN
Console ETH/PoE DC 12VDefault
11 6 2 73 1 8
Table 1-2 describes interfaces on indoor APs.
Table 1-2 Interfaces on indoor APs
No. Name Description
1DC 12 V DC power socket: connects a 12 V power
adapter to the AP.
2 Default Reset button: restores factory settings if you
hold down the button more than 3s.
3 ETH/PoE 10/100/1000M bit/s interface: connects to the
wired Ethernet. The interface can connect to
a PoE power supply to provide power for the
AP.
4 GE1 10/100/1000M bit/s interface: connects to the
wired Ethernet.
5 GE0/PoE 10/100/1000M bit/s interface: connects to the
wired Ethernet. The interface can connect to
a PoE power supply to provide power for the
AP.
6 Console Console interface: connects to a maintenance
terminal for AP configuration and
management.
7 Security slot Connects to a security lock.
8 2.4 GHz antenna port Connects a 2.4 GHz antenna to the AP.
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3

No. Name Description
95 GHz antenna port Connects a 5 GHz antenna to the AP.
10 Dual-band antenna
port
Connects a dual-band antenna to the AP.
11 Device ground screw Connects a ground cable to the AP.
1.2 Indicator Description
Indoor AP series products provide a single indicator or multiple indicators.
lThe AP3010DN-AGN, AP5010DN-AGN, AP5010SN-GN, AP5030DN, AP5130DN,
AP6010DN-AGN, and AP6010SN-GN provide only a single indicator.
lThe AP6310SN-GN, AP7110DN-AGN, and AP7110SN-GN provide multiple indicators:
SYS indicator, Link indicator, and Wireless indicator.
The following table describes indicators on indoor APs.
NOTE
lIndicator colors may vary slightly at different temperature.
lAfter a Fit AP is powered on, you can run the led off command on the AC to turn off all AP indicators.
To restore the indicators to normal working status, run the led on command. Indicators on a Fat AP
cannot be turned off using the led off command.
Single indicator and SYS indicator
Table 1-3 Descriptions about the single indicator and SYS indicator
Type Color Status Description
Default
status after
power-on
Green Steady on The AP is just powered on and the software is not
started yet.
Software
startup
status
Green Steady on
after
blinking
once
After the system is reset and starts uploading the
software, the indicator blinks green once. Until the
software is uploaded and started, the indicator
remains steady green.
Running
status
Green Blinking
once every
2s (0.5 Hz)
lThe system is running properly, the Ethernet
connection is normal, and STAs are associated
with the AP.
lThe system enters the Uboot CLI.
Blinking
once every
5s (0.2 Hz)
The system is running properly, the Ethernet
connection is normal, and no STA is associated with
the AP. The system is in low power consumption
state.
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4

Type Color Status Description
Alarm Green Blinking
once every
0.25s (4
Hz)
lThe software is being upgraded.
lAfter the software is uploaded and started, the AP
working in Fit AP mode requests to go online on
the AC and maintains this state until it goes
online successfully on the AC (before the
CAPWAP link is established).
lThe AP working in Fit AP mode fails to go online
on the AC (the CAPWAP link disconnects).
Fault Red Steady on A fault that affects services has occurred, such as a
DRAM detection failure or system software loading
failure. The fault cannot be automatically rectified
and must be rectified manually.
Link indicator
Table 1-4 Descriptions about the Link indicator
Type Color Status Description
LINK Green Steady on The system is running properly, the Ethernet
connection is normal, and no data is being
transmitted.
ACT Green Blinking The system is running properly, the Ethernet
connection is normal, and the AP is transmitting
data. The indicator blinks more quickly when more
data is being transmitted.
Wireless indicator
Table 1-5 Traffic volume indicator
Color Status Description
Yellow/green Off Radios are disabled, and no STA is connected
to the AP.
Yellow/green Steady on The AP has STAs connected to the 2.4 GHz
radio or 5 GHz radio, but no data is being
transmitted.
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5

Color Status Description
Green Blinking The AP has STAs connected to the 2.4 GHz
radio and is transmitting data. The indicator
blinks more quickly when more data is being
transmitted.
Yellow Blinking The AP has STAs connected to the 5 GHz
radio and is transmitting data. The indicator
blinks more quickly when more data is being
transmitted.
Yellow/green Blinking
alternatively
The AP has STAs connected to both the 2.4
GHz radio and 5 GHz radio. The indicator
blinks more quickly when more data is being
transmitted.
Table 1-6 Wireless bridge indicator
Color Status Description
Yellow/green Off The AP is not transmitting or receiving data
or the signal strength is extremely low.
Blinking once every
2s (0.5 Hz)
The AP is transmitting or receiving data
normally, and the signal strength is low.
Blinking green once
every 0.25 seconds (4
Hz)
The AP is transmitting or receiving data
normally, and the signal strength is medium.
Steady on The AP is transmitting or receiving data
normally, and the signal strength is high.
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6

NOTE
When the WDS/mesh function is enabled on an AP, the blinking frequency of its Wireless LED indicates
the receive signal strength on the WDS/mesh connection by default. After you connect an AP to a WDS/
mesh network, you can run the wifi-light { signal-strength | traffic } command on the AC to make the
Wireless LED blinking frequency indicate receive signal strength or service traffic rate.
lwifi-light signal-strength:
lIf the mesh function is enabled on the AP, the blinking frequency of the Wireless LED reflects
the weakest signal strength of all neighboring APs.
lIf WDS is enabled on an AP, the blinking frequency of the Wireless LED reflects the strength
of signals received from a WDS AP.
lIf the AP works in leaf mode, the blinking frequency of the Wireless LED reflects the strength
of signals received from a middle AP.
lIf the AP works in middle mode, the blinking frequency of the Wireless LED reflects the
strength of signals received from a root AP.
lIf the AP works in root mode, the blinking frequency of the Wireless LED reflects the weakest
signal strength of middle APs.
lwifi-light traffic: allows the Wireless LED to reflect the service traffic volume on the radio.
The Fat AP does not support WDS/Mesh functions; therefore, the Wireless indicator of the Fat AP does
not indicate the signal strength.
The AP6310SN-GN does not support WDS/mesh functions; therefore, the Wireless indicator of the
AP6310SN-GN does not indicate the signal strength.
1.3 Basic Specifications
Table 1-7 Basic specifications of the AP3010DN-AGN, AP5010SN-GN, AP5010DN-AGN,
AP6010DN-AGN, and AP6010SN-GN
Item Description
Technical
specifications
Dimensions (H x W x
D)
50 mm x 180 mm x 180 mm
Weight 0.4 kg
System memory l256 MB DDR2
l32 MB flash memory
Power specifications Power input lDC 12 V ± 10%
lPoE power supply: -48 V DC (in
compliance with IEEE 802.3af/at)
NOTE
The AP6010DN-AGN and AP6010SN-GN cannot
use the PoE power supply and DC power supply
simultaneously.
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7

Item Description
Maximum power
consumption
lAP3010DN-AGN: 9.5 W
lAP5010DN-AGN: 9.5 W
lAP5010SN-GN: 6.0 W
lAP6010DN-AGN: 10.2 W
lAP6010SN-GN: 6.5 W
NOTE
The actual maximum power consumption depends
on local laws and regulations.
Environment
specifications
Operating
temperature and
altitude
-60 m to +1800 m: -10°C to +50°C
1800 m to 5000 m: Temperature decreases by
1°C every time the altitude increases 220 m.
Storage temperature -40°C to +70°C
Operating humidity 5% to 95% (non-condensing)
IP grade IP31
Atmospheric
pressure
70 kPa to 106 kPa
Table 1-8 Basic specifications of the AP5030DN and AP5130DN
Item Description
Technical
specifications
Dimensions (H x W x
D)
53 mm x 220 mm x 220 mm
Weight 1.0 kg
System memory l256 MB DDR2
l32 MB flash memory
Power specifications Power input lDC 12 V ± 10%
lPoE power: -48 V DC (in compliance with
IEEE 802.3af/at)
Maximum power
consumption
11.5 W
NOTE
The actual maximum power consumption depends
on local laws and regulations.
Environment
specifications
Operating
temperature and
altitude
-60 m to +1800 m: -10°C to +50°C
1800 m to 5000 m: Temperature decreases by
1°C every time the altitude increases 220 m.
Storage temperature -40°C to +70°C
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8

Item Description
Operating humidity 5% to 95% (non-condensing)
IP grade IP41
Atmospheric
pressure
70 kPa to 106 kPa
Table 1-9 Basic specifications of the AP6310SN-GN
Item Description
Technical
specifications
Dimensions (H x W x
D)
35 mm x 150 mm x 130 mm
Weight 0.6 kg
System memory l128 MB DDR2
l32 MB flash memory
Power specifications Power input lDC 12 V ± 10%
lPoE power supply: -48 V DC (in
compliance with IEEE 802.3af/at)
NOTE
The AP6310SN-GN cannot use the PoE power
supply and DC power supply simultaneously.
Maximum power
consumption
8.3 W
NOTE
The actual maximum power consumption depends
on local laws and regulations.
Environment
specifications
Operating
temperature and
altitude
-60 m to +1800 m: -10°C to +50°C
1800 m to 5000 m: Temperature decreases by
1°C every time the altitude increases 220 m.
Storage temperature -40°C to +70°C
Operating humidity 5% to 95% (non-condensing)
IP grade IP31
Atmospheric
pressure
70 kPa to 106 kPa
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9

Table 1-10 Basic specifications of the AP7110SN-GN and AP7110DN-AGN
Item Description
Technical
specifications
Dimensions (H x W x
D)
45 mm x 200 mm x 200 mm
Weight 1.0 kg
System memory l256 MB DDR3
l32 MB flash memory
Power specifications Power input lDC 12 V ± 10%
lPoE power: -48 V DC
–AP7110SN-GN: IEEE 802.3af/at
–AP7110DN-AGN: IEEE 802.3at
Maximum power
consumption
lAP7110DN-AGN: 15.7 W
lAP7110SN-GN: 8.7 W
NOTE
The actual maximum power consumption depends
on local laws and regulations.
Environment
specifications
Operating
temperature and
altitude
-60 m to +1800 m: -10°C to +55°C
1800 m to 5000 m: Temperature decreases by
1°C every time the altitude increases 220 m.
Storage temperature -40°C to +70°C
Operating humidity 5% to 95% (non-condensing)
IP grade IP41
Atmospheric
pressure
70 kPa to 106 kPa
1.4 Ordering Information
To place an order, contact the Huawei local office.
Part
Number
Description
2355829 Assembling Components,AP3010DN-AGN-CN,AP3010DN-AGN
Mainframe(11n,General AP Indoor,2x2 Double Frequency,Built-in
Antenna,AC/DC adapter(CN))
2356921 Assembling Components,AP-D4-FAT-S,AP-D4-FAT-S Bundle(Including
AP3010DN-AGN-FAT-DC*4,AC/DC adapters(CN))
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10

Part
Number
Description
2355547 Assembling Components,AP5010DN-AGN,AP5010DN-AGN Mainframe
(11n,General AP Indoor,2x2 Double Frequency,Built-in Antenna,No AC/
DC adapter)
2355674 Assembling Components,AP5010SN-GN,AP5010SN-GN Mainframe
(11n,General AP Indoor,2x2 Single Frequency,Built-in Antenna,No AC/DC
adapter)
2356281 Assembling Components,AP5010DN-AGN-USA,AP5010DN-AGN
Bundle(11n,General AP Indoor,2x2 Double Frequency,Built-in
Antenna,AC/DC adapter(US),United States dedicated)
2357629 Assembling Components,AP5010DN-AGN-FAT-DC,AP5010DN-AGN
Bundle(FAT AP,11n,General AP Indoor,2x2 Double Frequency,Built-in
Antenna,AC/DC adapter)
2357632 Assembling Components,AP5010SN-GN-FAT-DC,AP5010SN-GN
Bundle(FAT AP,11n,General AP Indoor,2x2 Single Frequency,Built-in
Antenna,AC/DC adapter)
2358264 Assembling Components,AP5010DN-AGN-DC,AP5010DN-AGN Bundle
(11n,General AP Indoor,2x2 Double Frequency,Built-in Antenna,AC/DC
adapter)
2358263 Assembling Components,AP5010SN-GN-DC,AP5010SN-GN Bundle
(11n,General AP Indoor,2x2 Single Frequency,Built-in Antenna,AC/DC
adapter)
2358108 Assembling Components,AP5030DN,AP5030DN Mainframe
(11ac,General AP Indoor,3x3 Double Frequency,Built-in Antenna,No AC/
DC adapter)
2358109 Assembling Components,AP5030DN-DC,AP5030DN Bundle
(11ac,General AP Indoor,3x3 Double Frequency,Built-in Antenna,AC/DC
adapter)
02350CPM Assembling Components,AP5030DN-USA,AP5030DN Bundle
(11ac,General AP Indoor,3x3 Double Frequency,Built-in Antenna,AC/DC
adapter(US),United States dedicated)
2358560 Assembling Components,AP5030DN-FAT-DC,AP5030DN Bundle(FAT
AP,11ac,General AP Indoor,3x3 Double Frequency,Built-in Antenna,AC/
DC adapter)
2358561 Assembling Components,AP5130DN,AP5130DN Mainframe
(11ac,General AP Indoor,3x3 Double Frequency,External Antenna,No AC/
DC adapter)
2358562 Assembling Components,AP5130DN-DC,AP5130DN Bundle
(11ac,General AP Indoor,3x3 Double Frequency,External Antenna,AC/DC
adapter)
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11

Part
Number
Description
2358563 Assembling Components,AP5130DN-FAT-DC,AP5130DN Bundle(FAT
AP,11ac,General AP Indoor,3x3 Double Frequency,External Antenna,AC/
DC adapter)
2354196 Assembling Components,AP6010DN-AGN,AP6010DN-AGN Mainframe
(11n,General AP Indoor,2x2 Double Frequency,Built-in Antenna,No AC/
DC adapter)
2354197 Assembling Components,AP6010SN-GN,AP6010SN-GN Mainframe
(11n,General AP Indoor,2x2 Single Frequency,Built-in Antenna,No AC/DC
adapter)
2354198 Assembling Components,AP6310SN-GN,AP6310SN-GN,AP6310SN-GN
Mainframe(11n,Distributed AP Indoor,Single Frequency,No AC/DC
adapter)
2356284 Assembling Components,AP6310SN-GN-USA,AP6310SN-GN Bundle
(11n,Distributed AP Indoor,Single Frequency,AC/DC adapter(US),United
States dedicated)
2356280 Assembling Components,AP6010DN-AGN-USA,AP6010DN-AGN
Bundle(11n,General AP Indoor,2x2 Double Frequency,Built-in
Antenna,AC/DC adapter(US),United States dedicated)
2357628 Assembling Components,AP6010DN-AGN-FAT-DC,AP6010DN-AGN
Bundle(FAT AP,11n,General AP Indoor,2x2 Double Frequency,Built-in
Antenna,AC/DC adapter)
2357631 Assembling Components,AP6010SN-GN-FAT-DC,AP6010SN-GN
Bundle(FAT AP,11n,General AP Indoor,2x2 Single Frequency,Built-in
Antenna,AC/DC adapter)
2358260 Assembling Components,AP6010DN-AGN-DC,AP6010DN-AGN Bundle
(11n,General AP Indoor,2x2 Double Frequency,Built-in Antenna,AC/DC
adapter)
2358259 Assembling Components,AP6010SN-GN-DC,AP6010SN-GN Bundle
(11n,General AP Indoor,2x2 Single Frequency,Built-in Antenna,AC/DC
adapter)
2358262 Assembling Components,AP6310SN-GN-DC,AP6310SN-GN Bundle
(11n,Distributed AP Indoor,Single Frequency,AC/DC adapter)
2355553 Assembling Components,AP7110DN-AGN,AP7110DN-AGN Mainframe
(11n,Enhanced AP Indoor,3x3 Double Frequency,External Antenna,No
AC/DC adapter)
2355680 Assembling Components,AP7110SN-GN,AP7110SN-GN Mainframe
(11n,Enhanced AP Indoor,3x3 Single Frequency,External Antenna,No AC/
DC adapter)
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12

Part
Number
Description
02350CVQ Assembling Components,AP7110DN-AGN-FAT-DC,AP7110DN-AGN
Bundle(FAT AP,11n,Enhanced AP Indoor,3x3 Double Frequency,External
Antenna,AC/DC adapter)
2356279 Assembling Components,AP7110DN-AGN-USA,AP7110DN-AGN
Bundle(11n,Enhanced AP Indoor,3x3 Double Frequency,External
Antenna,AC/DC adapter(US),United States dedicated)
2358266 Assembling Components,AP7110DN-AGN-DC,AP7110DN-AGN Bundle
(11n,Enhanced AP Indoor,3x3 Double Frequency,External Antenna,AC/
DC adapter)
2358265 Assembling Components,AP7110SN-GN-DC,AP7110SN-GN Bundle
(11n,Enhanced AP Indoor,3x3 Single Frequency,External Antenna,AC/DC
adapter)
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide 1 Indoor AP Overview
Issue 11 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13